mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-09-22 09:07:32 -07:00
25 lines
2.1 KiB
Markdown
25 lines
2.1 KiB
Markdown
|
---
|
|||
|
|
id: non-aerial
|
|||
|
|
title: Non-aerial factors affecting transmission
|
|||
|
|
sidebar_label: Non-aerial factors
|
|||
|
|
slug: /hardware/non-aerial
|
|||
|
|
---
|
|||
|
|
|
|||
|
|
Unless you're using your devices in a vacuum with clear line of sight between aerials:
|
|||
|
|
- Weather (temperature, humidity & air pressure),
|
|||
|
|
- Transmission power, spreading and other associated channel factors,
|
|||
|
|
- Number of nodes within reach in the mesh (affects retries consequent duty cycle hit),
|
|||
|
|
- Absorption by materials (with varying degrees attenuation, by material and depth),
|
|||
|
|
- Reflection off surfaces (and channeled through material tunnels, including warm / cold air tunnels commonly present in the atmosphere),
|
|||
|
|
- Diffraction around obstacles (over forests and around corners).
|
|||
|
|
|
|||
|
|
### Environmental
|
|||
|
|
|
|||
|
|
For a bit of light reading on environmental research:
|
|||
|
|
- [RF attentuation in vegetation](https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.833-9-201609-I!!PDF-E.pdf) (yes really); if you wander through the woods wondering how your RF is bouncing off leaves dependent on their variety, and wind speed … well you do, now.
|
|||
|
|
- [RF attentuation with various building materials](https://www.ofcom.org.uk/__data/assets/pdf_file/0016/84022/building_materials_and_propagation.pdf).
|
|||
|
|
- This one by ITU again is very detailed in its [analysis of the drivers of attenuation](https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.2040-1-201507-I!!PDF-E.pdf) (I wasn’t aware that all EMF radiation exhibits reflection / transmission characteristics akin to light hitting a material boundary. So, depending on the angle of incidence, material and the EMF wavelength, it will be reflected and / or transmitted through).
|
|||
|
|
- These RF bands are also made more [noisy by adjacent LTE](https://www.ofcom.org.uk/__data/assets/pdf_file/0023/55922/lte-coexistence.pdf)
|
|||
|
|
|
|||
|
|
In summary - wavelengths in Europe fair well in plain sight, curve over not-so-tall obstacles (including trees), reflect of surfaces at low angles of incidence. They go through humans without much attenuation; but not brick or stone or anything much above glass / kevlar. Oh, and don’t sit under an LTE tower and expect it to be plain sailing.
|