From 7f4acf7bdb64ab3003f671ad4f575bbae77229ec Mon Sep 17 00:00:00 2001 From: Walter Schnell Date: Sun, 5 Nov 2023 14:41:02 +0100 Subject: [PATCH] Update /docs/hardware/devices/lora/index.mdx Flashing the T3S3 is new and different. --- docs/hardware/devices/lora/index.mdx | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/docs/hardware/devices/lora/index.mdx b/docs/hardware/devices/lora/index.mdx index 88783299..31576af1 100644 --- a/docs/hardware/devices/lora/index.mdx +++ b/docs/hardware/devices/lora/index.mdx @@ -217,6 +217,18 @@ Early versions of some of these boards contained the wrong component in the LiPo - microSD connector - No GPS +## Flashing the T3S3 + +with antenna connected + +- switch off the node +- connect the USB-C data cable => a blue LED goes on, display is black +- press the BOOT button - to the right of the display +- switch node on +- release BOOT button + +this will put the node in flash mode. Now try flashing with the [Web Flasher](https://flasher.meshtastic.org/) with device "Tlora T3s3 V1"; if it finally says "Next" and the display stays dark with only the blue LED on, use the [CLI](https://meshtastic.org/docs/getting-started/flashing-firmware/esp32/cli-script) to flash Meshtasic to the node. + ## Resources - Firmware file: `firmware-tlora-t3s3-v1.xxxxxxx.bin`