add command chaining tip to each config, fix frmat

docs/configuration/module-config/audio.mdx

@@ -65,7 +65,6 @@ values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
 {label: 'CLI', value: 'cli'},
-{label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
 <TabItem value="android">
@@ -89,8 +88,12 @@ Audio module config is not available on iOS, iPadOS and macOS.
 </TabItem>
 <TabItem value="cli">
 
+:::info 
+
 All audio module config options are available in the python CLI. Example commands are below:
 
+:::
+
 |        Setting        |  Acceptable Values  | Default |
 | :-------------------: | :-----------------: | :-----: |
 | audio.enabled |   `true`, `false`   | `false` |
@@ -101,6 +104,15 @@ All audio module config options are available in the python CLI. Example command
 | audio.i2s_din |  GPIO Pin Number 1-34   | no Default   |
 | audio.i2s_sck |  GPIO Pin Number 1-34   | no Default  |
 
+:::tip
+
+Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
+
+```shell title="Example:"
+meshtastic --set audio.enabled true --set audio.bitrate CODEC2_1400
+```
+
+:::
 
 ```shell title="Enable / Disable Module"
 meshtastic --set audio.enabled true
@@ -125,14 +137,7 @@ meshtastic --set audio.bitrate CODEC2_1400
 ```
 
 </TabItem>
-<TabItem value="flasher">
+<TabItem value="web">
-
-:::info
-No audio module config options are available in the Flasher.
-:::
-
-  </TabItem>
-  <TabItem value="web">
 
 :::info
 All audio module config options are available in the Web UI.
@@ -142,7 +147,9 @@ All audio module config options are available in the Web UI.
 </Tabs>
 
 :::warning
+
 GPIO access is fundamentally dangerous because invalid options can physically damage or destroy your hardware. Ensure that you fully understand the schematic for your particular device before trying this as we do not offer a warranty. Use at your own risk.
 
 This module requires attaching a peripheral accessory to your device. It will not work without one.
+
 :::

docs/configuration/module-config/canned-message.mdx

@@ -81,7 +81,6 @@ values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
 {label: 'CLI', value: 'cli'},
-{label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
 <TabItem value="android">
@@ -106,7 +105,9 @@ All canned message module config options are available on iOS, iPadOS and macOS
 <TabItem value="cli">
 
 :::info
+
 All canned message module config options are available in the python CLI. 
+
 :::
 
 Example commands are below:
@@ -125,6 +126,16 @@ Example commands are below:
 |    canned_message.inputbroker_pin_b      |     `integer`     | (not defined) |
 |  canned_message.inputbroker_pin_press    |     `integer`     | (not defined) |
 
+:::tip
+
+Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
+
+```shell title="Example:"
+meshtastic --set canned_message.enabled true --set canned_message.send_bell true
+```
+
+:::
+
 ```shell title="Enable/Disable the Canned Message Module"
 meshtastic --set canned_message.enabled true
 meshtastic --set canned_message.enabled false
@@ -178,14 +189,7 @@ meshtastic --set canned_message.inputbroker_event_press KEY_SELECT
 meshtastic --set canned_message.inputbroker_event_press ""
 ```
 </TabItem>
-<TabItem value="flasher">
+<TabItem value="web">
-
-:::info
-No canned message test module config options are available in the Flasher.
-:::
-
-  </TabItem>
-  <TabItem value="web">
 
 :::info
 All canned message module config options are available in the Web UI.

docs/configuration/module-config/external-notification.mdx

@@ -51,7 +51,6 @@ values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
 {label: 'CLI', value: 'cli'},
-{label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
 <TabItem value="android">
@@ -75,8 +74,12 @@ All external notification module config options are available on iOS, iPadOS and
 </TabItem>
 <TabItem value="cli">
 
+:::info
+
 All external notification module config options are available in the python CLI. Example commands are below:
 
+:::
+
 |         Setting                |    Acceptable Values     | Default |
 | :----------------------------: | :----------------------: | :-----: |
 |    external_notification.enabled    |     `true`, `false`      | `false` |
@@ -86,6 +89,16 @@ All external notification module config options are available in the python CLI.
 |    external_notification.output     |        `integer`         |   `0`   |
 |   external_notification.output_ms   | `integer` (milliseconds) |   `0`   |
 
+:::tip
+
+Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
+
+```shell title="Example:"
+meshtastic --set external_notification.enabled true --set external_notification.alert_bell true
+```
+
+:::
+
 ```shell title="Enable/Disable External Notification Module"
 meshtastic --set external_notification.enabled true
 meshtastic --set external_notification.enabled false
@@ -115,20 +128,13 @@ meshtastic --set external_notification.output_ms 0
 meshtastic --set external_notification.output_ms 1500
 ```
 </TabItem>
-<TabItem value="flasher">
+<TabItem value="web">
-
-:::info
-External Notification module config is not available in the Flasher.
-:::
-
-  </TabItem>
-  <TabItem value="web">
 
 :::info
 All External Notification module config is available for the Web UI.
 :::
     
