Merge branch 'master' into i18n

docs/about/introduction.mdx

@@ -9,6 +9,9 @@ import Link from "@docusaurus/Link";
 
 Meshtastic® is a project that enables you to use inexpensive LoRa radios as a long range off-grid communication platform in areas without existing or reliable communications infrastructure. This project is 100% community driven and open source!
 
+
+![LoRa Topology](/img/introduction/lora-topology-2.png)
+
 ### Features
 
 - Long range ([_254km record by kboxlabs_](/docs/overview/range-tests#current-record))

docs/configuration/module/mqtt.mdx

@@ -146,11 +146,11 @@ values={[
 
 Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > MQTT: Turn on the slider for **MQTT enabled** and tap **Send**.
 
-[![MQTT Settings](/img/modules/mqtt/android_mqtt_sm.png)](/img/modules/mqtt/android_mqtt.png)
+[![MQTT Settings](/img/modules/mqtt/android_mqtt_encryption_sm.png)](/img/modules/mqtt/android_mqtt_encryption.png)
 
 *Optional:* To use your phone's internet connection to send and receive packets over the web, also enable the slider for **MQTT Client Proxy** and skip the Configure Network Settings step below.
 
-[![Client Proxy](/img/modules/mqtt/android_mqtt_proxy_sm.png)](/img/modules/mqtt/android_mqtt_proxy.png)
+[![Client Proxy](/img/modules/mqtt/android_mqtt_proxy_sm.png)](/img/modules/mqtt/android_mqtt_proxy_encryption.png)
 
 <h3>2. Enable Channel Uplink & Downlink</h3>
 
@@ -171,12 +171,12 @@ Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > Networ
 
 Navigate to Settings > MQTT: Turn on the slider for MQTT enabled and tap **Save**
 
-[![MQTT Settings 1](/img/modules/mqtt/apple_mqtt_1_sm.png)](/img/modules/mqtt/apple_mqtt_1.png)
+[![MQTT Settings 1](/img/modules/mqtt/apple_mqtt_1_encryption_sm.png)](/img/modules/mqtt/apple_mqtt_1_encryption.png)
 [![MQTT Settings 2](/img/modules/mqtt/apple_mqtt_2_sm.png)](/img/modules/mqtt/apple_mqtt_2.png)
 
 *Optional:* To use your phone's internet connection to send and receive packets over the web, also enable the slider for **MQTT Client Proxy** and skip the Configure Network Settings step below.
 
-[![Client Proxy](/img/modules/mqtt/apple_mqtt_1_proxy_sm.png)](/img/modules/mqtt/apple_mqtt_1_proxy.png)
+[![Client Proxy](/img/modules/mqtt/apple_mqtt_1_proxy_sm.png)](/img/modules/mqtt/apple_mqtt_1_proxy_encryption.png)
 
 <h3>2. Enable Channel Uplink & Downlink</h3>
 
@@ -231,11 +231,11 @@ meshtastic --set network.wifi_enabled true --set network.wifi_ssid "your network
 
 Navigate to Config > Module Config > MQTT - Turn on the slider for MQTT enabled - Click the **Save** icon.
 
-[![MQTT Settings](/img/modules/mqtt/web_mqtt_sm.png)](/img/modules/mqtt/web_mqtt.png)
+[![MQTT Settings](/img/modules/mqtt/web_mqtt_encryption_sm.png)](/img/modules/mqtt/web_mqtt_encryption.png)
 
 *Optional:* To use your client's internet connection to send and receive packets over the web, also enable the slider for **Proxy to Client Enabled** and skip the Configure Network Settings step below.
 
-[![Client Proxy](/img/modules/mqtt/web_mqtt_proxy_sm.png)](/img/modules/mqtt/web_mqtt_proxy.png)
+[![Client Proxy](/img/modules/mqtt/web_mqtt_proxy_sm.png)](/img/modules/mqtt/web_mqtt_proxy_encryption.png)
 
 :::caution
 

docs/getting-started/flashing-firmware/nrf52/drag-n-drop.mdx

@@ -1,6 +1,6 @@
 ---
 id: drag-n-drop
-title: Drag & Drop nRF52 Firmware Updates
+title: Drag & Drop nRF52 & RP2040 Firmware Updates
 sidebar_label: Drag & Drop (recommended)
 sidebar_position: 1
 ---
@@ -11,15 +11,23 @@ import Link from "@docusaurus/Link";
 
 ## Flash Firmware
 
-Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
+### nRF52
 
-1. Connect your device to your computer with a USB data cable.
-2. Double click the reset button on your device (this will put it into bootloader mode)
-3. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux)
-4. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`
-5. Drop the appropriate firmware file (`firmware-DEVICE_NAME-x.x.x-xxxxxxx.uf2`) from the release onto this drive.
+1. Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
+2. Connect your device to your computer with a USB data cable.
+3. Double click the reset button on your device (this will put it into bootloader mode).
+4. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux).
+5. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`.
+6. Copy the appropriate firmware file (`firmware-DEVICE_NAME-X.X.X-xxxxxxx.uf2`) from the release onto this drive.
+7. Once the file has finished copying onto the drive, the device will reboot and install the Meshtastic firmware.
 
