Add nRF52 firmware installation instructions

website/docs/getting-started/flashing-esp32.md

@@ -1,7 +1,7 @@
 ---
-id: flashing-firmware
-title: Flashing Firmware
-sidebar_label: Flashing Firmware
+id: flashing-esp32
+title: Flashing ESP32 devices firmware
+sidebar_label: ESP32 devices
 ---
 import Tabs from '@theme/Tabs';
 import TabItem from '@theme/TabItem';

website/docs/getting-started/flashing-nrf52.md

@@ -0,0 +1,52 @@
+---
+id: flashing-nrf52
+title: Flashing nRF52 devices firmware
+sidebar_label: nRF52 devices
+---
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+
+## Download Latest Firmware
+
+Prebuilt binaries for the supported radios are available in our releases. Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
+
+<!--- TODO I'd like to create prettier buttons for this than just a table --->
+| [Current Firmware](https://github.com/meshtastic/meshtastic-device/releases/latest) | [List of Firmware Versions](https://github.com/meshtastic/meshtastic-device/releases/) |
+| :--------------: | :-----------------------: |
+
+
+## Install/Update Firmware
+:::caution
+Be careful to install the correct load for your board. While it is unlikely that you will cause damage to your device, the wrong firmware will cause it to not work.
+:::
+
+<Tabs
+  groupId="operating-system"
+  defaultValue="linux"
+  values={[
+    {label: 'Linux', value: 'linux'},
+    {label: 'macOS', value: 'macos'},
+    {label: 'Windows', value: 'windows'},
+  ]}>
+  <TabItem value="linux">
+
+  </TabItem>
+  <TabItem value="macos">
+
+
+  </TabItem>
+  <TabItem value="windows">
+
+Connect your device to your computer with a USB cable. If you computer complains about needing to format the new drive, cancel the format command.
+
+Double click the reset button on your device, this will put it into boot loader mode.
+
+A new drive will then appear on your computer. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`
+
+Copy the appropriate `firmware-xxxxx-1.2.x.uf2` file from the firmware zip file onto the new drive.
+
+Once the file has finished copying over, the device will reboot, loading the new firmware as it does.
+
+  </TabItem>
+</Tabs>
+

website/docs/getting-started/getting_started.md

@@ -32,6 +32,8 @@ If your device already has Meshtastic flashed to it, You can update it over the
 - Install using the command line interface (CLI)
 - Install using a graphical user interface (GUI)
 
+The firmware installation method will also depend on whether you have an ESP32 based device or a nRF52 based device. See our [hardware section](/docs/hardware) to determine which microcontroller your device is based on.
+
 ## Connect to your Device
 
 There are many ways to connect to your new radio!

website/sidebars.js

@@ -2,9 +2,11 @@ module.exports = {
   Sidebar: {
     "Getting Started": [
       "getting-started/overview",
-      "getting-started/flashing-firmware",
       {
-        "Howto's": [],
+        "Flashing firmware": [
+          "getting-started/flashing-esp32",
+          "getting-started/flashing-nrf52",
+        ],
       },
       "getting-started/concepts",
     ],