diff --git a/docs/getting-started/flashing-firmware/nrf52/index.mdx b/docs/getting-started/flashing-firmware/nrf52/index.mdx
index 837c5095..e9ecd803 100644
--- a/docs/getting-started/flashing-firmware/nrf52/index.mdx
+++ b/docs/getting-started/flashing-firmware/nrf52/index.mdx
@@ -9,4 +9,11 @@ sidebar_position: 2
 
 The nRF52 based devices have the easiest firmware upgrade process. No driver or software install is required on any platform.
 
-1. The [Drag & Drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) firmware installation method is considered the "manual process" and recommended as the easiest solution.
+### Drag & Drop
+nRF52 devices use the [Drag & Drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) installation method to install firmware releases.
+
+### Factory Erase
+You may wish to perform a [Factory Erase](/docs/getting-started/flashing-firmware/nrf52/nrf52-erase) prior to installing firmware to clear data that may change format and location between releases.
+
+### Convert RAK4631-R to RAK4631
+If your device did not come with the Arduino bootloader you will need to [perform the conversion](/docs/getting-started/flashing-firmware/nrf52/convert-rak4631r).
\ No newline at end of file
diff --git a/docs/getting-started/index.mdx b/docs/getting-started/index.mdx
index 1caaa3e3..77e7c7fb 100644
--- a/docs/getting-started/index.mdx
+++ b/docs/getting-started/index.mdx
@@ -59,7 +59,7 @@ Some cables only provide _charging_, verify that your cable is also capable of _
 
 :::caution
 
-With the latest versions of MacOS, USB Serial drivers are built-in. Do _NOT_ download the USB device drivers unless required.  You may [test for installed serial drivers](/docs/getting-started/serial-drivers/test-serial-driver-installation) before continuing.
+nRF52 devices typically do not require serial drivers. They use the UF2 bootloader which makes the devices appear as flash drives.  Do _NOT_ download the USB device drivers unless required to install UF2 support.
 
 :::
 
diff --git a/docs/getting-started/serial-drivers/serial-drivers-nrf52.mdx b/docs/getting-started/serial-drivers/serial-drivers-nrf52.mdx
index 52ec415b..fd85b48a 100644
--- a/docs/getting-started/serial-drivers/serial-drivers-nrf52.mdx
+++ b/docs/getting-started/serial-drivers/serial-drivers-nrf52.mdx
@@ -11,6 +11,12 @@ import Link from "@docusaurus/Link";
 
 ## Install nRF52 USB to Serial Drivers
 
+:::caution
+
+nRF52 devices typically do not require serial drivers. They use the UF2 bootloader which makes the devices appear as flash drives.  Do _NOT_ download the USB device drivers unless required to install UF2 support.
+
+:::
+
 <Tabs
 groupId="operating-system"
 defaultValue="windows"
@@ -22,17 +28,16 @@ values={[
 
 <TabItem value="linux">
 
-- [CH9102 Driver - Linux Download](http://www.wch-ic.com/downloads/CH341SER_LINUX_ZIP.html)
+- [CH34x Driver - Linux Download](http://www.wch-ic.com/downloads/CH341SER_LINUX_ZIP.html)
 
 </TabItem>
 
 <TabItem value="macos">
 
-- [CH9102 Driver - macOS Download](https://github.com/WCHSoftGroup/ch34xser_macos)
 
-:::caution
+:::info
 
-With the latest versions of MacOS, the USB Serial driver is built-in. Do _NOT_ download the USB device drivers unless required. If you downloaded/installed any already, please remove them.
+With the latest versions of MacOS, the USB Serial driver is built-in. If you downloaded/installed any already, please remove them.
 
 :::
 
@@ -47,11 +52,18 @@ Uninstall the kernel extension:
 3. `sudo rm -rf /Library/Extensions/usbserial.kext`
 4. Reboot
 
+
+### Install the CH34x Driver
+
+- [CH34x Driver- macOS Download](https://github.com/WCHSoftGroup/ch34xser_macos)
+
+
+
 </TabItem>
 
 <TabItem value="windows">
 
-- [CH9102 Driver - Windows Download](http://www.wch-ic.com/downloads/CH341SER_EXE.html)
+- [CH34x Driver - Windows Download](http://www.wch-ic.com/downloads/CH341SER_EXE.html)
 
 </TabItem>