Restructure Hardware Pages (#1404)

* hide the mess! (#3)

* initial changes to folder structure

* redirect tests

* fix links

* fix links and redirects

* fix link and remove redirects for now

* fixing more broken links

* updates

* more broken links

* trunk fmt

* really forked something up

* another broken link

* really forked something up

* fixing links again

* LINKS FINALLY FIXED, added missing seeed devices

* stupid vs code

* I really hate vs code

* honestly, I despise vs code

* I want to kick vs code

* All this extra work for what

* spacing

* I really want to curse vs code

* spacing

* spacing

* Renamed folder

* had to go nuclear to fix

* trunk fmt

* add heltec vision master series

* fixing links

* test redirect

* need to rename heltec folder to allow for redirects

* needed to change raspberry-pi to raspberrypi

* oops fix links

* add chatter to index

* redirects -- I think this is comprehensive

* pesky comma

* no

* remove images

* smaller images

* indents and white spaces

* remove weird {" "}

* remove large photo

* add smaller image, use image that wasn't being used

docs/about/overview/range-test.mdx

@@ -30,6 +30,7 @@ values={[
 <h5 id="modem-settings-254">Modem Settings</h5>
 
 Default Long_Fast
+
 - **Frequency:** 915MHz
 - **Bandwidth:** 250
 - **Spread Factor:** 11
@@ -37,13 +38,13 @@ Default Long_Fast
 
 <h5 id="node-a-254">Node A</h5>
 
-- **Device:** [RAK4631 Core](https://meshtastic.org/docs/hardware/devices/rak/core-module)  with [RAK 5005-O Base Board](https://meshtastic.org/docs/hardware/devices/rak/base-board)
+- **Device:** [RAK4631 Core](/docs/hardware/devices/rak-wireless/wisblock/core-module/?rakcore=RAK4631) with [RAK 5005-O Base Board](/docs/hardware/devices/rak-wireless/wisblock/base-board/?rakbase=RAK5005-O)
 - **Firmware Version:** 2.1.17
 - **Antenna:** 902-928MHz 5.8 dBi Slinkdsco Outdoor
 
 <h5 id="node-b-254">Node B</h5>
 
-- **Device:** [RAK4631 Core](https://meshtastic.org/docs/hardware/devices/rak/core-module)  with [RAK 19003 Mini Base Board](https://meshtastic.org/docs/hardware/devices/rak/base-board)
+- **Device:** [RAK4631 Core](/docs/hardware/devices/rak-wireless/wisblock/core-module/?rakcore=RAK4631) with [RAK 19003 Mini Base Board](/docs/hardware/devices/rak-wireless/wisblock/base-board/?rakbase=RAK19003)
 - **Firmware Version:** 2.1.18
 - **Antenna:** Standard LoRa 915MHz 60mm 2dBi Omnidirectional
 
@@ -53,7 +54,6 @@ Default Long_Fast
 
 <img src="/img/records/kboxlabs_map.webp" alt="Geographic Locations" />
 
-
 ##### Previous Record 166km
 
 - **Range:** 166km (103 miles)
@@ -69,13 +69,13 @@ Default Long_Fast
 
 <h5 id="node-a-166">Node A</h5>
 
-- **Device:** [LILYGO TTGO T-Beam w/ SX1262](/docs/hardware/devices/tbeam)
+- **Device:** [LILYGO TTGO T-Beam w/ SX1262](/docs/hardware/devices/lilygo/tbeam/?t-beam=sx1262)
 - **Firmware Version:** 1.2
 - **Antenna:** [868MHz 5dBi Antenna](https://ivent.co.nz/product/category/1000/868mhz%205dbi%20antenna%20193mm%20black%20sma%20%28m%29/38646)
 
 <h5 id="node-b-166">Node B</h5>
 
-- **Device:** [LILYGO TTGO T-Beam w/ SX1262](/docs/hardware/devices/tbeam)
+- **Device:** [LILYGO TTGO T-Beam w/ SX1262](/docs/hardware/devices/lilygo/tbeam/?t-beam=sx1262)
 - **Firmware Version:** 1.2
 - **Antenna:** [868MHz Vertical 6dBi](https://ivent.co.nz/product/category/1000/868mhz%20vertical%206dbi%20antenna/38606)
 
@@ -85,8 +85,7 @@ Default Long_Fast
 
 ![Node B](https://canada1.discourse-cdn.com/free1/uploads/meshtastic/optimized/2X/1/1c8bd5fc41f7bab925404b657a9c481882de9313_2_1332x1000.jpeg)
 
-<h5>Resources Used</h5>
+<h5>Resources Used</h5>- http://www.heywhatsthat.com
-- http://www.heywhatsthat.com
 
 </TabItem>
 
@@ -103,6 +102,7 @@ Default Long_Fast
 <h5 id="modem-settings-206">Modem Settings</h5>
 
 Default Long_Fast
+
 - **Frequency:** 915MHz
 - **Bandwidth:** 250
 - **Spread Factor:** 11
@@ -110,13 +110,13 @@ Default Long_Fast
 
