From ca47fcf67e617867344ebe3cff7c4b28b85e8fc5 Mon Sep 17 00:00:00 2001 From: Garth Vander Houwen Date: Wed, 26 Oct 2022 08:01:04 -0700 Subject: [PATCH] add moduleconfig --- docs/settings/moduleconfig/index.mdx | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/settings/moduleconfig/index.mdx b/docs/settings/moduleconfig/index.mdx index 032484cf..71570314 100644 --- a/docs/settings/moduleconfig/index.mdx +++ b/docs/settings/moduleconfig/index.mdx @@ -9,9 +9,9 @@ Modules are included in the firmware and allow users to extend the functionality | Name | Description | |:----:|:-----------:| -| [Canned Message](docs/settings/config/canned-message) | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. | -| [External Notification](docs/settings/config/external-notification) | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) | -| [MQTT](docs/settings/config/mqtt) | Forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on another mesh over the internet. | -| [Range Test](docs/settings/config/range-test) | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver(s) will log all incoming messages to a CSV. | -| [Serial Module](docs/settings/config/serial) | Send messages across the mesh by sending strings over a serial port. | -| [Telemetry](docs/settings/config/telemetry) | Attach sensors to the device and transmit readings on a regular interval to the mesh. | +| [Canned Message](docs/settings/moduleconfig/canned-message) | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. | +| [External Notification](docs/settings/moduleconfig/external-notification) | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) | +| [MQTT](docs/settings/moduleconfig/mqtt) | Forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on another mesh over the internet. | +| [Range Test](docs/settings/moduleconfig/range-test) | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver(s) will log all incoming messages to a CSV. | +| [Serial Module](docs/settings/moduleconfig/serial) | Send messages across the mesh by sending strings over a serial port. | +| [Telemetry](docs/settings/moduleconfig/telemetry) | Attach sensors to the device and transmit readings on a regular interval to the mesh. |