mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2024-11-09 23:24:10 -08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

added Linux Graphical User Interface instructions

Browse source
This commit is contained in:
Foster Irwin 2021-04-16 16:05:59 -06:00
parent 31d27fbc9f
commit 01a31900e6
1 changed files with 8 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
website/docs/getting_started/flashing_firmware/linux.md
View file

@ -72,3 +72,11 @@ Be very careful to install the correct load for your board. In particular the po
ESPHome Flasher for linux is a prebuilt binary for Ubuntu. These instructions were only testing on Ubuntu. Mileage may very on other distros. ESPHome Flasher also provides instructions to build from source or install via `pip` on their README.
:::
1. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher)
2. Connect your radio to your USB port.
3. Open ESPHome Flasher. There should be no installation required.
4. If your board is not showing under `Serial Port` then you may need to install the drivers for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers).
5. In ESPHome Flasher, refresh the serial ports and select the port to which your board is connected.
6. Browse to the previously downloaded firmware and select the correct firmware based on the board type.
7. Select Flash ESP.
8. Once complete, “Done! Flashing is complete!” will be shown.