From e796126008eaf5a42f396d74ce3e5475bcf9a3fd Mon Sep 17 00:00:00 2001
From: Ben Meadors <benmmeadors@gmail.com>
Date: Sun, 15 May 2022 13:19:00 -0500
Subject: [PATCH] list formatting

---
 .../flashing-firmware/flashing-external-serial-adapter.mdx    | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/docs/getting-started/flashing-firmware/flashing-external-serial-adapter.mdx b/docs/getting-started/flashing-firmware/flashing-external-serial-adapter.mdx
index 8a52b926..70da0048 100644
--- a/docs/getting-started/flashing-firmware/flashing-external-serial-adapter.mdx
+++ b/docs/getting-started/flashing-firmware/flashing-external-serial-adapter.mdx
@@ -43,9 +43,13 @@ There are multiple ways to connect the pins of the adapter to the target device:
 Disconnect your USB to Serial Adapter from the computer before starting this process. 
 
 1) Connect the RX pin of the adapter to the TX pin of the device
+
 2) Connect the TX pin of the adapter to the RX pin of the device
+
 3) Connect a GND pin of the adapter to the GND pin of the device
+
 4) Connect either the 5V pin of the adapter to the 5V pin of the device (illustrated) or the 3.3V pin of the adapter to the 3.3V pin of device.
+
 5) Bridge GPIO 0 to GND on the device with a jumper. (This places the device into flash mode when the device is powered up)
 
 Example wiring featuring a T-Beam