diff --git a/docs/configuration/module-config/mqtt.mdx b/docs/configuration/module-config/mqtt.mdx
index 43e51b0d..4cd1de71 100644
--- a/docs/configuration/module-config/mqtt.mdx
+++ b/docs/configuration/module-config/mqtt.mdx
@@ -8,7 +8,7 @@ sidebar_label: MQTT
 import Tabs from '@theme/Tabs';
 import TabItem from '@theme/TabItem';
 
-If your device is connected to WiFi you can enable it to forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on the internet. At least one channel must be enabled as uplink and/or downlink for the MQTT module to work. See [channels](/docs/settings/config/channels#downlink-enabled)
+If your device is connected to Internet via wifi or ethernet you can enable it to forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on the internet. One or more channels must be enabled as uplink and/or downlink for protobuffs to be transmitted from and/or to the mesh See [channels](/docs/settings/config/channels#downlink-enabled). Without these settings the node will still connect to MQTT server and send status messages.
 
 The MQTT module config options are: Enabled, Server Address, Username, Password, Encryption Enabled and JSON Enabled. MQTT Module config uses an admin message sending a `ConfigModule.MQTT` protobuf.