From 4afcb0217a79368b7b96cc130beba136f3b43c82 Mon Sep 17 00:00:00 2001 From: rcarteraz Date: Sat, 14 Sep 2024 09:02:34 -0700 Subject: [PATCH] separate heltec wireless tracker --- .../devices/heltec-automation/index.mdx | 3 +- .../heltec-automation/lora32/index.mdx | 71 ++++++++++++++++++- docs/hardware/devices/index.mdx | 3 +- 3 files changed, 72 insertions(+), 5 deletions(-) diff --git a/docs/hardware/devices/heltec-automation/index.mdx b/docs/hardware/devices/heltec-automation/index.mdx index ebb2c29c..2b96ce11 100644 --- a/docs/hardware/devices/heltec-automation/index.mdx +++ b/docs/hardware/devices/heltec-automation/index.mdx @@ -14,7 +14,8 @@ Inexpensive basic ESP32-based boards. | [LoRa32 V2.1](./lora32/?heltec=v2.1) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | | [LoRa32 V3/3.1](./lora32/?heltec=v23) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO | | [Wireless Stick Lite V3](./lora32/?heltec=Wireless+Stick+Lite+V3) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO | -| [Wireless Tracker](./lora32/?heltec=tracker) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES | +| [Wireless Tracker v1.0](./lora32/?heltec=tracker-v1.0) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES | +| [Wireless Tracker v1.1](./lora32/?heltec=tracker-v1.1) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES | | [Wireless Paper](./lora32/?heltec=paper) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO | ## [Plug & Play Sensors](./sensor/) diff --git a/docs/hardware/devices/heltec-automation/lora32/index.mdx b/docs/hardware/devices/heltec-automation/lora32/index.mdx index 676e1468..8e79f023 100644 --- a/docs/hardware/devices/heltec-automation/lora32/index.mdx +++ b/docs/hardware/devices/heltec-automation/lora32/index.mdx @@ -16,7 +16,8 @@ values={[ {label: 'LoRa32 V2.1', value: 'v2.1'}, {label: 'LoRa32 V3/V3.1', value:'v3'}, {label: 'Wireless Stick Lite V3', value:'Wireless Stick Lite V3'}, -{label: 'Wireless Tracker', value: 'tracker'}, +{label: 'Wireless Tracker v1.0', value: 'tracker-v1.0'}, +{label: 'Wireless Tracker v1.1', value: 'tracker-v1.1'}, {label: 'Wireless Paper v1.0', value: 'paper-v1.0'}, {label: 'Wireless Paper v1.1', value: 'paper-v1.1'} ]}> @@ -165,9 +166,73 @@ Image Source: [Heltec](https://resource.heltec.cn/download/Wireless_Stick_Lite_V - + -## Wireless Tracker +## Wireless Tracker v1.0 + +:::info +This device may have issues charging a connected battery if utilizing a USB-C to USB-C cable. It's recommended to use a USB-A to USB-C cable. +::: + +- **MCU:** + - ESP32-S3FN8 (WiFi & Bluetooth) +- **LoRa Transceiver:** + - Semtech SX1262 +- **Frequency Options:** + - 470 - 510 MHz + - 863 - 870 MHz + - 902 - 928 MHz +- **Connectors:** + - USB-C + - Antenna: + - Dedicated 2.4 GHz metal spring antenna for WiFi/Bluetooth + - U.FL/IPEX antenna connector for LoRa and GNSS + +### Features + +- Onboard 0.96-inch LCD display +- User and Reset Buttons + +### Flashing + +To flash ESP32-S3 devices like the Wireless Tracker, you typically need to place them in Espressif's firmware download mode. Use the "1200bps reset" button in the web flasher to do this. If this method does not work for any reason, you can follow the manual process below. + +:::warning + +Do not proceed unless an antenna is connected to avoid possible damage to the device's radio. + +::: + +The following process will manually place the device into the Espressif Firmware Download mode: + +1. Unplug the device. +2. Press and hold the USER button. +3. Plug device in. +4. After 2-3 seconds, release the USER button. + +With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "Heltec Wireless Tracker" from the device drop-down. + +### Pin Map + +![HT-Tracker_V1 Pin Map](/img/hardware/HT-Tracker_V1_Pin_Map.webp) + +Image Source: [Heltec](https://heltec.org/project/wireless-tracker/) + +### Resources + +- Firmware file: `firmware-heltec-wireless-tracker-V1-0-X.X.X.xxxxxxx.bin` +- Purchase Links: + +:::note + +Heltec revised the Wireless Tracker schematics and released a V1.1, most devices being sold are now [V1.1.](/docs/hardware/devices/heltec-automation/lora32/?heltec=tracker-v1.1#resources-4) + +::: + + + + +## Wireless Tracker v1.1 :::info This device may have issues charging a connected battery if utilizing a USB-C to USB-C cable. It's recommended to use a USB-A to USB-C cable. diff --git a/docs/hardware/devices/index.mdx b/docs/hardware/devices/index.mdx index 4abe0a33..2a6628b7 100644 --- a/docs/hardware/devices/index.mdx +++ b/docs/hardware/devices/index.mdx @@ -126,7 +126,8 @@ Inexpensive basic ESP32-based boards. | [LoRa32 V2.1](./heltec-automation/lora32/?heltec=v2.1) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | | [LoRa32 V3/3.1](./heltec-automation/lora32/?heltec=v23) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO | | [Wireless Stick Lite V3](./heltec-automation/lora32/?heltec=Wireless+Stick+Lite+V3) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO | -| [Wireless Tracker](./heltec-automation/lora32/?heltec=tracker) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES | +| [Wireless Tracker v1.0](./heltec-automation/lora32/?heltec=tracker-v1.0) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES | +| [Wireless Tracker v1.1](./heltec-automation/lora32/?heltec=tracker-v1.1) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES | | [Wireless Paper](./heltec-automation/lora32/?heltec=paper) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO | ### [Plug & Play Sensors](./heltec-automation/sensor/)