-Once the file has finished copying onto the drive, the device will reboot and install the Meshtastic firmware.
+### RP2040
+1. Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
+2. Press the BOOTSEL button and while keeping it pressed, connect the device to your computer via a USB cable.
+3. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux).
+4. Open this drive and you should see two files: `INDEX.HTM` and `INFO_UF2.TXT`.
+5. Copy the appropriate firmware file (`firmware-DEVICE_NAME-X.X.X-xxxxxxx.uf2`) from the release onto this drive.
+6. Once the file has finished copying onto the drive, the device will reboot and install the Meshtastic firmware.
 
 ## Connect and Configure Device
 

docs/getting-started/flashing-firmware/nrf52/index.mdx

@@ -1,21 +1,21 @@
 ---
 id: flashing-nrf52-devices
-title: Flash nRF52 Devices
-sidebar_label: nRF52 Device
+title: Flash nRF52 & RP2040 Devices
+sidebar_label: nRF52/RP2040 Device
 sidebar_position: 2
 ---
 
-## Flashing Methods for nRF52 Devices
+## Flashing Methods for nRF52 and RP2040 Devices
 
-The nRF52 based devices have the easiest firmware upgrade process. No driver or software install is required on any platform.
+nRF52 and RP2040 based devices have the easiest firmware upgrade process. No driver or software install is required on any platform.
 
 ### Drag & Drop
-nRF52 devices use the [Drag & Drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) installation method to install firmware releases.
+nRF52 and RP2040 devices use the [Drag & Drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) installation method to install firmware releases.
 
 ### Over-The-Air (OTA)
 nRF52 devices are able to accept [OTA firmware updates](/docs/getting-started/flashing-firmware/nrf52/ota) from a mobile device over bluetooth.
 
-### Factory Erase
+### nRF Factory Erase
 You may wish to perform a [Factory Erase](/docs/getting-started/flashing-firmware/nrf52/nrf52-erase) prior to installing firmware to clear data that may change format and location between releases.
 
 ### Convert RAK4631-R to RAK4631

docs/getting-started/flashing-firmware/nrf52/nrf52-erase.mdx

@@ -1,25 +1,39 @@
 ---
 id: nrf52-erase
-title: Flash nRF52 Factory Erase
-sidebar_label: Factory Erase nRF52
+title: Flash nRF52/RP2040 Factory Erase
+sidebar_label: Factory Erase
 sidebar_position: 3
 ---
 
 import Link from "@docusaurus/Link";
 
-Meshtastic uses the [littlefs](https://github.com/littlefs-project/littlefs) library to store configuration, logs, and other data in the internal flash of nRF52 devices. Updating the firmware does _not_ erase this additional data, which can cause issues when the format and location of data changes between releases.
+Meshtastic uses the [littlefs](https://github.com/littlefs-project/littlefs) library to store configuration, logs, and other data in the internal flash of nRF52 & RP2040 devices. Updating the firmware does _not_ erase this additional data, which can cause issues when the format and location of data changes between releases.
+
+### nRF52
 
 To reset the flash storage on your nRF52 board:
 
-Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
+1. Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
+2. Connect your device to your computer with a USB data cable.
+3. Double click the reset button on your device (this will put it into bootloader mode)
+4. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux)
+5. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`
+6. Find the file included in the downloaded firmware named `Meshtastic_nRF52_factory_erase.uf2` and copy it onto the new drive. The device should reboot.
+7. With the [Meshtastic CLI](/docs/software/python/cli/) installed, open your Terminal/Console and enter the command: `meshtastic --noproto`.
+8. Press any key, you should see the message: `Formatting... Done`.
+
+Once the device has been erased, you can proceed to install the latest Meshtastic firmware on a clean storage filesystem by clicking the link below.
+
+### RP2040
+
+To reset the flash storage on your RP2040 board:
+
+1. Download [flash_nuke.uf2](https://datasheets.raspberrypi.com/soft/flash_nuke.uf2) to your computer.
+2. Press the BOOTSEL button and while keeping it pressed, connect it to your computer via a USB cable.
+3. The board should now appear as a mass storage device on your computer with the label RPI-RP2.
+4. Copy the flash_nuke.uf2 file to the device.
+5. The board will now restart and the flash memory will be erased.
 
