diff --git a/docs/hardware/devices/tdeck/index.mdx b/docs/hardware/devices/tdeck/index.mdx
index c185281d..0fb5ab28 100644
--- a/docs/hardware/devices/tdeck/index.mdx
+++ b/docs/hardware/devices/tdeck/index.mdx
@@ -29,6 +29,26 @@ The T-Deck is a compact device featuring a 2.8-inch IPS LCD touch screen with a
 - 2.8 inch ST7789 SPI Interface IPS LCD (Resolution: 320 x 240)
 - I2S Speaker/Microphone
 
+## Flashing the T-Deck
+
+If you are having issues flashing the T-Deck, especially if it's your first attempt, you may need to manually place the device into Espressif's Firmware Download mode. Please follow the process below to do so.
+
+:::warning
+
+Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
+
+:::
+
+The following process will manually place the device into the Espressif Firmware Download mode:
+
+1. Ensure the device's power switch is toggled OFF.
+2. Press and hold the TRACKBALL.
+3. Toggle device's power switch ON.
+4. After 2-3 seconds, release the TRACKBALL button.
+5. If the device screen is black and the backlight is off, the device is in the Firmware Download mode. If the backlight is on, repeat these steps.
+
+With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "T Deck" from the device drop-down.
+
 ### Resources
 
 - Firmware file: `firmware-t-deck-X.X.X.xxxxxxx.bin`
diff --git a/docs/hardware/devices/twatch/index.mdx b/docs/hardware/devices/twatch/index.mdx
index ff77a092..39d938a5 100644
--- a/docs/hardware/devices/twatch/index.mdx
+++ b/docs/hardware/devices/twatch/index.mdx
@@ -31,6 +31,29 @@ The T-Watch S3 is a compact wearable device featuring a 1.54-inch IPS LCD touch
 - BMA423 Three Axis accelerometer
 - Real-Time Clock
 
+## Flashing the T-Watch S3
+
+If you are having issues flashing the T-Watch S3, especially if it's your first attempt, you may need to manually place the device into Espressif's Firmware Download mode. Please follow the process below to do so.
+
+:::warning
+
+Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
+
+:::
+
+The following process will manually place the device into the Espressif Firmware Download mode:
+
+1. Ensure the device is powered off by pressing and holding the crown button.
+2. Remove the device's back cover.
+3. Locate and press and hold the boot button.
+
+![T Watch S3 Boot Button](/img/hardware/T-Watch-S3-BUTTON.jpg)
+
+4. While holding the boot button, press the crown button once to turn the device on.
+5. After 2-3 seconds, release the BOOT button.
+
+With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "T Watch S3" from the device drop-down.
+
 ### Resources
 
 - Firmware file: `firmware-t-watch-X.X.X.xxxxxxx.bin`
diff --git a/static/img/hardware/T-Watch-S3-BUTTON.jpg b/static/img/hardware/T-Watch-S3-BUTTON.jpg
new file mode 100644
index 00000000..5ba09175
Binary files /dev/null and b/static/img/hardware/T-Watch-S3-BUTTON.jpg differ