diff --git a/docs/hardware/devices/lora/index.mdx b/docs/hardware/devices/lora/index.mdx
index 88783299..4c0c89c1 100644
--- a/docs/hardware/devices/lora/index.mdx
+++ b/docs/hardware/devices/lora/index.mdx
@@ -217,6 +217,30 @@ Early versions of some of these boards contained the wrong component in the LiPo
 - microSD connector
 - No GPS
 
+## Flashing the T3S3
+
+:::warning
+
+Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
+
+:::
+
+The following process will manually place the device into the Espressif Firmware Download mode:
+
+1. Switch off the device.
+2. Connect the USB-C data cable to the device. A blue LED will illuminate while display stays black.
+3. Press and hold the BOOT button to the right of the display.
+4. Switch the device on.
+5. After 2-3 seconds, release the BOOT button.
+
+With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "Tlora T3s3 V1" from the device drop-down.
+
+:::note
+
+If after successfully flashing the device and the screen remains black, you may need to use the [CLI Script](https://meshtastic.org/docs/getting-started/flashing-firmware/esp32/cli-script) to flash Meshtastic.
+
+:::
+
 ## Resources
 
 - Firmware file: `firmware-tlora-t3s3-v1.xxxxxxx.bin`
diff --git a/docs/hardware/devices/rak/screens.mdx b/docs/hardware/devices/rak/screens.mdx
index 9d5ad5a0..c655cdcc 100644
--- a/docs/hardware/devices/rak/screens.mdx
+++ b/docs/hardware/devices/rak/screens.mdx
@@ -43,6 +43,7 @@ The [RAK1400 EPD module](https://store.rakwireless.com/products/wisblock-epd-mod
 - Resolution 212 x 104 pixels
 - Occupies the IO Port of a Wisblock Base
 
+- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/rak-wireless-wisblock-epd-module-rak14000-pid-110024)
 - Firmware for 5005 with RAK14000 e-paper: [`firmware-rak4631_eink-X.X.X.xxxxxxx.uf2`](/downloads)
 
   <img
diff --git a/docs/hardware/devices/tbeam/index.mdx b/docs/hardware/devices/tbeam/index.mdx
index 34ca8a73..68790e7d 100644
--- a/docs/hardware/devices/tbeam/index.mdx
+++ b/docs/hardware/devices/tbeam/index.mdx
@@ -89,7 +89,7 @@ This is an earlier version of the T-Beam board. Due to changes in the design thi
 
 - Firmware file: `firmware-tbeam-X.X.X.xxxxxxx.bin`
 - Purchase link: [AliExpress](https://www.aliexpress.com/item/4001178678568.html)
-- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/lilygo-ttgo-t-beam-v1-1-lora-esp32-development-board-wifi-bluetooth-module-gps-neo-6m-sx1276-915mhz-q219?ref=8Bb2mUO5i-jKwt)
+- US Distributor - Purchase link: Rokland [No OLED](https://store.rokland.com/products/lilygo-ttgo-t-beam-v1-1-lora-esp32-development-board-wifi-bluetooth-module-gps-neo-6m-sx1276-915mhz-q219?ref=8Bb2mUO5i-jKwt), [OLED](https://store.rokland.com/products/lilygo-ttgo-meshtastic-t-beam-v1-1-esp32-lora-915-mhz-wireless-module-wifi-gps-neo-6m-with-oled-display-soldered-for-arduino-q349)
 
 ![TTGO T-Beam v1.1](/img/hardware/t-beam-v1.1.png)
 ![TTGO T-Beam v1.1 pinmap](/img/hardware/t-beam_v1.1_pinmap.webp)
@@ -232,6 +232,8 @@ This is an earlier version of the T-Beam board. Due to changes in the design thi
 
   - Firmware file: `firmware-tbeam-s3-core-X.X.X.xxxxxxx.bin`
   - Purchase Link: [AliExpress](https://www.aliexpress.com/item/1005005418286231.html)
+  - US Distributor - Purchase link: Rokland [NEO-M10S](https://store.rokland.com/products/lilygo-t-beam-supreme-esp32-s3-lora-development-board-sx1262-915mhz-gps-l76k-or-u-blox?variant=41051191378003), [Quectel L76K](https://store.rokland.com/products/lilygo-t-beam-supreme-esp32-s3-lora-development-board-sx1262-915mhz-gps-l76k-or-u-blox?variant=41051191345235)
+
 
