From 1f11331ab999bccc7f8f07c5bd70cedac169f895 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20G=C3=B6ttgens?= Date: Sat, 18 Jan 2025 19:30:56 +0100 Subject: [PATCH] Lilygo rework (#1682) * rework TLora boards, reorder and add deprecation notes * update GPIO section. The pre-allocated Pin 12 is phased out. add T-Lora C6 * add devices to omnibus index * mention epaper --- docs/hardware/devices/index.mdx | 11 +++- docs/hardware/devices/lilygo/index.mdx | 11 +++- docs/hardware/devices/lilygo/lora/gpio.mdx | 2 +- docs/hardware/devices/lilygo/lora/index.mdx | 60 ++++++++++++++++--- .../hardware/devices/lilygo/tlorac6/index.mdx | 27 +++++++++ 5 files changed, 99 insertions(+), 12 deletions(-) create mode 100644 docs/hardware/devices/lilygo/tlorac6/index.mdx diff --git a/docs/hardware/devices/index.mdx b/docs/hardware/devices/index.mdx index 43b4ed2a..a4c33d26 100644 --- a/docs/hardware/devices/index.mdx +++ b/docs/hardware/devices/index.mdx @@ -99,7 +99,8 @@ Inexpensive basic ESP32-based boards. | [LoRa32 V2.0](./lilygo/lora/?t-lora=v2.0) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | | [LoRa32 V2.1-1.6](./lilygo/lora/?t-lora=v2.1) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | | [LoRa32 V2.1-1.8](./lilygo/lora/?t-lora=v2.1-1.8) | ESP32 | SX1280 | 2.4GHz b/g/n | 4.2 | NO | -| [LoRa32 T3-S3 V1.0](./lilygo/lora/?t-lora=S3-v1) | ESP32-S3 | SX1262
SX1276
SX1280 | 2.4GHz b/g/n | 5.0 | NO | +| [LoRa32 V3.0](./lilygo/lora/?t-lora=v3.0) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | +| [LoRa32 T3-S3 V1.0](./lilygo/lora/?t-lora=S3-v1) | ESP32-S3 | SX1262
SX1276
SX1280
LR1121 | 2.4GHz b/g/n | 5.0 | NO | ### [T-Deck](./lilygo/tdeck/) @@ -115,6 +116,14 @@ Standalone device with screen and keyboard | :----------------------------- | :------- | :----- | :--: | :-: | :-: | | [T-Watch S3](./lilygo/twatch/) | ESP32-S3 | SX1262 | YES | 5.0 | NO | +### [T-Lora C6](./lilygo/tlorac6/) + +| Name | MCU | Radio | WiFi | BT | GPS | +| :---------------------- | :------- | :----- | :--: | :-: | :-: | +| [T-Lora C6](./lilygo/tlorac6/) | ESP32-C6 | SX1262 | YES | 5.0* | NO | + +\* Support for Bluetooth in the ESP32-C6 modules is not yet available in the Meshtastic firmware. + ## HELTEC® ### [LoRa 32](./heltec-automation/lora32/) diff --git a/docs/hardware/devices/lilygo/index.mdx b/docs/hardware/devices/lilygo/index.mdx index e2220b35..d753d164 100644 --- a/docs/hardware/devices/lilygo/index.mdx +++ b/docs/hardware/devices/lilygo/index.mdx @@ -36,7 +36,8 @@ Inexpensive basic ESP32-based boards. | [LoRa32 V2.0](./lora/?t-lora=v2.0) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | | [LoRa32 V2.1-1.6](./lora/?t-lora=v2.1) | ESP32 | SX127x | 2.4GHz b/g/n | 4.2 | NO | | [LoRa32 V2.1-1.8](./lora/?t-lora=v2.1-1.8) | ESP32 | SX1280 | 2.4GHz b/g/n | 4.2 | NO | -| [LoRa32 T3-S3 V1.0](./lora/?t-lora=S3-v1) | ESP32-S3 | SX1262
SX1276
SX1280 | 2.4GHz b/g/n | 5.0 | NO | +| [LoRa32 V3.0](./lora/?t-lora=v3.0) | ESP32 | SX127x + TCXO | 2.4GHz b/g/n | 4.2 | NO | +| [LoRa32 T3-S3](./lora/?t-lora=S3-v1) | ESP32-S3 | SX1262
SX1276
SX1280
LR1121 | 2.4GHz b/g/n | 5.0 | NO | ## [T-Deck](./tdeck/) @@ -52,3 +53,11 @@ Standalone device with screen and keyboard. | Name | MCU | Radio | WiFi | BT | GPS | | :---------------------- | :------- | :----- | :--: | :-: | :-: | | [T-Watch S3](./twatch/) | ESP32-S3 | SX1262 | YES | 5.0 | NO | + +## [T-Lora C6](./tlorac6/) + +| Name | MCU | Radio | WiFi | BT | GPS | +| :---------------------- | :------- | :----- | :--: | :-: | :-: | +| [T-Lora C6](./tlorac6/) | ESP32-C6 | SX1262 | YES | 5.0* | NO | + +\* Support for Bluetooth in the ESP32-C6 modules is not yet available in the Meshtastic firmware. \ No newline at end of file diff --git a/docs/hardware/devices/lilygo/lora/gpio.mdx b/docs/hardware/devices/lilygo/lora/gpio.mdx index 773b1cc1..8c2ebc06 100644 --- a/docs/hardware/devices/lilygo/lora/gpio.mdx +++ b/docs/hardware/devices/lilygo/lora/gpio.mdx @@ -7,7 +7,7 @@ sidebar_position: 2 ## GPIO IO12 -For the Lora V2.1-1.6 and V2.1-1.8, Shorting IO12 to ground will progress through the screen pages and/or wake up the device. A simple push switch can be added for this purpose. +For the Lora V2.1-1.8, Shorting IO12 to ground will progress through the screen pages