From 87e7725ddcb257d9ef187fec9019116178b48f8f Mon Sep 17 00:00:00 2001 From: Foster Irwin Date: Thu, 12 May 2022 20:28:35 -0600 Subject: [PATCH] swap list for table --- docs/_blocks/_module_overview_text.mdx | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/docs/_blocks/_module_overview_text.mdx b/docs/_blocks/_module_overview_text.mdx index 27400b3b..4f21841f 100644 --- a/docs/_blocks/_module_overview_text.mdx +++ b/docs/_blocks/_module_overview_text.mdx @@ -2,13 +2,15 @@ Modules are included in the firmware and allow users to extend the functionality The list of current modules is as follows: -- Canned Message Module -- External Notification Module -- Input Broker Module -- Range Test Module -- Serial Module -- Store and Forward Module -- Telemetry Module +| Name | Description | +|:----:|:-----------:| +| Canned Message Module | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. | +| External Notification Module | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) | +| Input Broker Module | Attach and define input devices such as external keyboards and rotary encoders. | +| Range Test Module | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver will log all incoming messages to a CSV. | +| Serial Module | Send messages across the mesh by sending strings over a serial port. | +| Store and Forward Module | Set a designated node to store messages and resend them to nodes with intermittent connection to a mesh. | +| Telemetry Module | Attach sensors to the device and transmit readings on a regular interval to the mesh. | :::tip Once module settings are changed, a **reset** is required for them to take effect.