mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2024-12-30 07:59:54 -08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge pull request #1046 from GUVWAF/nRF52JSON

Browse source 
Add notes that JSON is not supported on the nRF52 platform
This commit is contained in:
rcarteraz 2024-02-25 09:28:40 -07:00 committed by GitHub
parent e323b4ff4f 583afe2a97
commit 8c63f11d21
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
4 changed files with 14 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
docs/configuration/module/mqtt.mdx
View file

@ -38,6 +38,10 @@ Whether to send encrypted or unencrypted packets to MQTT. This parameter is only
### JSON Enabled
:::note
JSON is not supported on the nRF52 platform.
:::
Enable the sending / consumption of JSON packets on MQTT. These packets are not encrypted, but offer an easy way to integrate with systems that can read JSON.
### TLS Enabled

2
docs/configuration/radio/network.mdx
View file

@ -167,7 +167,7 @@ All Network config options are available in the Web UI.
### WiFi Client
With `network.wifi_ssid` & `network.wifi_psk` populated, the device will know to connect to your network. Make sure you are in range of your WiFi. If you have a single Meshtastic device on your local network it's easy to connect to your device with DNS `http://meshtastic.local`. If you have multiple Meshtastic devices you will need to connect using their respective IP addresses.
With `network.wifi_ssid` & `network.wifi_psk` populated, the device will know to connect to your network. Make sure you are in range of your WiFi and it is a 2.4GHz-only network. If you have a single Meshtastic device on your local network it's easy to connect to your device with DNS `http://meshtastic.local`. If you have multiple Meshtastic devices you will need to connect using their respective IP addresses.
### Disable WiFi

6
docs/software/integrations/mqtt/index.mdx
View file

@ -54,6 +54,10 @@ The payload is a raw protobuf, whose definitions for Meshtastic can be found [he
If [encryption_enabled](/docs/configuration/module/mqtt#encryption-enabled) is set to true, the payload of the MeshPacket will remain encrypted with the key for the specified channel.
#### JSON topic
:::note
JSON is not supported on the nRF52 platform.
:::
If [JSON is enabled](/docs/configuration/module/mqtt#json-enabled), packets from the following [port numbers](/docs/development/firmware/portnum) are serialized to JSON: `TEXT_MESSAGE_APP`, `TELEMETRY_APP`, `NODEINFO_APP`, `POSITION_APP`, `WAYPOINT_APP`, `NEIGHBORINFO_APP`, `TRACEROUTE_APP`, `DETECTION_SENSOR_APP`, `PAXCOUNTER_APP` and `REMOTE_HARDWARE_APP`. These are then forwarded to the topic:
`msh/2/json/CHANNELNAME/USERID`.
@ -123,7 +127,7 @@ For the type `sendtext`, the `payload` should be a string containing the text to
Check out [MQTT Settings](/docs/configuration/module/mqtt) for full information. For quick start instructions, read on.
- Connect your gateway node to wifi, by setting the `network.wifi_ssid`, `network.wifi_psk` and `network.wifi_enabled` preferences.
- Alternatively use the RAK4631 with Ethernet Module RAK13800, by setting `network.eth_mode` and `network.eth_enabled`.
- Alternatively use the RAK4631 with Ethernet Module RAK13800, by setting `network.eth_mode` and `network.eth_enabled` (note that JSON is not supported on the nRF52 platform).
- Configure your broker settings: `mqtt.address`, `mqtt.username`, and `mqtt.password`. If all are left blank, the device will connect to the Meshtastic broker.
- Set `uplink_enabled` and `downlink_enabled` as appropriate for each channel. Most users will just have a single channel (at channel index 0). `meshtastic --ch-index 0 --ch-set uplink_enabled true`

4
docs/software/integrations/mqtt/nodered.mdx
View file

@ -54,6 +54,10 @@ The JSON output only publishes the following subset of the messages on a Meshtas
> Protobufs are mesh native.
#### 1. Using JSON-encoded messages
:::note
JSON is not supported on the nRF52 platform.
:::
Make sure that option *JSON Output Enabled* is set in MQTT module options and you have a channel called "mqtt".
Below is a valid JSON envelope for information sent by MQTT to a device for broadcast onto the mesh. The `to` field is optional and can be omitted for broadcast. The `channel` field is also optional and can be omitted to send to the primary channel.