mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-25 05:34:11 -08:00
Created Windows firmware flashing page
This commit is contained in:
Foster Irwin
parent
fe2e4af5cc
commit
91b3629df2
86
website/docs/getting_started/flashing_firmware/windows.md
Normal file
86
website/docs/getting_started/flashing_firmware/windows.md
Normal file
|
|
@ -0,0 +1,86 @@
|
|||
---
|
||||
id: windows
|
||||
title: Flashing Firmware – Windows
|
||||
sidebar_label: Windows
|
||||
---
|
||||
:::note
|
||||
To check if you have a data cable that will work, plug in your device and navigate to `Device Manager > Ports` and ensure the device is shown. You should see something like `CP210X USB to UART Bridge Controller`.
|
||||
|
||||
If your device is showing up under `Device Manager > Ports > Other Devices` you need to install the driver from Silicon Labs for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
|
||||
:::
|
||||
## Download Firmware
|
||||
|
||||
<!--- TODO add buttons to links --->
|
||||
Download the [latest](https://github.com/meshtastic/meshtastic-device/releases/latest) firmware release. Unzip the file and locate the correct device and region within the list of prebuilt binaries.
|
||||
|
||||
## Command Line Instructions
|
||||
|
||||
1. Download and install [Python](https://www.python.org/). Make sure to click `Add Python X.Y to PATH`.
|
||||
2. Download and install [Gitbash](https://gitforwindows.org/) (or other appropriate shell) and run all subsequent commands from that shell.
|
||||
3. Confirm installation of `python` & `pip` with the following commands.
|
||||
```bash
|
||||
py --version
|
||||
```
|
||||
```bash
|
||||
pip --version
|
||||
```
|
||||
<!--- Check on `gitbash` requirements --->
|
||||
4. Install `esptool`
|
||||
```bash
|
||||
pip install --upgrade esptool
|
||||
```
|
||||
5. Connect your radio to your USB port.
|
||||
6. Confirm that your device is talking to your Mac by running the following command in Terminal.
|
||||
```bash title="Command"
|
||||
esptool.py chip_id
|
||||
```
|
||||
```bash title="Expected Output"
|
||||
# You should see a result similar to this:
|
||||
mydir$ esptool.py chip_id
|
||||
esptool.py v2.6
|
||||
Found 2 serial ports
|
||||
Serial port /dev/ttyUSB0
|
||||
Connecting....
|
||||
Detecting chip type... ESP32
|
||||
Chip is ESP32D0WDQ6 (revision 1)
|
||||
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
|
||||
MAC: 24:6f:28:b5:36:71
|
||||
Uploading stub...
|
||||
Running stub...
|
||||
Stub running...
|
||||
Warning: ESP32 has no Chip ID. Reading MAC instead.
|
||||
MAC: 24:6f:28:b5:36:71
|
||||
Hard resetting via RTS pin...
|
||||
```
|
||||
7. `cd` into the directory where you unzipped the latest release. For example:
|
||||
```bash title="Example"
|
||||
cd /Downloads/firmware/
|
||||
```
|
||||
8. Install the correct firmware for your board with
|
||||
:::caution
|
||||
Be very careful to install the correct load for your board. In particular the popular 'T-BEAM' radio from TTGO is not called 'TTGO-Lora' (that is a different board). So don't install the 'TTGO-Lora' build on a TBEAM, it won't work correctly.
|
||||
:::
|
||||
```bash title="Command"
|
||||
device-install.sh -f firmware-BOARD-VERSION.bin
|
||||
```
|
||||
```bash title="Example"
|
||||
./device-install.sh -f firmware-heltec-EU865-1.2.0.bin
|
||||
```
|
||||
9. To update a the firmware on an existing Meshtastic device, run
|
||||
```bash title="Command"
|
||||
device-update.sh -f firmware-BOARD-VERSION.bin
|
||||
```
|
||||
```bash title="Example"
|
||||
./device-update.sh -f firmware-heltec-EU865-1.2.0.bin
|
||||
```
|
||||
|
||||
## Graphical User Interface Instructions
|
||||
|
||||
1. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher)
|
||||
2. Connect your radio to your USB port.
|
||||
3. Open ESPHome Flasher. There should be no installation required.
|
||||
4. If your board is not showing under `Serial Port` then you may need to install the drivers for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers).
|
||||
5. In ESPHome Flasher, refresh the serial ports and select the port to which your board is connected.
|
||||
6. Browse to the previously downloaded firmware and select the correct firmware based on the board type.
|
||||
7. Select Flash ESP.
|
||||
8. Once complete, “Done! Flashing is complete!” will be shown.
|
||||
|
|
@ -9,6 +9,7 @@ module.exports = {
|
|||
"getting_started/flashing_firmware/flashing_firmware_cli",
|
||||
"getting_started/flashing_firmware/flashing_firmware_gui",
|
||||
"getting_started/flashing_firmware/flashing_firmware_ota",
|
||||
"getting_started/flashing_firmware/windows",
|
||||
],
|
||||
"Howto's": [],
|
||||
},
|
||||
|
|
|
|||
Loading…
Reference in a new issue