diff --git a/docs/configuration/device-config/lora.mdx b/docs/configuration/device-config/lora.mdx
index ecf78e54..7b6ed2ea 100644
--- a/docs/configuration/device-config/lora.mdx
+++ b/docs/configuration/device-config/lora.mdx
@@ -36,7 +36,7 @@ The presets are designed to provide further options for optimizing either speed
 1. A high number of devices exist in the mesh, or messages are sent very frequently. Faster speeds (and therefore lower radio time per device) can help with mesh network congestion.
 2. Maximum range is desired, for long range scenarios where a several second delay in message receipt is acceptable (for instance, attempting to send messages from a town to a distant mountain top).
 
-The Presets available as as follows, and follow a linear pattern of Fastest <--> Slowest, and Shortest <--> Longest range:
+The Presets available are as follows, and follow a linear pattern of Fastest <--> Slowest, and Shortest <--> Longest range:
 
 1. `SHORT_FAST` (Fastest, highest bandwidth, lowest airtime, shortest range)
 
@@ -48,8 +48,11 @@ The Presets available as as follows, and follow a linear pattern of Fastest <-->
 
 5. `LONG_FAST` (Default)
 
-6. `LONG_SLOW`
-7. `VERY_LONG_SLOW` (Slowest, lowest bandwidth, highest airtime, longest range)
+6. `LONG_MODERATE`
+
+7. `LONG_SLOW`
+
+8. `VERY_LONG_SLOW` (Slowest, lowest bandwidth, highest airtime, longest range)
 
 ### Max Hops
 
diff --git a/docs/configuration/device-config/power.mdx b/docs/configuration/device-config/power.mdx
index 4f5158b1..ecd33888 100644
--- a/docs/configuration/device-config/power.mdx
+++ b/docs/configuration/device-config/power.mdx
@@ -16,7 +16,7 @@ Power settings are advanced configuration, most users should choose a role under
 
 ### Power Saving
 
-If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in we should try to minimize power consumption as much as possible.
+If set, Bluetooth, Wifi, and screen (if applicable) are turned off. When using the Router device role, this setting is on by default. The assumption for a Router is that the device will be used in a standalone manner where these features are not needed, and will be shut off to conserve power. This is especially useful when a device is powered from a low-current source (i.e. solar).
 
 ### Shutdown after losing power
 
diff --git a/docs/hardware/devices/tbeam/index.mdx b/docs/hardware/devices/tbeam/index.mdx
index 9fc53bc1..0b8d93d0 100644
--- a/docs/hardware/devices/tbeam/index.mdx
+++ b/docs/hardware/devices/tbeam/index.mdx
@@ -85,6 +85,7 @@ This is an earlier version of the T-Beam board. Due to changes in the design thi
 
 - Firmware file: `firmware-tbeam-X.X.X.xxxxxxx.bin`
 - Purchase link: [AliExpress](https://www.aliexpress.com/item/4001178678568.html)
+- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/lilygo-ttgo-t-beam-v1-1-lora-esp32-development-board-wifi-bluetooth-module-gps-neo-6m-sx1276-915mhz-q219?ref=8Bb2mUO5i-jKwt)
 
 ![TTGO T-Beam v1.1](/img/hardware/t-beam-v1.1.png)
 ![TTGO T-Beam v1.1 pinmap](/img/hardware/t-beam_v1.1_pinmap.webp)
@@ -118,6 +119,7 @@ This is an earlier version of the T-Beam board. Due to changes in the design thi
 
 - Firmware file: `firmware-tbeam-X.X.X.xxxxxxx.bin`
 - Purchase link: [AliExpress](https://www.aliexpress.com/item/33047631119.html)
+- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/lilygo-ttgo-t-beam-v1-1-ipex-esp32-lora-915mhz-wifi-wireless-bluetooth-module-gps-neo-m8n-ipex-18650-battery-holder-q107?ref=8Bb2mUO5i-jKwt)
 
 ![TTGO T-Beam M8N](/img/hardware/t-beam-m8n.png)
 
@@ -149,6 +151,7 @@ This is an earlier version of the T-Beam board. Due to changes in the design thi
 
 - Firmware file: `firmware-tbeam-X.X.X.xxxxxxx.bin`
 - Purchase link: [AliExpress](https://www.aliexpress.com/item/4001287221970.html)
+- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/lilygo-t-beam-v1-1-neo-m8n-gnss-ipex-lora-sx1262-915mhz-wireless-module-wifi-bluetooth-board-q215?ref=8Bb2mUO5i-jKwt)
 
 ![T-Beam M8N & SX1262](/img/hardware/t-beam-sx1262.png)