-  </TabItem>
+</TabItem>
 </Tabs>
 
 :::warning

docs/configuration/module-config/mqtt.mdx

@@ -49,7 +49,6 @@ values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
 {label: 'CLI', value: 'cli'},
-{label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
 <TabItem value="android">
@@ -73,8 +72,12 @@ MQTT module config is not available for Apple.
 </TabItem>
 <TabItem value="cli">
 
+:::info
+
 All MQTT module config options are available in the python CLI. Example commands are below:
 
+:::
+
 |     Setting                  |    Acceptable Values     | Default |
 | :--------------------------: | :----------------------: | :-----: |
 |    mqtt.enabled              |     `true`, `false`      | `false` |
@@ -84,9 +87,24 @@ All MQTT module config options are available in the python CLI. Example commands
 |    mqtt.encryption_enabled   |     `string`             |         |
 |    mqtt.json_enabled         |     `true`, `false`      | `false` |
 
+:::tip
+
+Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
+
+```shell title="Example:"
+meshtastic --set mqtt.enabled true --set mqtt.json_enabled true
+```
+
+:::
+
 ```shell title="Enable/Disable MQTT Module"
 meshtastic --set mqtt.enabled true
 meshtastic --set mqtt.enabled false
+```
+
+```shell title="Enable/Disable MQTT JSON"
+meshtastic --set mqtt.json_enabled true
+meshtastic --set mqtt.json_enabled false
 ```
 
   </TabItem>

docs/configuration/module-config/range-test.mdx

@@ -37,7 +37,6 @@ values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
 {label: 'CLI', value: 'cli'},
-{label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
 <TabItem value="android">
@@ -61,14 +60,28 @@ All range test module config options are available on iOS, iPadOS and macOS at S
 </TabItem>
 <TabItem value="cli">
 
+:::info
+
 Range Test module config options are available in the python CLI. Example commands are below:
 
+:::
+
 |          Setting          |  Acceptable Values  | Default |
 | :-----------------------: | :-----------------: | :-----: |
 | range_test.enabled |   `true`, `false`   | `false` |
 |  range_test.save   |   `true`, `false`   | `false` |
 | range_test.sender  | `integer` (Seconds) |   `0`   |
 
+:::tip
+
+Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
+
+```shell title="Example:"
+meshtastic --set range_test.enabled true --set range_test.save false
+```
+
+:::
+
 ```shell title="Enable / Disable the range test"
 meshtastic --set range_test.enabled true
 meshtastic --set range_test.enabled false
@@ -88,20 +101,15 @@ meshtastic --set range_test.sender 0
 ```
 
 </TabItem>
-<TabItem value="flasher">
+<TabItem value="web">
 
 :::info
-No range test module config options are available in the Flasher.
-:::
 
-  </TabItem>
-  <TabItem value="web">
-
-:::info
 No range test module config options are available in the Web UI.
+
 :::
 
-  </TabItem>
+</TabItem>
 </Tabs>
 
 ## Examples

docs/configuration/module-config/serial.mdx

@@ -70,7 +70,6 @@ values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
 {label: 'CLI', value: 'cli'},
-{label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
 <TabItem value="android">
@@ -94,8 +93,12 @@ All serial module config options are available on iOS, iPadOS and macOS at Setti
 </TabItem>
 <TabItem value="cli">
 
+:::info 
+
 All serial module config options are available in the python CLI. Example commands are below:
 
+:::
+
 |        Setting        |  Acceptable Values  | Default |
 | :-------------------: | :-----------------: | :-----: |
 | serial.enabled |   `true`, `false`   | `false` |
@@ -106,6 +109,15 @@ All serial module config options are available in the python CLI. Example comman
 | serial.baud    | `BAUD_DEFAULT` `BAUD_110` `BAUD_300` `BAUD_600` `BAUD_1200` `BAUD_2400` `BAUD_4800` `BAUD_9600` `BAUD_19200` `BAUD_38400` `BAUD_57600` `BAUD_115200` `BAUD_230400` `BAUD_460800` `BAUD_576000` `BAUD_921600` |  `BAUD_DEFAULT`  |
 | serial.timeout | `integer` (seconds) |   `0`   |
 
+:::tip
+
+Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
+
+```shell title="Example:"
+meshtastic --set serial.enabled true --set serial.echo true
+```
+
+:::
 
 ```shell title="Enable / Disable Module"
 meshtastic --set serial.enabled true
@@ -140,20 +152,13 @@ meshtastic --set serial.timeout 15
 ```
 
 </TabItem>
-<TabItem value="flasher">
+<TabItem value="web">
-
-:::info
-No serial module config options are available in the Flasher.
-:::
-
-  </TabItem>
-  <TabItem value="web">
 
 :::info
 All serial module config options are available in the Web UI.
 :::
     
-  </TabItem>
+</TabItem>
 </Tabs>
 
 :::warning

docs/configuration/module-config/telemetry.mdx

@@ -151,7 +151,7 @@ All telemetry module config options are available in the Web UI.
 
 :::
     
-  </TabItem>
+</TabItem>
 </Tabs>
 
 ## Examples