diff --git a/docs/getting-started/flashing-firmware.md b/docs/getting-started/flashing-firmware.md
index b33bc4bb..b926ccf9 100644
--- a/docs/getting-started/flashing-firmware.md
+++ b/docs/getting-started/flashing-firmware.md
@@ -27,7 +27,7 @@ If you know you have installed the correct driver, the following step can be use
 
 You can verify that you have a proper data cable (rather than a charge-only type cable) and that the appropriate drivers for your system are installed by performing the following test. Select your operating system below.
 
-If you can see your device, you are ready to flash the firmware. Skip to the[Choose Firmware Flashing Method section](#choose-firmware-flashing-method).
+If you can see your device, you are ready to flash the firmware. Skip to the [Choose Firmware Flashing Method section](#choose-firmware-flashing-method).
 
 If you don't see your device in the following test, you either:
 
@@ -137,9 +137,9 @@ With the latest versions of MacOS, the USB Serial driver is built-in. Do _NOT_ d
         If you have already downloaded/installed the MacOS WCH-IC CH340 ("CH341SER_MAC") drivers via the CH34x_Install_V1.5.pkg, you will have to Uninstall the kernel extension:
         <br />
         <br />
-        1. Unplug your T-Echo<br />
+        1. Unplug your device<br />
         2. Open the Terminal and run:<br />
-        3. sudo -rf /Library/Extensions/usbserial.kext<br />
+        3. sudo rm -rf /Library/Extensions/usbserial.kext<br />
         4. Reboot
     </div>
   </div>