From 8535548f5877ed31d6584c46346349a8ca73e720 Mon Sep 17 00:00:00 2001
From: apt105 <73254487+apt105@users.noreply.github.com>
Date: Sat, 15 May 2021 19:40:24 +0100
Subject: [PATCH] Update installation.md

---
 website/docs/software/python/installation.md | 150 +++++++++----------
 1 file changed, 74 insertions(+), 76 deletions(-)

diff --git a/website/docs/software/python/installation.md b/website/docs/software/python/installation.md
index dc489f43..b58cfe71 100644
--- a/website/docs/software/python/installation.md
+++ b/website/docs/software/python/installation.md
@@ -22,99 +22,97 @@ Installation is easily done through the [Python package installer pip](https://p
   ]}>
   <TabItem value="linux">
 
-- Check that your computer has the required serial drivers installed
-    * Connect your Meshtastic device to your USB port
-    * Use the command
+    - Check that your computer has the required serial drivers installed
+        * Connect your Meshtastic device to your USB port
+        * Use the command
+            ```bash
+            lsusb
+            ```
+        * You should see something like `CP210X USB to UART Bridge Controller`
+        * If not download the drivers from [Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).
+    - Check that your computer has Python 3 installed.
+        * Use the command
+            ```bash
+            python3 -V
+            ```
+        * If this does not return a version, install [python](https://www.python.org)
+    - Pip is typically installed if you are using python 3 version >= 3.4
+        * Check that pip is installed using this command
+            ```bash
+            pip3 -V
+            ```
+        * If this does not return a version, install [pip](https://pip.pypa.io/en/stable/installing/)
+    - Install pytap2
         ```bash
-        lsusb
+        sudo pip3 install --upgrade pytap2
         ```
-    * You should see something like `CP210X USB to UART Bridge Controller`
-    * If not download the drivers from [Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).
-- Check that your computer has Python 3 installed.
-    * Use the command
+    - Install meshtastic:
         ```bash
-        python3 -V
+        sudo pip3 install --upgrade meshtastic
         ```
-    * If this does not return a version, install [python](https://www.python.org)
-- Pip is typically installed if you are using python 3 version >= 3.4
-    * Check that pip is installed using this command
-        ```bash
-        pip3 -V
-        ```
-    * If this does not return a version, install [pip](https://pip.pypa.io/en/stable/installing/)
-- Install pytap2
-    ```bash
-    sudo pip3 install --upgrade pytap2
-    ```
-- Install meshtastic:
-    ```bash
-    sudo pip3 install --upgrade meshtastic
-    ```
   </TabItem>
   <TabItem value="macos">
-- Check that your computer has the required serial drivers installed
-    * Connect your Meshtastic device to your USB port
-    * Navigate to `Apple Menu  > About This Mac > System Report... > Hardware > USB`
-    * You should see something like `CP210X USB to UART Bridge Controller`
-    * If not download the drivers from [Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).
-- Check that your computer has Python 3 installed.
-    * Use the command
-        ```bash
-        python3 -V
-        ```
-    * If this does not return a version, install [python](https://www.python.org)
-        * The following uses Homebrew to install `python3` which includes `pip3`.
-        * Check if you have Homebrew installed with the following command
+    - Check that your computer has the required serial drivers installed
+        * Connect your Meshtastic device to your USB port
+        * Navigate to `Apple Menu  > About This Mac > System Report... > Hardware > USB`
+        * You should see something like `CP210X USB to UART Bridge Controller`
+        * If not download the drivers from [Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).
+    - Check that your computer has Python 3 installed.
+        * Use the command
             ```bash
-            brew -v
+            python3 -V
             ```
-            If it's not installed, follow the instructions on the [Homebrew website](https://brew.sh) before continuing.
-        * Install Python3
+        * If this does not return a version, install [python](https://www.python.org)
+            * The following uses Homebrew to install `python3` which includes `pip3`.
+            * Check if you have Homebrew installed with the following command
+                ```bash
+                brew -v
+                ```
+                If it's not installed, follow the instructions on the [Homebrew website](https://brew.sh) before continuing.
+            * Install Python3
+                ```bash
+                brew install python3
+                ```
+    - Pip is typically installed if you are using python 3 version >= 3.4
+        * Check that pip is installed using this command
             ```bash
-            brew install python3
+            pip3 -V
             ```
-- Pip is typically installed if you are using python 3 version >= 3.4
-    * Check that pip is installed using this command
+        * If this does not return a version, install [pip](https://pip.pypa.io/en/stable/installing/)
+    - Install pytap2
         ```bash
-        pip3 -V
+        sudo pip3 install --upgrade pytap2
+        ```
+    - Install meshtastic:
+        ```bash
+        sudo pip3 install --upgrade meshtastic
         ```
-    * If this does not return a version, install [pip](https://pip.pypa.io/en/stable/installing/)
-- Install pytap2
-    ```bash
-    sudo pip3 install --upgrade pytap2
-    ```
-- Install meshtastic:
-    ```bash
-    sudo pip3 install --upgrade meshtastic
-    ```
   </TabItem>
   <TabItem value="windows">
-## Windows
-
-- Check that your computer has the required serial drivers installed
-    * Connect your Meshtastic device to your USB port
-    * Open Device Manager
-    * Under `Ports (COM & LPT)` you should see something like `Silicon Labs CP210X USB to UART Bridge (COM5)`
-    * If not download the drivers from [Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).
-- Check that your computer has Python 3 installed.
-    * Use the command
+    - Check that your computer has the required serial drivers installed
+        * Connect your Meshtastic device to your USB port
+        * Open Device Manager
+        * Under `Ports (COM & LPT)` you should see something like `Silicon Labs CP210X USB to UART Bridge (COM5)`
+        * If not download the drivers from [Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).
+    - Check that your computer has Python 3 installed.
+        * Use the command
+            ```powershell
+            py -V
+            ```
+        * If this does not return a version, install [python](https://www.python.org)
+    - Pip is typically installed if you are using python 3 version >= 3.4
+        * Check that pip is installed using this command
+            ```powershell
+            pip3 -V
+            ```
+        * If this does not return a version, install [pip](https://pip.pypa.io/en/stable/installing/)
+    - Install pytap2
         ```powershell
-        py -V
+        pip3 install --upgrade pytap2
         ```
-    * If this does not return a version, install [python](https://www.python.org)
-- Pip is typically installed if you are using python 3 version >= 3.4
-    * Check that pip is installed using this command
+    - Install meshtastic:
         ```powershell
-        pip3 -V
+        pip3 install --upgrade meshtastic
         ```
-    * If this does not return a version, install [pip](https://pip.pypa.io/en/stable/installing/)
-- Install pytap2
-    ```powershell
-    pip3 install --upgrade pytap2
-    ```
-- Install meshtastic:
-    ```powershell
-    pip3 install --upgrade meshtastic
-    ```
   </TabItem>
 </Tabs>
\ No newline at end of file