diff --git a/docs/hardware/devices/rak/peripherals.mdx b/docs/hardware/devices/rak/peripherals.mdx
index f700f72d..6a6c8761 100644
--- a/docs/hardware/devices/rak/peripherals.mdx
+++ b/docs/hardware/devices/rak/peripherals.mdx
@@ -22,19 +22,30 @@ values={[
 
 ## GPS Modules
 
-### RAK5005-0 / RAK1910
+### RAK12500
 
-To add a GPS to the RAK5005-O base board, you need the [RAK1910 GPS sensor](https://store.rakwireless.com/collections/wisblock-sensor/products/rak1910-max-7q-gnss-location-sensor). It is supported on slot A of the 5005 board via UART.
+The [RAK12500 GPS sensor](https://store.rakwireless.com/products/wisblock-gnss-location-module-rak12500) is a newer GPS module and is generally preferred.
+
+- uBlox Zoe-M8Q GNSS receiver
+- GPS, GLONASS, QZSS and BeiDou satellite support
+
+The RAK12500 is supported on the following base boards & slots:
+
+- RAK19007 on slot A
+- RAK19003 on slot C
+
+### RAK1910
+
+The [RAK1910 GPS sensor](https://store.rakwireless.com/collections/wisblock-sensor/products/rak1910-max-7q-gnss-location-sensor) is the older of the supported GPS modules for RAK boards.
 
 - uBlox MAX-7Q GPS module
 - GPS and GLONASS satellite support
 
-### RAK19003 / RAK12500
+The RAK1910 is supported on the following base boards & slots:
 
-To add a GPS to the RAK19003 base board, you need the [RAK12500 GPS sensor](https://store.rakwireless.com/products/wisblock-gnss-location-module-rak12500). It is supported via I<sup>2</sup>C on slot B for firmware versions 1.49 and above.
-
-- uBlox Zoe-M8Q GNSS receiver
-- GPS, GLONASS, QZSS and BeiDou satellite support
+- RAK5005-0 on slot A
+- RAK19007 on slot A
+- RAK19003 on slot C
 
 ### Resources
 - RAK Documentation Center