mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2025-02-21 03:25:51 -08:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

Updated description

Browse source
This commit is contained in:
Psycardis 2025-01-14 17:53:53 -06:00 committed by GitHub
parent f0c5cdc39d
commit e3bdf7cd65
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 4 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
docs/configuration/radio/device.mdx
View file

@ -8,7 +8,7 @@ description: Learn about and compare device roles such as Client, Repeater, and
import Tabs from "@theme/Tabs";
import TabItem from "@theme/TabItem";
The device config options are: Role, Serial Output, and Debug Log. Device config uses an admin message sending a `Config.Device` protobuf.
The device config options are: Role, Rebroadcast Mode, Timezone, GPIOs, Buttons, and LEDs. Device config uses an admin message sending a `Config.Device` protobuf.
## Device Config Values
@ -56,9 +56,9 @@ This table shows the **default** values after selecting a preset. As always, ind
[^2]: The `ROUTER` role enables [Power Saving](/docs/configuration/radio/power/#power-saving) by default (ESP32 only). When needing to update a `ROUTER` via BLE, it's recommended you utilize an admin channel to temporarily change the role in order to update and then revert when done.
## Notes about Power Saving + Role behavior
### Notes about Power Saving + Role behavior
### ESP32 Platform Only
#### ESP32 Platform Only
Every role except for the `TRACKER` and `SENSOR` roles are capable of traditional _sleep_ behavior using the `power.is_power_saving` setting. When a node goes to sleep, in general, the serial console, peripherals, GPS, and WiFi/Bluetooth radio are all shut down to conserve power. The CPU will enter a low power state (light sleep or deep sleep on the ESP32). The LoRA radio will be left on stand-by for receiving any packets which will _wake up_ the device to resume services and respond.
@ -66,7 +66,7 @@ Timeout configurations of `display.screen_on_secs` (Screen timeout), `power.min_
For the `ROUTER` role, the `power.is_power_saving` behavior of sleep is enabled automatically and cannot be turned off.
### ESP32 and NRF52 Platforms
#### ESP32 and NRF52 Platforms
In the `TRACKER` and `SENSOR` roles, there are special sleep behaviors when combined with `power.is_power_saving`. For `TRACKER`, the device will go to sleep for `position.position_broadcast_secs` and upon waking will send a position packet when the GPS provides a valid location and repeat the cycle. For `SENSOR`, the device will go to sleep for `telemetry.environment_update_interval` and upon waking will gather environment data and send a telemetry packet and repeat the cycle. For both of these roles, the LoRA radio does not remain in standby mode to accept packets and wake up the device. Sleep remains constrained to their respective transmission intervals.
@ -184,7 +184,6 @@ meshtastic --set device.role CLIENT
```
```shell title="Set tzdef"
meshtastic --set device.tzdef UTC0
meshtastic --set device.tzdef 'CST6CDT,M3.2.0,M11.1.0'
```