 ![T-Beam Supreme](/img/hardware/T-BEAM-S3-Supreme.jpg)
 
diff --git a/docs/software/mqtt/adafruit-io.mdx b/docs/software/mqtt/adafruit-io.mdx
new file mode 100644
index 00000000..641158a2
--- /dev/null
+++ b/docs/software/mqtt/adafruit-io.mdx
@@ -0,0 +1,174 @@
+---
+id: adafruit-io
+title: Adafruit IO
+sidebar_label: Adafruit IO
+sidebar_position: 5
+---
+
+### Adafruit IO for Meshtastic 
+
+Adafruit IO can be used to graph telemetry and messages from a Meshtastic network via json/mqtt.  The following example script will listen for node packets and publish voltage, rssi, snr and messages to individual feeds on adafruit IO.  If a feed doesn't exist it will be created.  Be aware, however, that the free Adafruit account is limited to 10 feeds.  Once your feeds are being populated with data you can create dashboards to display graphs and gauges with the data.
+
+:::info
+
+To utilize this script you need to have an Adafruit IO account, a working mqtt broker setup and a mesh node that is publishing to the mqtt broker. 
+
+:::
+
+You will need to modify the script with your Adafruit IO and mqtt credentials and mqtt publisher node id
+
+```python
+# Persistent mqtt client, watch for voltage, teleme, message packets and publish them to io
+# feeds will be created.  free tier maxes out at 10
+
+# Import Adafruit IO REST client.
+from Adafruit_IO import Client, Feed, Data, RequestError
+from datetime import datetime
+import paho.mqtt.client as mqtt
+import os
+import sys
+import json
+import time
+import random
+
+import pytz
+# set your timezone here
+timezone = pytz.timezone("US/Hawaii")
+
+# set your Adafruit IO creds here
+AIO_USER = "tavdog"
+AIO_KEY = "XXXXXXXXXXXXX"
+
+# set your MQTT broker information
+MQTT_SERVER = "XXXXXXXXXX"
+MQTT_PORT = 1883 # default
+MQTT_TOPIC_PREFIX = "mesh" # specified when you setup your node to publish mqtt
+MQTT_USERNAME = "xxxxxxxxx"
+MQTT_PASSWORD = "xxxxxxxxx"
+
+# your node ID that is publishingn to the MQTT broker
+MQTT_NODE_ID = "!387e0248"
+# your channel (node must be set to json output)
+MQTT_CHANNEL = "LongFast"
+
+print("\n\n")
+client_id = str(random.randint(0, 100))
+mqttClient = mqtt.Client("python_mesh_client_%s" % client_id) # this needs to be kind of unique. mqtt broker will not allow duplicate connections.
+mqttClient.username_pw_set(MQTT_USERNAME, MQTT_PASSWORD)
+mqttClient.connect(MQTT_SERVER, MQTT_PORT)
+mqttClient.loop_start()
+print("Subscribing to %s/2/json/%s/%s" % (MQTT_TOPIC_PREFIX, MQTT_CHANNEL,MQTT_NODE_ID))
+mqttClient.subscribe("%s/2/json/%s/%s" % (MQTT_TOPIC_PREFIX, MQTT_CHANNEL,MQTT_NODE_ID))
+time.sleep(1)
+
+# you can add more channels here
+#mqttClient.subscribe("%s/2/json/MauiMesh/%s" % (MQTT_TOPIC_PREFIX, MQTT_NODE_ID))
+
+
+aio = Client(AIO_USER, AIO_KEY)
+
+node_db = dict()
+# bootstrap your node_db here if you want. otherwise it will populate eventually but die on restart.
+# node_db = { 634792740: 'Tavis Blue', 
+#             947782216: 'G1 Wailuku', 
+#             1839130823: 'Giggle Hill', 
+#             2330585902: 'Ayla Kekona', 
+#             634717328: 'Nani Hoku', 
+#             3667835576: 'Rachael'}
+
+def get_feed(full_name,kind):
+    name = full_name.split('-')[0]
+    try:
+        feed = aio.feeds(f"mesh.{name.lower()}-{kind}")
+    except:
+        print("creating feed:" + kind)
+        # Create Feed 
+        new_feed = Feed(name=f"{name}_{kind}")
+        feed = aio.create_feed(feed=new_feed,group_key="mesh")
+        
+    return feed
+
+def publish_rssi(data,metadata):
+    name = node_db[data['from']]
+    feed = get_feed(name,"rssi") # use a function here because we will create the feed if it doens't exist already.
