From d269806bd481151b93c68f2ea846d4835821c300 Mon Sep 17 00:00:00 2001 From: pdxlocations Date: Thu, 18 Jan 2024 09:42:36 -0800 Subject: [PATCH 1/3] t-echo does support ota --- docs/getting-started/flashing-firmware/nrf52/ota.mdx | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/getting-started/flashing-firmware/nrf52/ota.mdx b/docs/getting-started/flashing-firmware/nrf52/ota.mdx index 941f9769..4815d62f 100644 --- a/docs/getting-started/flashing-firmware/nrf52/ota.mdx +++ b/docs/getting-started/flashing-firmware/nrf52/ota.mdx @@ -8,7 +8,7 @@ sidebar_position: 2 import Tabs from "@theme/Tabs"; import TabItem from "@theme/TabItem"; -nRF52 devices from RAK are able to accept OTA firmware updates from a mobile device over bluetooth. The T-Echo bootloader does not have OTA support. +nRF52 devices from RAK are able to accept OTA firmware updates from a mobile device over bluetooth. Date: Thu, 18 Jan 2024 19:09:34 -0800 Subject: [PATCH 2/3] just new T-Echos --- docs/getting-started/flashing-firmware/nrf52/ota.mdx | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/getting-started/flashing-firmware/nrf52/ota.mdx b/docs/getting-started/flashing-firmware/nrf52/ota.mdx index 4815d62f..8f278bd5 100644 --- a/docs/getting-started/flashing-firmware/nrf52/ota.mdx +++ b/docs/getting-started/flashing-firmware/nrf52/ota.mdx @@ -8,7 +8,7 @@ sidebar_position: 2 import Tabs from "@theme/Tabs"; import TabItem from "@theme/TabItem"; -nRF52 devices from RAK are able to accept OTA firmware updates from a mobile device over bluetooth. +nRF52 devices from RAK are able to accept OTA firmware updates from a mobile device over bluetooth. Older T-Echo bootloaders do not have OTA support. Date: Sat, 20 Jan 2024 12:16:44 +0100 Subject: [PATCH 3/3] Clarify use of Neighbor Info Module --- docs/configuration/module/neighbor-info.mdx | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/configuration/module/neighbor-info.mdx b/docs/configuration/module/neighbor-info.mdx index 79b0f2ce..7f6416e6 100644 --- a/docs/configuration/module/neighbor-info.mdx +++ b/docs/configuration/module/neighbor-info.mdx @@ -9,6 +9,8 @@ import TabItem from "@theme/TabItem"; The Neighbor Info Module is for sending information on each node's 0-hop neighbors to the mesh. Config options are: Enabled and Update Interval. +In order to save bandwidth, Meshtastic does not keep track of the route a packet is taking to get to the destination, except when using Traceroute. When enabling this module, your node will periodically send out a packet with a list of its direct neighbors and the quality (SNR) of the corresponding link. If you enable this on all nodes, you can build up a graph of the full network to see how it is connected. At the time of writing, there are no clients visualizing it for you, but you can use e.g. MQTT to gather all the data. + In order to use it, make sure your devices use firmware version 2.2.0 or higher. ## Neighbor Info Module Config Values