-1. Connect your device to your computer with a USB data cable.
-2. Double click the reset button on your device (this will put it into bootloader mode)
-3. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux)
-4. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`
-5. Copy the included file named `Meshtastic_nRF52_factory_erase.uf2` onto the virtual disk device. The device should reboot.
-6. Connect to the device via serial console using the [Meshtastic CLI `--noproto`](/docs/software/python/cli/#--noproto) mode or a standalone serial client like `minicom`.
-7. Press any key, you should see the message: `Formatting... Done`.
 
 Once the device has been erased, you can proceed to install the latest Meshtastic firmware on a clean storage filesystem by clicking the link below.
 
@@ -28,6 +42,6 @@ Once the device has been erased, you can proceed to install the latest Meshtasti
     className={"button button--outline button--lg cta--button"}
     to={"/docs/getting-started/flashing-firmware/nrf52/"}
   >
-    Flash nRF52 Firmware
+    Flash nRF52/RP2040 Firmware
   </Link>
 </div>

docs/hardware/devices/tbeam/index.mdx

@@ -221,7 +221,9 @@ This is an earlier version of the T-Beam board. Due to changes in the design thi
 ## Resources
 
 - Firmware file: `firmware-tbeam-s3-core-X.X.X.xxxxxxx.bin`
-  - Purchase Link: [AliExpress](https://www.aliexpress.com/item/1005005418286231.html)
+- Purchase links:
+  - LilyGO Store: [Meshtastic T-Beam 433/868/915/923Mhz](https://www.lilygo.cc/products/t-beam-v1-1-esp32-lora-module)
+  - AliExpress: [Meshtastic T-Beam 868/915MHz](https://www.aliexpress.com/item/1005005418286231.html)
   - US Distributor - Purchase link: Rokland [NEO-M10S](https://store.rokland.com/products/lilygo-t-beam-supreme-esp32-s3-lora-development-board-sx1262-915mhz-gps-l76k-or-u-blox?variant=41051191378003), [Quectel L76K](https://store.rokland.com/products/lilygo-t-beam-supreme-esp32-s3-lora-development-board-sx1262-915mhz-gps-l76k-or-u-blox?variant=41051191345235)
 
 

docs/hardware/devices/techo/index.mdx

@@ -35,7 +35,8 @@ Further information on the LILYGO® T-Echo devices can be found on LILYGO®'s [G
 
 - Firmware file: `firmware-t-echo-2.x.x.uf2`
 - Purchase links:
-  - AliExpress: [Lilygo Official Store](https://www.aliexpress.com/item/1005003026107533.html)
+  - LilyGO Store: [T-Echo Meshtastic 433/868/915MHz](https://www.lilygo.cc/products/t-echo)
+  - AliExpress: [T-Echo Meshtastic 433/868/915MHz with optional BME280 sensor](https://www.aliexpress.com/item/1005003026107533.html)
   - US Distributor - Rokland: [915MHz](https://store.rokland.com/products/lilygo-ttgo-meshtastic-t-echo-white-lora-sx1262-wireless-module-915mhz-nrf52840-gps-for-arduino?ref=8Bb2mUO5i-jKwt) [915MHz BME280 Kit](https://store.rokland.com/products/lilygo-ttgo-meshtastic-t-echo-white-bme280-lora-sx1262-wireless-module-915mhz-nrf52840-gps-rtc-nfc-for-arduino?ref=8Bb2mUO5i-jKwt)
 
 ![LILYGO T-Echo](/img/hardware/t-echo.png)

package.json

@@ -40,10 +40,10 @@
     "@docusaurus/module-type-aliases": "3.0.0",
     "@tailwindcss/typography": "^0.5.10",
     "@tsconfig/docusaurus": "^2.0.2",
-    "@types/node": "^20.9.0",
-    "@types/react": "^18.2.37",
-    "@types/react-dom": "^18.2.15",
+    "@types/node": "^20.9.3",
+    "@types/react": "^18.2.38",
+    "@types/react-dom": "^18.2.16",
     "biome": "^0.3.3",
-    "typescript": "^5.2.2"
+    "typescript": "^5.3.2"
   }
 }

src/pages/downloads/index.tsx

@@ -60,11 +60,11 @@ const Firmware = (): JSX.Element => {
             </div>
             <div className="card m-4 border-2 border-secondary w-full">
               <div className="card__header">
-                <h3>nRF52 Drag & Drop</h3>
+                <h3>nRF52/RP2040 Drag & Drop</h3>
               </div>
               <div className="card__body">
                 <p>
-                  Devices such as T-Echo and RAK4631 are flashed via filesystem.
+                  Devices such as T-Echo, RAK4631, and RAK11300 are flashed via filesystem.
                 </p>
               </div>
               <div className="card__footer mt-auto">