mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2025-01-14 07:20:44 -08:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

Update gpio-peripherals.mdx

Browse source 
Clarified the build instructions.  The LED polarity wasn't specified.
This commit is contained in:
pdxlocations 2023-06-02 05:22:14 -07:00 committed by GitHub
parent 7fb6db6fb2
commit 2d7561e7c8
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
docs/configuration/gpio-peripherals.mdx
View file

@ -59,7 +59,7 @@ The procedure using the python command line tool is:
meshtastic --seturl theurlyoucopiedinstep3
```
Now both devices should be able to talk over the `gpio` channel. Send a text message from one to the other to verify. Also run `--nodes` to verify the second node shows up.
Now both devices should be able to talk over the `gpio` channel. Send a text message from one the other other verify. Also run `--nodes` to verify the second node shows up.
### Masks
@ -132,9 +132,9 @@ You can add a simple LED and resistor to validate that the GPIO operations work
### Preparation
1. Disconnect the remote device from power (battery/usb)
2. Add a resistor from yellow wire to the one end of the LED (either end of the resistor is OK, either end of the LED is OK)
3. Add the yellow wire from a GPIO pin that will not cause any issues (ex: for TLoraV1, we can use GPIO21)
4. Add the black "ground" wire from the ground pin on the device (ex: for TLoraV1 it is the end pin next to the RST button) to the other end of the LED
2. Connect the resistor to the longer (positive) lead of the LED and the yellow wire to the other end of the resistor
3. Connect the other end of the yellow wire to a GPIO pin that will not cause any issues (ex: for TLoraV1, we can use GPIO21)
4. Connect the black "ground" wire from the ground pin on the device (ex: for TLoraV1 it is the end pin next to the RST button) to the shorter (negative) lead of the LED
5. Power on the device
### Validation