From 05ddad3b50a5fe1db91bf9fc025b1ebcd95b32ba Mon Sep 17 00:00:00 2001 From: Tavis Date: Sat, 3 Aug 2024 16:44:54 -1000 Subject: [PATCH] add info for ws85 serial mode --- docs/configuration/module/serial.mdx | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/configuration/module/serial.mdx b/docs/configuration/module/serial.mdx index 3e45da71..b721d373 100644 --- a/docs/configuration/module/serial.mdx +++ b/docs/configuration/module/serial.mdx @@ -38,7 +38,7 @@ Available Values: - `TEXTMSG` will allow you to send a string over the serial port to the device, which will be broadcasted as a text message to the default channel. Any text message received from the mesh will be sent to the serial port as follows: `: `. - `NMEA` will output a NMEA 0183 Data stream containing the internal GPS or fixed position and other node locations as Waypoints (WPL). - `CALTOPO` will output NMEA 0183 Waypoints (WPL) every 10 seconds for all valid node locations, to be consumed by [CalTopo / SARTopo](/docs/software/integrations/caltopo.mdx). - +- `WS85` will parse and compute wind speed data received over serial from the Ecowitt WS85. Transmits valuess via telemetry packet every 5 minutes. Modification of the WS85 weather sensor is required (https://hackaday.io/project/196990-meshtastic-ultrasonic-anemometer-wx-station). If option is not available in app then enable with cli command "meshtastic --set serial.mode 6" ### Receive GPIO Pin Set the GPIO pin to the RXD pin you have set up.