meshtastic/docs/development/firmware/building.mdx

---
id: build
title: Building Meshtastic Firmware
sidebar_label: Building Firmware
---

Meshtastic uses [PlatformIO](https://platformio.org), a development environment that enables easy multi-platform development and centralized tooling.

## Setup the Build Environment

1. [Install PlatformIO](https://platformio.org/platformio-ide)
2. Clone the [Meshtastic Firmware](https://github.com/meshtastic/firmware) repository
   ```shell
   git clone https://github.com/meshtastic/firmware.git
   ```
3. Update the repository's [submodules](https://github.com/meshtastic/firmware/blob/master/.gitmodules)
   ```shell
   cd firmware && git submodule update --init
   ```

## Build

1. Open the newly cloned folder in [Visual Studio Code](https://code.visualstudio.com). If you do this for the first time, this can take quite some while as PlatformIO will download all the necessary tooling and libraries. Also if platformio is not installed, VSCode will ask you to install it, probably requiring a restart of the program.
2. To select the device you you wish to build, open your [command palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette):
   - Windows: `Ctrl + Shift + P`
   - Mac: `command + Shift + P`
3. Enter: `PlatformIO: Pick Project Environment` and select your target.
4. To build the firmware, simply run `PlatformIO: Build` from your command palette.
5. Finally, flash the firmware to your device by running `PlatformIO: Upload`

## Adding Custom Hardware

The build system is modular. Adding a new board variant for an already supported architecture is straightforward.

### Build with Custom Hardware

1. Go to the `variants` folder in the firmware source code and make a new directory for your hardware, let's call it `m5stack_atom` and copy an existing configuration you wanna modify:
   ```shell
   cd variants; mkdir m5stack_atom
   cp heltec_v1/* m5stack_atom
   cd m5stack_atom
   ```
2. Modify the `platformio.ini`_in this subdirectory_ from the canonical define of the hardware variant (`HELTEC_V1` in this case) to `PRIVATE_HW` and make the `-I` on the `build_flags` point to the newly created dir.
   ```shell
   [env:m5stack-atom]
   extends = esp32_base
   board = m5stack-atom
   monitor_filters = esp32_exception_decoder
   build_flags =
      ${esp32_base.build_flags} -D PRIVATE_HW -I variants/m5stack_atom
   lib_deps =
      ${esp32_base.lib_deps}
   ```
3. Edit the `variant.h` file _in this subdirectory_ to reflect the defines and configurations for your board. The example is very well commented.
4. Build, run and debug until you are satisfied with the result.

### Distribute / Publish Custom Builds

1. Perform all of the steps [building with custom hardware](#build-with-custom-hardware) until your hardware runs fine.
2. [Send a proposal](https://github.com/meshtastic/firmware/issues/new?assignees=&labels=enhancement%2Ctriage&template=New+Board.yml&title=%5BBoard%5D%3A+) to add a new board.
3. If approved, go to (https://github.com/meshtastic/protobufs) and send a Pull Request for the `mesh.proto` file, adding your board to the `HardwareModel` Enum.
4. Change your define in `platformio.ini` from `PRIVATE_HW` to `YOUR_BOARD`. Adjust any macro guards in the code you need to support your board.
5. Add your board identifier to `configuration.h` on the firmware repo and send in that Pull Request too.
6. Wait for the Pulls to be merged back into Master.
7. Profit :-)