meshtastic/docs/configuration/module/traceroute.mdx

---
id: traceroute
title: Traceroute Module Usage
sidebar_label: Traceroute
---

import Tabs from "@theme/Tabs";
import TabItem from "@theme/TabItem";

Due to the limited bandwidth of LoRa, Meshtastic does not keep track of the nodes a message used to hop to the destination. However, from firmware 2.0.8 on, there is a Traceroute Module that can show you this.

Only nodes that know the encryption key of the channel you use can be tracked. Also note that a message may arrive via multiple routes due to duplication because of rebroadcasting. This module will only track the hops of the first packet containing the traceroute request that arrived at the destination.

In order to use it, make sure your devices use firmware version 2.0.8 or higher.

<object data="https://www.youtube.com/embed/PKUmaELKaUo?autohide=1&autoplay=0" width="100%" height="400"></object>

## Traceroute Module Client Availability

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'Android', value: 'android'},
{label: 'Apple', value: 'apple'},
{label: 'CLI', value: 'cli'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="android">

#### Android

Make sure the app is at least version 2.1.10.
  
Within the node list, long hold a destination node and select 'Traceroute' to send the request. Depending on the amount of hops that is needed, this might take a while. The result will be shown using a pop-up.

</TabItem>
<TabItem value="apple">

#### Apple

Make sure the app is at least version 2.0.9.

Within the node list, long hold a destination node and select 'Trace Route' to send the request. Depending on the amount of hops that is needed, this might take a while. The result will be shown in the node's Trace route Log.

</TabItem>
<TabItem value="cli">

#### CLI

Make sure the CLI is at least version 2.0.6. Then use this command:

```shell title="CLI traceroute command"
meshtastic --traceroute 'destinationId'
```

Where for `destinationId` you have to fill in the ID of the destination you want to track the hops to, which you can get from running `meshtastic --nodes`. Depending on your OS, you might need quotation marks around the ID. Then it will send a specific message to track the hops. For example, this is what you will get:

```shell title="Traceroute from !25048234 to !bff18ce4"
meshtastic --traceroute '!bff18ce4'
Connected to radio
Sending traceroute request to !bff18ce4 (this could take a while)
Route traced:
!25048234 --> !ba4bf9d0 --> !bff18ce4
```

The first ID shown is the device you are connected to with the CLI. As you can see, this packet went through one other node to get to its destination.

</TabItem>
<TabItem value="web">

#### Web

Not yet implemented.

</TabItem>
</Tabs>