| `CLIENT` | Client (default) - This role will follow the standard routing rules while also allowing the device to interact with client applications via BLE/Wi-Fi (Android/Apple/Web). |
| `CLIENT_MUTE` | Client Mute - Same as a client except packets will not hop over this node, does not contribute to routing packets for mesh. |
| `ROUTER` | Router - Mesh packets will prefer to be routed over this node. The assumption is that Router-type devices will be placed in locations with a height/range/antenna advantage, and therefore have better overall coverage. This node will not be used by client apps. The BLE/Wi-Fi radios and the OLED screen will be put to sleep. Please note: Due to the preferred routing, this role may cause higher power usage due to more frequent transmission. |
| `ROUTER_CLIENT` | Router Client - Hybrid of the Client and Router roles. Similar to Router, except the Router Client can be used as both a Router and an app connected Client. BLE/Wi-Fi and OLED screen will not be put to sleep. |
| `REPEATER`[^1] | Repeater - Mesh packets will prefer to be routed over this node. This role eliminates unnecessary overhead such as NodeInfo, DeviceTelemetry, and any other mesh packet, resulting in the device not appearing as part of the network. As such, direct messaging this node is not available, as it will not appear in your nodes list which results in a cleaner mesh network. Channel and modem settings of the mesh packets being repeated must be identical to the repeater's configuration. Please see Rebroadcast Mode for additional settings specific to this role. |
| `TRACKER` | Tracker - For use with devices intended as a GPS tracker. Position packets sent from this device will be higher priority. Smart Position Broadcast will default to the currently configured settings. |
| `SENSOR` | Sensor - For use with devices intended to primarily collect sensor readings. Telemetry packets sent from this device will be higher priority, broadcasting every five minutes. |
| `ALL` | ALL (Default) - This setting will rebroadcast ALL messages from its primary mesh as well as other meshes with the same modem settings, including when encryption settings differ. |
| `All_SKIP_DECODING` | ALL_SKIP_DECODING - Same as behavior as ALL, but skips packet decoding and simply rebroadcasts them. **Only available with Repeater role.** |
| `LOCAL_ONLY` | LOCAL_ONLY - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. |
This is the number of seconds between NodeInfo message broadcasts from the device. The device will still respond ad-hoc to NodeInfo messages when a response is wanted.
Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
