Update README.md

README.md fixes

README.md

@@ -22,34 +22,37 @@ If you're a Docker user, TC²-BBS Meshtastic is available on Docker Hub!
 
 1. Clone the repository:
    
-```sh
+   ```sh
-cd ~git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.gitcd TC2-BBS-mesh
+   cd ~
-```
+   git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.git
+   cd TC2-BBS-mesh
+   ```
 
 2. Set up a Python virtual environment:  
    
-```sh  
+   ```sh
-python -m venv venv
+   python -m venv venv
-```  
+   ```
 
 3. Activate the virtual environment:  
    
-- On Windows:  
+   - On Windows:  
    
-```sh  
+   ```sh
-venv\Scripts\activate  
+   venv\Scripts\activate  
-```
+   ```
-- On macOS and Linux:
    
-```sh
+   - On macOS and Linux:
-source venv/bin/activate
+   
-```
+   ```sh
+   source venv/bin/activate
+   ```
 
 4. Install the required packages:  
    
-```sh  
+   ```sh
-pip install -r requirements.txt
+   pip install -r requirements.txt
-```
+   ```
 
 5. Set up the configuration in `config.ini`:  
    
@@ -59,10 +62,10 @@ pip install -r requirements.txt
    Linux Example:  
    `port = /dev/ttyUSB0`   
    
-Windows Example:  
+   Windows Example:  
    `port = COM3`   
    
-If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device   
+   If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device.  
    
    **[sync]**  
    Enter a list of other BBS nodes you would like to sync messages and bulletins with. Separate each by comma and no spaces as shown in the example below.   
@@ -71,15 +74,16 @@ If using type = tcp you will need to uncomment the hostname = 192.168.x.x line a
    [Meshtastic-Python-Examples/print-nodedb.py at main · pdxlocations/Meshtastic-Python-Examples (github.com)](https://github.com/pdxlocations/Meshtastic-Python-Examples/blob/main/print-nodedb.py)  
    
    Example Config:  
-```ini  
-[interface]  
-type = serial  
-# port = /dev/ttyUSB0  
-# hostname = 192.168.x.x  
    
-[sync]  
+   ```ini
-bbs_nodes = !f53f4abc,!f3abc123  
+   [interface]  
-````
+   type = serial  
+   # port = /dev/ttyUSB0  
+   # hostname = 192.168.x.x  
+   
+   [sync]  
+   bbs_nodes = !f53f4abc,!f3abc123  
+   ```
 
 ### Running the Server
 
@@ -91,7 +95,6 @@ python server.py```
 
 Be sure you've followed the Python virtual environment steps above and activated it before running.
 
-
 ## Automatically run at boot
 
 If you would like to have the script automatically run at boot, follow the steps below:
@@ -113,24 +116,35 @@ If you would like to have the script automatically run at boot, follow the steps
 2. **Configuring systemd** 
    From the TC2-BBS-mesh directory, run the following commands:
    
-  `sh sudo cp mesh-bbs.service /etc/systemd/system/`
+   ```sh
+   sudo cp mesh-bbs.service /etc/systemd/system/
+   ```
    
-  `sh sudo systemctl enable mesh-bbs.service`
+   ```sh
+   sudo systemctl enable mesh-bbs.service
+   ```
    
-  `sh sudo systemctl start mesh-bbs.service`
+   ```sh
+   sudo systemctl start mesh-bbs.service
+   ```
    
    The service should be started now and should start anytime your device is powered on or rebooted. You can check the status ofk the service by running the following command:
    
-  `sh sudo systemctl status mesh-bbs.service`
+   ```sh
+   sudo systemctl status mesh-bbs.service
+   ```
    
    If you need to stop the service, you can run the following:
    
-  `sh sudo systemctl stop mesh-bbs.service`
+   ```sh
+   sudo systemctl stop mesh-bbs.service
+   ```
    
    If you make changes to the watchlist.txt file, you will need to restart the service with the following command:
    
-  `sh sudo systemctl restart mesh-bbs.service`
+   ```sh
-  
+   sudo systemctl restart mesh-bbs.service
+   ```
 
 ## Features