+    print(feed.key + " \t\t: " + str(data['rssi']))
+    aio.send_data(feed.key, data['rssi'],metadata)
+
+def publish_snr(data,metadata):
+    name = node_db[data['from']]
+    feed = get_feed(name,"snr") # use a function here because we will create the feed if it doens't exist already.
+    print(feed.key + " \t\t: " + str(data['snr']))
+    aio.send_data(feed.key, data['snr'],metadata)
+
+def publish_voltage(data,metadata):
+    name = node_db[data['from']]
+    feed = get_feed(name,"voltage") # use a function here because we will create the feed if it doens't exist already.    print(feed.key + " \t: " + str(data['payload'].get('voltage',"none")))
+    print(feed.key + " \t: " + str(data['payload']['voltage']))
+    aio.send_data(feed.key, data['payload'].get('voltage',0),metadata)
+
+def publish_packet(data):
+
+    feed = aio.feeds("mesh.messages")
+    if (data['from'] in node_db):
+        data['fname'] = node_db[data['from']]
+    # trim down the data. we really only want to see the message content
+    trimmed = { 
+        'from' : data.get('fname',None) or data.get('from'),
+        'message' : data['payload']['text'],
+        'stamp' : datetime.fromtimestamp(data['timestamp'],timezone).strftime('%Y-%m-%d %H:%M:%S'),
+        }
+    aio.send_data(feed.key, json.dumps(trimmed, indent=4))
+
+
+def on_message(client, userdata, message):
+    print("\n")
+    print("message received " ,str(message.payload.decode("utf-8")))
+    print("\n")
+    data = json.loads(str(message.payload.decode("utf-8")))
+    
+    # check the topic of the message
+    if data['type'] == "text":
+        # publish all message packets to the packet log
+        publish_packet(data)
+    
+    # update node_db if needed
+    if data['type'] == 'nodeinfo':
+        # add to the node_db if we haven't seen it before
+        if data['from'] not in node_db:
+            node_db[data['from']] = data['payload']['shortname'] + '-' + data['payload']['longname']
+            print(str(node_db))
+            return # don't publish data from nodedb packets.
+
+    # "payload":{"altitude":113,"latitude_i":208759687,"longitude_i":-1565037665
+    metadata = None        
+    if data['type'] == 'position':
+        metadata = {
+            'lat': data['payload']['latitude_i'] / 10000000, #40.726190,
+            'lon': data['payload']['longitude_i'] / 10000000, #-74.005334,
+            'ele': data['payload'].get('altitude',None),
+            'created_at': datetime.now(timezone),
+        }
+        # add to the node_db if we know who they are already
+
+
+    if data['from'] in node_db:
+        try:
+            if 'rssi' in data and data['rssi'] != 0:
+                # do the doings
+                publish_rssi( data, metadata )
+            if 'snr' in data and data['snr'] != 0:
+                publish_snr( data, metadata )
+            if 'payload' in data and data['payload'].get('voltage',0) != 0:
+                publish_voltage( data, metadata )
+        except Exception as e:
+            print("Error sending to IO:", str(e))
+
+
+mqttClient.on_message = on_message
+
+# loop forever
+while(True):
+    pass
+
+```
+
diff --git a/docs/software/mqtt/index.mdx b/docs/software/mqtt/index.mdx
index 2150ca5d..8242a0f5 100644
--- a/docs/software/mqtt/index.mdx
+++ b/docs/software/mqtt/index.mdx
@@ -142,3 +142,5 @@ An existing public [MQTT broker](https://mosquitto.org) will be the default for
 - [Using MQTT with Node-RED](/docs/software/mqtt/nodered.mdx)
 
 - [Using MQTT with Home Assistant](/docs/software/mqtt/home-assistant.mdx)
+
+- [Using MQTT with Adafruit IO](/docs/software/mqtt/adafruit-io.mdx)
\ No newline at end of file