Updates for systemd

This adds a service file and instructions for getting this to start at boot

README.md

@@ -1,15 +1,16 @@
 # TC²-BBS Meshtastic Version
 
-[![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/B0B1OZ22Z)
+[](https://ko-fi.com/B0B1OZ22Z)
 
 This is the TC²-BBS system integrated with Meshtastic devices. The system allows for message handling, bulletin boards, mail systems, and a channel directory.
 
 ## Setup
 
 ### Docker installation
-TC²-BBS Meshtastic is available on Docker Hub
 
-[![Docker HUB](https://icon-icons.com/downloadimage.php?id=151885&root=2530/PNG/128/&file=docker_button_icon_151885.png)](https://hub.docker.com/r/thealhu/tc2-bbs-mesh)
+If you're a Docker user, TC²-BBS Meshtastic is available on Docker Hub!
+
+[](https://hub.docker.com/r/thealhu/tc2-bbs-mesh)
 
 ### Requirements
 
@@ -22,8 +23,7 @@ TC²-BBS Meshtastic is available on Docker Hub
 1. Clone the repository:
 
 ```sh
-git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.git
+cd ~git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.gitcd TC2-BBS-mesh
-cd TC2-BBS-mesh
 ```
 
 2. Set up a Python virtual environment:  
@@ -34,13 +34,11 @@ python -m venv venv
 
 3. Activate the virtual environment:  
 
-
 - On Windows:  
 
 ```sh  
 venv\Scripts\activate  
 ```
-
 - On macOS and Linux:
 
 ```sh
@@ -56,20 +54,18 @@ pip install -r requirements.txt
 5. Set up the configuration in `config.ini`:  
 
   **[interface]**  
-  
+  If using `type = serial` and you have multiple devices connected, you will need to uncomment the `port =` line and enter the port of your device.   
-  If using `type = serial` and you have multiple devices connected, you will need to uncomment the `port =` line and enter in the port of your device. 
 
   Linux Example:  
   `port = /dev/ttyUSB0`   
 
-  Windows Example:
+Windows Example:  
   `port = COM3`   
 
-  If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device 
+If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device   
 
   **[sync]**  
-  
+  Enter a list of other BBS nodes you would like to sync messages and bulletins with. Separate each by comma and no spaces as shown in the example below.   
-  Enter in a list of other BBS nodes you would like to sync messages and bulletins with. Separate each by comma and no spaces as shown in the example below. 
   You can find the nodeID in the menu under `Radio Configuration > User` for each node, or use this script for getting nodedb data from a device:  
 
   [Meshtastic-Python-Examples/print-nodedb.py at main · pdxlocations/Meshtastic-Python-Examples (github.com)](https://github.com/pdxlocations/Meshtastic-Python-Examples/blob/main/print-nodedb.py)  
@@ -83,18 +79,59 @@ type = serial
 
 [sync]  
 bbs_nodes = !f53f4abc,!f3abc123  
-```
+````
 
 ### Running the Server
 
 Run the server with:
 
 ```sh
-python server.py
+python server.py```  
 ```
 
 Be sure you've followed the Python virtual environment steps above and activated it before running.
 
+
+## Automatically run at boot
+
+If you would like to have the script automatically run at boot, follow the steps below:
+
+1. **Edit the service file**
+  
+  First, edit the mesh-bbs.service file using your preferred text editor. The 3 following lines in that file are what we need to edit:
+  
+  ```sh
+  User=pi
+  WorkingDirectory=/home/pi/TC2-BBS-mesh
+  ExecStart=/home/pi/TC2-BBS-mesh/venv/bin/python3 /home/pi/TC2-BBS-mesh/server.py
+  ```
+  
+  The file is currently setup for a user named 'pi' and assumes that the TC2-BBS-mesh directory is located in the home directory (which it should be if the earlier directions were followed)
+  
+  We just need to replace the 4 parts that have "pi" in those 3 lines with your username.
+  
+2. **Configuring systemd** 
+  From the TC2-BBS-mesh directory, run the following commands:
+  
+  `sh sudo cp mesh-bbs.service /etc/systemd/system/`
+  
+  `sh sudo systemctl enable mesh-bbs.service`
+  
+  `sh sudo systemctl start mesh-bbs.service`
+  
+  The service should be started now and should start anytime your device is powered on or rebooted. You can check the status ofk the service by running the following command:
+  
+  `sh sudo systemctl status mesh-bbs.service`
+  
+  If you need to stop the service, you can run the following:
+  
+  `sh sudo systemctl stop mesh-bbs.service`
+  
+  If you make changes to the watchlist.txt file, you will need to restart the service with the following command:
+  
+  `sh sudo systemctl restart mesh-bbs.service`
+  
+
 ## Features
 
 - **Mail System**: Send and receive mail messages.
@@ -111,8 +148,7 @@ Make selections by sending messages based on the letter or number in brackets -
 
 A video of it in use is available on our YouTube channel:
 
-[![TC²-BBS-Mesh](https://img.youtube.com/vi/d6LhY4HoimU/0.jpg)](https://www.youtube.com/watch?v=d6LhY4HoimU)
+[](https://www.youtube.com/watch?v=d6LhY4HoimU)
-
 
 ## Thanks
 

mesh-bbs.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=TC²-BBS Meshtastic Version
+After=multi-user.target
+
+[Service]
+Type=simple
+Restart=always
+RestartSec=20
+User=pi
+WorkingDirectory=/home/pi/TC2-BBS-mesh
+ExecStart=/home/pi/TC2-BBS-mesh/venv/bin/python3 /home/pi/TC2-BBS-mesh/server.py
+
+[Install]
+WantedBy=multi-user.target