diff --git a/website/docs/getting_started/flashing_firmware/macos.md b/website/docs/getting_started/flashing_firmware/macos.md
new file mode 100644
index 00000000..daa11ef0
--- /dev/null
+++ b/website/docs/getting_started/flashing_firmware/macos.md
@@ -0,0 +1,106 @@
+---
+id: macos
+title: Flashing Firmware – MacOS
+sidebar_label: MacOS
+---
+:::note
+To check if you have a data cable that will work, plug in your device and **then** navigate to `Apple Menu  > About This Mac > System Report... > Hardware > USB`
+you should see something like `CP210X USB to UART Bridge Controller`.
+:::
+
+## Download Firmware
+
+<!--- TODO add buttons to links --->
+Download the [latest](https://github.com/meshtastic/meshtastic-device/releases/latest) firmware release. Unzip the file and locate the correct device and region within the list of prebuilt binaries.
+
+## Command Line Instructions
+
+OS X comes with `Python 2.7` installed, but not `pip`. The following uses Homebrew to install `python3` which includes `pip3`. On MacOS you will use `pip3` instead of `pip`.
+
+:::note
+Check if you have Homebrew installed with the following command
+```bash
+brew -v
+```
+If it's not installed, follow the instructions on the [Homebrew website](https://brew.sh) before continuing.
+:::
+
+1. Install Python3
+```bash
+brew install python3
+```
+2. Confirm `pip3` was installed alongside `python3`
+```bash
+pip3 -v
+```
+3. Install `esptool`
+```bash
+pip3 install --upgrade esptool
+```
+
+:::note
+You may need to install a driver from Silicon Labs for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
+:::
+
+4. Connect your radio to your USB port.
+5. Confirm that your device is talking to your Mac by running the following command in Terminal.
+```bash title="Command"
+esptool.py chip_id
+```
+```bash title="Expected Output"
+# You should see a result similar to this:
+mydir$ esptool.py chip_id
+esptool.py v2.6
+Found 2 serial ports
+Serial port /dev/ttyUSB0
+Connecting....
+Detecting chip type... ESP32
+Chip is ESP32D0WDQ6 (revision 1)
+Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
+MAC: 24:6f:28:b5:36:71
+Uploading stub...
+Running stub...
+Stub running...
+Warning: ESP32 has no Chip ID. Reading MAC instead.
+MAC: 24:6f:28:b5:36:71
+Hard resetting via RTS pin...
+```
+6. `cd` into the directory where you unzipped the latest release. For example:
+```bash title="Example"
+cd /Downloads/firmware/
+```
+7. Install the correct firmware for your board with
+:::caution
+Be very careful to install the correct load for your board. In particular the popular 'T-BEAM' radio from TTGO is not called 'TTGO-Lora' (that is a different board). So don't install the 'TTGO-Lora' build on a TBEAM, it won't work correctly.
+:::
+```bash title="Command"
+device-install.sh -f firmware-BOARD-VERSION.bin
+```
+```bash title="Example"
+./device-install.sh -f firmware-heltec-EU865-1.2.0.bin
+```
+8. To update a the firmware on an existing Meshtastic device, run
+```bash title="Command"
+device-update.sh -f firmware-BOARD-VERSION.bin
+```
+```bash title="Example"
+./device-update.sh -f firmware-heltec-EU865-1.2.0.bin
+```
+
+## Graphical User Interface Instructions
+
+1. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher)
+2. Connect your radio to your USB port.
+3. Open ESPHome Flasher. There should be no installation required.
+:::note
+If you get an error saying `The application "ESPHome-Flasher.app" can't be opened` it is likely a permissions issue. See [here](https://github.com/esphome/esphome-flasher/issues/26#issuecomment-671061140) for instructions.
+:::
+:::note
+If you get an error saying `"ESPHome-Flasher.app" cannot be opened because the developer cannot be verified`, click `cancel`. Right click on the application and select `Open`. Select `Open` on the confirmation alert.
+:::
+
+4. If your board is not showing under `Serial Port` then you may need to install the drivers for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers).
+5. In ESPHome Flasher, refresh the serial ports and select the port to which your board is connected.
+6. Browse to the previously downloaded firmware and select the correct firmware based on the board type.
+7. Select Flash ESP.
+8. Once complete, “Done! Flashing is complete!” will be shown.
diff --git a/website/sidebars.js b/website/sidebars.js
index 0066a513..9fbaa034 100644
--- a/website/sidebars.js
+++ b/website/sidebars.js
@@ -9,6 +9,7 @@ module.exports = {
           "getting_started/flashing_firmware/flashing_firmware_cli",
           "getting_started/flashing_firmware/flashing_firmware_gui",
           "getting_started/flashing_firmware/flashing_firmware_ota",
+          "getting_started/flashing_firmware/macos",
           "getting_started/flashing_firmware/windows",
         ],
         "Howto's": [],