and/or wake up the device. A simple push switch can be added for this purpose. diff --git a/docs/hardware/devices/lilygo/lora/index.mdx b/docs/hardware/devices/lilygo/lora/index.mdx index 487d7c27..3f34d8f2 100644 --- a/docs/hardware/devices/lilygo/lora/index.mdx +++ b/docs/hardware/devices/lilygo/lora/index.mdx @@ -13,14 +13,15 @@ Further information on the LILYGO® LoRa devices can be found on LILYGO®'s [Git @@ -31,7 +32,7 @@ Not recommended with a battery! These boards contain the wrong component in the ::: :::caution -This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora V2.1-1.6 or Lora T3S3 board. +This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora T3S3 board. ::: - **MCU** @@ -71,7 +72,7 @@ Not recommended with a battery! These boards contain the wrong component in the ::: :::caution -This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora V2.1-1.6 or Lora T3S3 board. +This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora T3S3 board. ::: - **MCU** @@ -109,7 +110,7 @@ Not recommended with a battery! These boards contain the wrong component in the ::: :::caution -This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora V2.1-1.6 or Lora T3S3 board. +This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora T3S3 board. ::: - **MCU** @@ -149,6 +150,10 @@ This board is still in production but for various reasons not recommended for ne Early versions of these boards contained the wrong component in the LiPo battery charging circuit allowing the battery to be overcharged. Boards purchased after 2021, unless the version is T3_v1.6 20180606, should not have this issue. ::: +:::caution +This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora T3S3 board. +::: + - **MCU** - ESP32 (WiFi & Bluetooth) - **LoRa Transceiver** @@ -157,6 +162,7 @@ Early versions of these boards contained the wrong component in the LiPo battery - 433 MHz - 868 MHz - 915 MHz + - a variant of this board has a Temperature controlled oscillator (labelled TCXO) for improved frequency stability - **Connectors** - Micro USB - Antenna: SMA antenna connector @@ -193,6 +199,10 @@ Early versions of these boards contained the wrong component in the LiPo battery ## Lora v2.1-1.8 +:::caution +This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora T3S3 board. +::: + - **MCU** - ESP32 (WiFi & Bluetooth) - **LoRa Transceiver** @@ -218,15 +228,47 @@ Early versions of these boards contained the wrong component in the LiPo battery + + +## Lora v3.0 + +:::caution +This board is using a first generation Semtech chip and is therefore not recommended for new purchases. Firmware support is phased out. If in doubt, choose the Lora T3S3 board. +::: + +- **MCU** + - ESP32 (WiFi & Bluetooth) +- **LoRa Transceiver** + - Semtech SX127x with TCXO for improved frequency stability +- **Frequency options** + - 433 MHz + - 868 MHz + - 915 MHz +- **Connectors** + - USB-C + - Antenna: IPEX antenna connector + +### Features + +- Built in 0.96 inch OLED or 2.13 inch E-Paper display +- Power and Reset switches, User Button +- microSD connector +- Solar panel and battery connector, includes solar charging circuit (CN3065) +- QUIIC for UART and I2C each +- No GPS + + + -## Lora T3S3 v1.0 +## Lora T3S3 v1.0, v1.1 and v1.2 - **MCU** - ESP32-S3 (WiFi & Bluetooth) - **LoRa Transceiver** - Semtech SX1262 - Semtech SX1276 + - Semtach LR1121 (Sub-GHz and LORA_24 dual band) - Semtech SX1280 with PA (Region LORA_24 worldwide use) - **Frequency options** - 868 MHz diff --git a/docs/hardware/devices/lilygo/tlorac6/index.mdx b/docs/hardware/devices/lilygo/tlorac6/index.mdx new file mode 100644 index 00000000..3a682245 --- /dev/null +++ b/docs/hardware/devices/lilygo/tlorac6/index.mdx @@ -0,0 +1,27 @@ +--- +id: lora +title: LILYGO® T-Lora C6 +sidebar_label: T-Lora C6 +sidebar_position: 6 +--- + +The T-Lora C6 is a compact, low-cost, and easy-to-use LoRa device. It is based on the ESP32-C6 and SX1262 LoRa transceiver. + +## Specifications + +- **MCU** + - ESP32-C6 (WiFi & Bluetooth 5 LE) +- **LoRa Transceiver** + - Semtech SX1262 +- **Frequency options** + - 915 MHz + - 868 MHz +- **Connectors** + - USB-C + - Antenna: Internal PCB antenna + +## Features + +- User button and Reset switch +- 3D-printed lid +- no GPS