Channel settings are an integral part of the way your devices communicate across the mesh. If you have mismatched channel settings, your radios will be unable to communicate with one another.
<!--- Used to construct a globally unique channel ID. The full globally unique ID will be: "name.id" where ID is shown as base36. Assuming that the number of meshtastic users is below 20K (true for a long time) the chance of this 64 bit random number colliding with anyone else is super low. And the penalty for collision is low as well, it just means that anyone trying to decrypt channel messages might need to try multiple candidate channels. Any time a non wire compatible change is made to a channel, this field should be regenerated. There are a small number of 'special' globally known (and fairly) insecure standard channels. Those channels do not have a numeric id included in the settings, but instead it is pulled from a table of well known IDs. (see Well Known Channels FIXME) --->
The name of the channel. If this is left an empty string it is assumed that this channel is the special (minimally secure) "Default" channel. Channel Names should be short (less than 12 bytes).
<!--- A simple pre-shared key for now for crypto. Must be either 0 bytes (no crypto), 16 bytes (AES128), or 32 bytes (AES256). A special shorthand is used for 1 byte long psks. These psks should be treated as only minimally secure, because they are listed in this source code. Those bytes are mapped using the following scheme: 0 = No crypto 1 = The special "default" channel key: {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59, 0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0xbf} 2 through 10 = The default channel key, except with 1 through 9 added to the last byte. Shown to user as simple1 through 10 --->
Selecting a number from the following table will use publicly known encryption keys. They're shipped with Meshtastic source code and thus, anyone can listen to messages encrypted by them. They're great for testing and public channels.
<!--- Use "--setchan psk none" to turn off encryption. Use "--setchan psk random" will assign a new (high quality) random AES256 key to the primary channel (similar to what the Android app does when making new channels). Use "--setchan psk default" to restore the standard 'default' (minimally secure, because it is in the source code for anyone to read) AES128 key. --->
The `region` variable sets which region your radio is configured to work in. It is important to ensure that you've set it to the correct region. If left `Unset`, it will default to `US` settings.
| Name | Center Frequency | Spacing | Number of Channels | Power Limit |
For more details about `region` settings, you can see the source code [here](https://github.com/meshtastic/Meshtastic-device/blob/master/src/mesh/RadioInterface.cpp)
