Merge pull request #253 from jfirwin/move-settings

move settings folder

docs/developers/device/mesh-alg.md

@@ -94,7 +94,7 @@ Given our use-case for the initial release, most of our protocol is built around
 If any mesh nodes see a packet with a HopLimit other than zero, it will decrement that HopLimit and attempt retransmission on behalf of the original sending node.
 
 :::note
-A node being in router mode does **not** currently change this behavior, but is intended to be used for future versions of the meshing algorithm. For an explanation of what router mode currently does, see [settings](/docs/software/settings/router#enabledisable-router-mode).
+A node being in router mode does **not** currently change this behavior, but is intended to be used for future versions of the meshing algorithm. For an explanation of what router mode currently does, see [settings](/docs/settings/router#enabledisable-router-mode).
 :::
 
 ### Layer 4: DSR for Multi-Hop Unicast Messaging

docs/settings/overview.md

@@ -15,7 +15,7 @@ Below are some of the most common settings that a new user will want to become a
 
 ### Channel Settings
 
-Channel settings are very important, if channels are misconfigured between devices they won't be able to communicate! A freshly flashed device will use the default channel settings. Depending on your use case you may want to change your encryption using `psk`, your range of communication by setting one of the four pre-set bands using `modem_config`, or even just the name of your channel! Before you begin, don't forget to set your `region` correctly! Take a look at the [basic channel configuration](software/settings/channel) and if you're tech savvy or a radio head check out the [advanced channel settings](software/settings/channel-advanced).
+Channel settings are very important, if channels are misconfigured between devices they won't be able to communicate! A freshly flashed device will use the default channel settings. Depending on your use case you may want to change your encryption using `psk`, your range of communication by setting one of the four pre-set bands using `modem_config`, or even just the name of your channel! Before you begin, don't forget to set your `region` correctly! Take a look at the [basic channel configuration](settings/channel) and if you're tech savvy or a radio head check out the [advanced channel settings](settings/channel-advanced).
 
 :::note
 It is very important that you set your device's `region` setting. This will ensure that you are operating within the legal limits for your area.
@@ -23,11 +23,11 @@ It is very important that you set your device's `region` setting. This will ensu
 
 ### GPS Settings
 
-For most, GPS is a really cool, desirable feature. Knowing where everyone on your local mesh is has some major advantages. However, it's possible you want to hide the location of a particular device (like a router mounted on your home). All of the settings related to GPS are located [here](software/settings/gps).
+For most, GPS is a really cool, desirable feature. Knowing where everyone on your local mesh is has some major advantages. However, it's possible you want to hide the location of a particular device (like a router mounted on your home). All of the settings related to GPS are located [here](settings/gps).
 
 ### WiFi Settings
 
-Whether you're using the upcoming [web interface](software/web/web-app-software) or you're interested in broadcasting messages to/from the internet using [MQTT](software/settings/mqtt), the [WiFi settings](software/settings/wifi) are your first stop towards an IoT radio.
+Whether you're using the upcoming [web interface](software/web/web-app-software) or you're interested in broadcasting messages to/from the internet using [MQTT](settings/mqtt), the [WiFi settings](settings/wifi) are your first stop towards an IoT radio.
 
 ## Examples
 

sidebars.js

@@ -97,7 +97,7 @@ module.exports = {
     ],
     "Additional Documentation": [
       {type: "ref", id: "getting-started/overview"},
-      {type: "ref", id: "software/settings/overview"},
+      {type: "ref", id: "settings/overview"},
       {type: "ref", id: "hardware/overview"},
       {type: "ref", id: "developers/overview"},
       {type: "ref", id: "about-documentation/overview"},
@@ -128,27 +128,27 @@ module.exports = {
     ],
 
     "Device Settings": [
-      "software/settings/overview",
-      "software/settings/channel",
-      "software/settings/gps",
-      "software/settings/ham",
-      "software/settings/mqtt",
-      "software/settings/power",
-      "software/settings/router",
-      "software/settings/wifi",
+      "settings/overview",
+      "settings/channel",
+      "settings/gps",
+      "settings/ham",
+      "settings/mqtt",
+      "settings/power",
+      "settings/router",
+      "settings/wifi",
       {
         Plugins: [
-          "software/settings/canned-message-plugin",
-          "software/settings/environmental-measurement-plugin",
-          "software/settings/external-notification-plugin",
-          "software/settings/range-test-plugin",
-          "software/settings/rotary-encoder-plugin",
-          "software/settings/serial-plugin",
-          "software/settings/store-and-forward-plugin",
+          "settings/canned-message-plugin",
+          "settings/environmental-measurement-plugin",
+          "settings/external-notification-plugin",
+          "settings/range-test-plugin",
+          "settings/rotary-encoder-plugin",
+          "settings/serial-plugin",
+          "settings/store-and-forward-plugin",
         ],
         Advanced: [
-          "software/settings/channel-advanced",
-          "software/settings/misc",
+          "settings/channel-advanced",
+          "settings/misc",
         ],
       },
     ],
@@ -187,7 +187,7 @@ module.exports = {
     ],
     "Additional Documentation": [
       {type: "ref", id: "getting-started/overview"},
-      {type: "ref", id: "software/settings/overview"},
+      {type: "ref", id: "settings/overview"},
       {type: "ref", id: "software/overview"},
       {type: "ref", id: "developers/overview"},
       {type: "ref", id: "about-documentation/overview"},
@@ -244,7 +244,7 @@ module.exports = {
     ],
     "Additional Documentation": [
       {type: "ref", id: "getting-started/overview"},
-      {type: "ref", id: "software/settings/overview"},
+      {type: "ref", id: "settings/overview"},
       {type: "ref", id: "hardware/overview"},
       {type: "ref", id: "software/overview"},
       {type: "ref", id: "legal/overview"},
@@ -259,7 +259,7 @@ module.exports = {
     ],
     "Additional Documentation": [
       {type: "ref", id: "getting-started/overview"},
-      {type: "ref", id: "software/settings/overview"},
+      {type: "ref", id: "settings/overview"},
       {type: "ref", id: "hardware/overview"},
       {type: "ref", id: "software/overview"},
       {type: "ref", id: "developers/overview"},