mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2025-03-05 21:00:08 -08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Remove espHome instuctions, fix ordered list.

Browse source
This commit is contained in:
Sacha Weatherstone 2021-12-07 22:41:29 +11:00
parent c7cad7143d
commit 9dc234b9ed
2 changed files with 4 additions and 64 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

60
website/docs/getting-started/flashing-esp32.md
View file

@ -258,66 +258,6 @@ Be very careful to install the correct load for your board. In particular the po
</TabItem> </TabItem>
</Tabs> </Tabs>
## Graphical User Interface Instructions
### Download `ESPHome Flasher`
:::note
ESPHome Flasher also provides instructions to build from source or install via `pip` on their [README](https://github.com/esphome/esphome-flasher/).
:::
<Tabs
groupId="operating-system"
defaultValue="linux"
values={[
{label: 'Linux', value: 'linux'},
{label: 'macOS', value: 'macos'},
{label: 'Windows', value: 'windows'},
]}>
<TabItem value="linux">
| [ESPHome Flasher](https://github.com/esphome/esphome-flasher/releases/latest) |
| :-----------------------------------------------------------: |
### Open ESPHome Flasher
> There should be no installation required. Connect your device using a data USB cable and refresh the `Serial Port`. Select the port that your device is connected to.
:::note
ESPHome Flasher for linux is a prebuilt binary for Ubuntu. These instructions were only tested on Ubuntu. Mileage may very on other distros.
:::
</TabItem>
<TabItem value="macos">
### Open ESPHome Flasher
> There should be no installation required. Connect your device using a data USB cable and refresh the `Serial Port`. Select the port that your device is connected to.
:::note
If you get an error saying `The application "ESPHome-Flasher.app" can't be opened` it is likely a permissions issue. See [here](https://github.com/esphome/esphome-flasher/issues/26#issuecomment-671061140) for instructions.
:::
:::note
>If you get an error saying `"ESPHome-Flasher.app" cannot be opened because the developer cannot be verified`, click `cancel`. Right click on the application and select `Open`. Select `Open` on the confirmation alert.
:::
</TabItem>
<TabItem value="windows">
| [ESPHome Flasher](https://github.com/esphome/esphome-flasher/releases/latest) |
| :-----------------------------------------------------------: |
### Open ESPHome Flasher
> There should be no installation required. Connect your device using a data USB cable and refresh the `Serial Port`. Select the port that your device is connected to.
</TabItem>
</Tabs>
### Select Firmware ### Select Firmware
Browse to the previously downloaded firmware and select the correct firmware based on the board type and frequency. Browse to the previously downloaded firmware and select the correct firmware based on the board type and frequency.

8
website/docs/getting-started/flashing-nrf52.md
View file

@ -42,10 +42,10 @@ With the latest versions of MacOS, the USB Serial driver is built-in. Do *NOT* d
If you have already downloaded/installed the MacOS WCH-IC CH340 ("CH341SER_MAC") drivers via the `CH34x_Install_V1.5.pkg`, you will have to Uninstall the kernel extension: If you have already downloaded/installed the MacOS WCH-IC CH340 ("CH341SER_MAC") drivers via the `CH34x_Install_V1.5.pkg`, you will have to Uninstall the kernel extension:
<br /> <br />
<br /> <br />
1.) Unplug your T-Echo<br /> 1. Unplug your T-Echo<br />
2.) Open the Terminal and run:<br /> 2. Open the Terminal and run:<br />
3.) sudo -rf /Library/Extensions/usbserial.kext`<br /> 3. sudo -rf /Library/Extensions/usbserial.kext`<br />
4.) Reboot 4. Reboot
</div> </div>
</div> </div>
</details> </details>