If your device is connected to Internet via wifi or ethernet, you can enable it to forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on the internet. One or more channels must also be enabled as uplink and/or downlink for packets to be transmitted from and/or to your mesh (See [channels](/docs/configuration/radio/channels#downlink-enabled)). Without these settings enabled, the node will still connect to the MQTT server but only send status messages.
MQTT Server username to use (most useful for a custom MQTT server). If using a custom server, this will be honored even if empty. If using the default public server, this will only be honored if set, otherwise the device will use the default username.
MQTT password to use (most useful for a custom MQTT server). If using a custom server, this will be honored even if empty. If using the default server, this will only be honored if set, otherwise the device will use the default password.
Whether to send encrypted or unencrypted packets to MQTT. This parameter is only honored if you also set server (the default official mqtt.meshtastic.org server can handle encrypted packets). Unencrypted packets may be useful for external systems that want to consume meshtastic packets.
Enable the sending / consumption of JSON packets on MQTT. These packets are not encrypted, but offer an easy way to integrate with systems that can read JSON.
The root topic to use for MQTT messages. This is useful if you want to use a single MQTT server for multiple meshtastic networks and separate them via ACLs.
If true, let the device use the client's (e.g. your phone's) network connection to connect to the MQTT server. If false, it uses the device's network connection which you have to enable via the [network settings](/docs/configuration/radio/network).
### Map Reporting Enabled
Available from firmware version 2.3.2 on.
If true, your node will periodically send an unencrypted map report to the MQTT server to be displayed by online maps that support this packet. This report includes the following information:
- The node's long and short name and ID;
- The node's position (with configurable precision) and altitude;
- The node's hardware model and [role](/docs/configuration/radio/device/#roles);
- The node's firmware version;
- The node's LoRa region, modem preset and primary channel name;
- Whether the node can be reached on the default channel with known key;
- Number of local online nodes (heard in the last 2 hours, excluding those heard via MQTT).
#### Map Report Position Precision
The precision to use for the position in the map report. Defaults to a maximum deviation of around 1459m.
#### Map Report Publish Interval
How often we should publish the map report to the MQTT server in seconds. Defaults to 900 seconds (15 minutes).
Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
The default channel (LongFast) on the public server usually has a lot of traffic. Your device may get overloaded and may no longer function properly anymore. It is recommended to use a different channel or to use your own MQTT server if you experience issues.
*Optional:* To use your phone's internet connection to send and receive packets over the web, also enable the slider for **MQTT Client Proxy** and skip the Configure Network Settings step below.
Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > Channels > LongFast: Turn on the sliders for **Uplink enabled** and **Downlink enabled**, then tap **Save** and tap **Send**.
Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > Network: Turn on the slider for **WiFi enabled**, Enter the **SSID** and **PSK** for your network, then tap **Send**.
*Optional:* To use your phone's internet connection to send and receive packets over the web, also enable the slider for **MQTT Client Proxy** and skip the Configure Network Settings step below.
*Optional:* To use your client's internet connection to send and receive packets over the web, also enable the slider for **Proxy to Client Enabled** and skip the Configure Network Settings step below.
Navigate to Radio Config > Device > Network: Turn on the slider for **Enabled** - Enter your **SSID** and **PSK** for your network - Click the **Save** icon.
