Merge branch 'master' into add_rak_enclosure_harbor_breeze_solar

docs/about/introduction.mdx

@@ -9,7 +9,6 @@ import Link from "@docusaurus/Link";
 
 Meshtastic® is a project that enables you to use inexpensive LoRa radios as a long range off-grid communication platform in areas without existing or reliable communications infrastructure. This project is 100% community driven and open source!
 
-
 ![LoRa Topology](/img/introduction/lora-topology-2.png)
 
 ### Features
@@ -25,11 +24,11 @@ Meshtastic® is a project that enables you to use inexpensive LoRa radios as a l
 
 ## How it works
 
-The underlying technology, LoRa, is a long range radio protocol available to most regions without requiring additional licensing or certification, like HAM operators.
+Meshtastic utilizes LoRa, a long-range radio protocol, which is widely accessible in most regions without the need for additional licenses or certifications, unlike HAM radio operations.
 
-The radios automatically rebroadcast messages they receive in order to create a mesh network so that everyone in the group can receive messages - even from the furthest member. Depending on settings used, the Meshtastic mesh can sustain up to 80 device nodes.
+These radios are designed to rebroadcast messages they receive, forming a mesh network. This setup ensures that every group member, including those at the furthest distance, can receive messages. Depending on the settings employed, the Meshtastic mesh network can support up to 100 devices concurrently.
 
-Meshtastic radios can be paired to a single phone so that your friends and family are able to address a message to your specific radio. Each device supports a connection from a single user at a time.
+Additionally, Meshtastic radios can be paired with a single phone, allowing friends and family to send messages directly to your specific radio. It's important to note that each device is capable of supporting a connection from only one user at a time."
 
 If you are interested in a more technical overview of how Meshtastic works, visit the overview section below:
 

docs/getting-started/flashing-firmware/esp32/cli-script.mdx

@@ -22,7 +22,9 @@ The [T-Beam 0.7](/docs/hardware/devices/tbeam#t-beam---v07) board is an earlier
 :::
 
 ## Command Line Interface Instructions
+
 ### Install Prerequisite Software
+
 <Tabs
 groupId="operating-system"
 defaultValue="linux"
@@ -33,7 +35,6 @@ values={[
 ]}>
 <TabItem value="linux">
 
-
 Check if you have `python3` and `pip` installed with the following command
 
 ```shell
@@ -57,8 +58,6 @@ sudo apt-get install python3-pip
   </TabItem>
   <TabItem value="macos">
 
-
-
 OS X comes with `Python 2.7` installed, but not `pip`. The following uses Homebrew to install `python3` which includes `pip3`. On MacOS you will use `pip3` instead > of `pip`.
 
 :::note
@@ -110,7 +109,6 @@ pip --version
 
 :::
 
-
   </TabItem>
 </Tabs>
 
@@ -120,7 +118,6 @@ pip --version
 pip3 install --upgrade esptool
 ```
 
-
 ### Confirm Communication With Chip
 
 <Tabs
@@ -131,7 +128,13 @@ values={[
 {label: 'macOS', value: 'macos'},
 {label: 'Windows', value: 'windows'},
 ]}>
-<TabItem value="linux"></TabItem>
+<TabItem value="linux">
+
+:::important
+On Linux, you may need to explicitly declare esptool as a .py script. Use `esptool.py chip_id`.
+:::
+
+</TabItem>
 <TabItem value="macos">
 
 :::important
@@ -244,7 +247,6 @@ device-update.bat -f firmware-BOARD-VERSION.bin
   </TabItem>
 </Tabs>
 
-
 ## Connect and Configure Device
 
 After flashing the Meshtastic firmware to the device, you can proceed with the initial configuration.

docs/software/android/usage.mdx

@@ -171,6 +171,8 @@ Radio Configuration opens a list of all radio and module configuration settings.
 
 Allows you to save all your network's position data with GPS coordinates into a .csv (comma separated value) file on your phone. This file can be imported into the spreadsheet application of your choice for easy viewing. This feature is similar but independent from the device [range test module](/docs/configuration/module/range-test), and results may differ.
 
+To reset the values go to the Debug Panel and press the "Clear" button.
+
 ### Theme
 
 [![Meshtastic theme](/img/android/android-settings-theme-c.png)](/img/android/android-settings-theme.png)

vercel.json

@@ -41,11 +41,11 @@
       "destination": "/docs/hardware/devices/rak/core-module#gpio"
     },
     {
-      "source": "/software/android-too-old",
+      "source": "/software/android-too-old(.*)",
       "destination": "/docs/software/android/installation"
     },
     {
-      "source": "/docs/software/android/android-installation",
+      "source": "/docs/software/android/android-installation(.*)",
       "destination": "/docs/software/android/installation"
     },
     {