Merge pull request #326 from apt105/small-fixes

Update hardware pages and fix headings in downloads page

docs/hardware/supported/rak4631.mdx

@@ -338,4 +338,13 @@ Further information on the RAK1906 can be found on the [RAK Documentation Center
 ## RAK Wireless' Resources
 
 - RAK's Wisblock [Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock)
-- RAK's [GitHub Page](https://github.com/RAKWireless/WisBlock) for the WisBlock
+- RAK's [GitHub Page](https://github.com/RAKWireless/WisBlock) for the WisBlock
+
+## MAC Address Conflict
+
+Some of the RAK Meshtastic starter kits that come pre-installed with Meshtastic have an error where the same MAC address is applied to more than one unit. If you have a number of RAK devices but are unable to connect to more than one of them, or they will not talk to each other despite being on the same mesh, please try a [factory reset](/docs/settings/misc#factory_reset) using the Meshtastic CLI, and then restart the device. This reset will wipe all settings on the device back to their defaults including the stored MAC address. If you have already configured your node and wish to keep the configuration, then please export it first:
+
+- `meshtastic --export-config > settings_file.txt` - This will save the node's settings to the file `settings_file.txt`
+- `meshtastic --set factory_reset true` - This will reset the device and wipe the configuration
+- Power cycle the device
+- `meshtastic --configure settings_files.txt` - This will restore the settings saved in the file `settings_file.txt`

docs/hardware/supported/tbeam.mdx

@@ -125,3 +125,7 @@ This is an earlier version of the T-Beam board, and due to changes in the design
 
 
 [<img alt="0.96 inch OLED display" src="/img/hardware/screen.png" style={{zoom:'25%'}} />](/img/hardware/screen.png)
+
+To attach the screen, connect VCC to 3v3, GND to GND, SCL to pin 22, and SDA to pin 21 as per the below image.
+
+[<img alt="Connecting the OLED screen to a T-Beam" src="/img/hardware/t-beam-screen.jpg" style={{zoom:'50%'}} />](/img/hardware/t-beam-screen.jpg)

docs/hardware/supported/techo.mdx

@@ -29,3 +29,18 @@ The T-Echo is the latest device to be release by LILYGO® supporting a low power
   src="/img/hardware/t-echo.png"
   style={{ zoom: '15%' }}
 />
+
+### T-Echo button functions
+
+- Capacitive top button
+  - A short press refreshes the current screen
+- Button 1
+  - A single press resets the device
+  - A double press puts the device into bootloader mode ready to receive a new firmware
+- Button 2
+  - A single press changes the page displayed on the device
+  - A double press turns the screen backlight on/off
+  - A long press turns the device off
+
+
+[<img alt="LILYGO T-Echo" src="/img/hardware/t-echo-lilygo.jpg" style={{zoom:'25%'}} />](/img/hardware/t-echo-lilygo.jpg)

src/css/custom.css

@@ -164,4 +164,32 @@ a + .navbar__link > svg {
 .markdown :where(ul ul,ul ol,ol ul,ol ol):not(:where([class~=not-prose] *)){
   margin-bottom:0;
   margin-top: 0;
-}
+}
+
+h1, h2, h3, h4, h5, h6 {
+  font-weight: var(--ifm-heading-font-weight)
+  }
+  
+  h1 {
+  font-size: var(--ifm-h1-font-size)
+  }
+  
+  h2 {
+  font-size: var(--ifm-h2-font-size)
+  }
+  
+  h3 {
+  font-size: var(--ifm-h3-font-size)
+  }
+  
+  h4 {
+  font-size: var(--ifm-h4-font-size)
+  }
+  
+  h5 {
+  font-size: var(--ifm-h5-font-size)
+  }
+  
+  h6 {
+  font-size: var(--ifm-h6-font-size)
+  }