mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2024-12-26 06:04:22 -08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Updated verbiage

Browse source
This commit is contained in:
rcarteraz 2023-11-08 11:13:01 -07:00
parent 66f43c0c37
commit b6a4a3ea8d
1 changed files with 19 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
docs/hardware/devices/lora/index.mdx
View file

@ -219,15 +219,27 @@ Early versions of some of these boards contained the wrong component in the LiPo
## Flashing the T3S3
with antenna connected
:::warning
- switch off the node
- connect the USB-C data cable => a blue LED goes on, display is black
- press the BOOT button - to the right of the display
- switch node on
- release BOOT button
Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
this will put the node in flash mode. Now try flashing with the [Web Flasher](https://flasher.meshtastic.org/) with device "Tlora T3s3 V1"; if it finally says "Next" and the display stays dark with only the blue LED on, use the [CLI](https://meshtastic.org/docs/getting-started/flashing-firmware/esp32/cli-script) to flash Meshtasic to the node.
:::
The following process will manually place the device into the Espressif Firmware Download mode:
1. Switch off the device.
2. Connect the USB-C data cable to the device. A blue LED will illuminate while display stays black.
3. Press and hold the BOOT button to the right of the display.
4. Switch the device on.
5. After 2-3 seconds, release the BOOT button.
With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "Tlora T3s3 V1" from the device drop-down.
:::note
If after successfully flashing the device and the screen remains black, you may need to use the [CLI Script](https://meshtastic.org/docs/getting-started/flashing-firmware/esp32/cli-script) to flash Meshtastic.
:::
## Resources