 <h5 id="node-a-206">Node A</h5>
 
-- **Device:** [LILYGO TTGO T-Beam](/docs/hardware/devices/tbeam)
+- **Device:** [LILYGO TTGO T-Beam](/docs/hardware/devices/lilygo/tbeam/?t-beam=1.1)
 - **Firmware Version:** 2.1.10
 - **Antenna:** Stock Antenna
 
 <h5 id="node-b-206">Node B</h5>
 
-- **Device:** [LILYGO TTGO T-Beam](/docs/hardware/devices/tbeam)
+- **Device:** [LILYGO TTGO T-Beam](/docs/hardware/devices/lilygo/tbeam/?t-beam=1.1)
 - **Firmware Version:** 2.1.10 (modified to place GPS in flight mode)
 - **Antenna:** Stock Antenna
 

docs/community/local-groups.mdx

@@ -17,103 +17,135 @@ organizer with an online presence and wish to be included in this list, please e
 us on [Discord](https://discord.com/invite/ktMAKGBnBs) to add your group.
 
 ## Argentina
+
 - [Meshtastic Argentina Community](https://github.com/Meshtastic-Argentina/)
 
 ## Australia
+
 ### Australian Capital Territory
+
 - [Canberra Meshtastic Community - Discord](https://discord.gg/4QgFsuaC3Z)
+
 ### Tasmania
+
 - [Meshtastic User Group Tasmania](https://www.facebook.com/groups/1556630645195649)
 
 ## Canada
+
 ### Alberta
+
 - [YYC Mesh](https://yycmesh.com/)
 - [Mesht Calgary](https://t.me/meshtcalgary)
 - [Mesht Alberta](https://t.me/meshtAlta)
 
 ### British Columbia
+
 - [Meshtastic BC users group](https://t.me/Mesh_BC)
 - [Meshtastic Dawson Creek BC users group](https://t.me/Mesh_BC_Dawson_Creek)
 
 ### Manitoba
+
 - [Mesht Manitoba](https://t.me/MeshtManitoba)
 
 ### New Brunswick
+
 - [Mesht New Brunswick](https://t.me/MeshtNB)
 
 ### Newfoundland
+
 - [Mesht Newfoundland](https://t.me/MeshtNewfoundland)
 
 ### Northwest Territories
+
 - [Mesht Northwest Territories](https://t.me/MeshtNWT)
 
 ### Nova Scotia
+
 - [Mesht Nova Scotia](https://t.me/MeshtNovaScotia)
 
 ### Ontario
+
 - [Mesht Ontario](https://t.me/meshtOnt)
 
 ### Prince Edward Island
+
 - [Mesht PEI](https://t.me/MeshtPEI)
 
 ### Quebec
+
 - [Mesht Quebec](https://t.me/meshtQuebec)
 
 ### Saskatchewan
+
 - [Mesht Saskatchewan](https://t.me/MeshtSaska)
 
 ## Finland
+
 - [Mesh Finland Discord](https://discord.com/invite/GHnaVAjqed)
 - [Mesh Finland Website](https://mesh-finland.github.io)
 
 ## Germany
+
 - [Meshtastic Users D-A-CH](https://t.me/meshtasticgermany) for technical chat
 - [Meshtastic Users Germany - Facebook](https://www.facebook.com/share/o6CZ9E35UmDKjp9U/)
 - [Mesh Hessen](https://t.me/Mesh_Hessen)
 
 ## India
+
 - [India Bir Paragliding](https://bircom.in)
 
 ## Israel
+
 - [Israel Meshtastic Club](https://t.me/+yUGsbNw3zp41MGFk)
 
 ## Italy
+
 - [Mesh_ITA Discord Server](https://discord.gg/ETFmtyzbFT)
 
 ## Lithuania
+
 - [Meshtastic Lietuva](https://www.facebook.com/groups/1122509422249414)
 
 ## Netherlands, The
+
 - [Meshtastic Netherlands Telegram](https://t.me/meshtastic_nl)
 - [MeshNet Meshtastic Community](https://www.meshnet.nl/)
 
 ## Poland
+
 - [Meshtastic Poland Matrix Space](https://matrix.to/#/#meshtasticpl:matrix.org)
 
 ## Taiwan
+
 - [Meshtastic Taiwan Community 臺灣鏈網 - Facebook](https://www.facebook.com/groups/413628121046386)
 - [Meshtastic Taiwan Community 臺灣鏈網 - Discord](https://discord.gg/2vZkuckp8E)
 
 ## Türkiye
+
 - [Meshtastic Türkiye Community - Telegram](https://t.me/trmesh)
 - [Meshtastic Türkiye Community - Discord](https://discord.gg/7TGnZSSA)
 - [Meshtastic Türkiye Community - Web](https://trmesh.org)
 
 ## Ukraine
+
 - [WiKi Meshtastic UA](https://wikimesh.pp.ua)
 
 ## United States
+
 - [Midwest Mesh](https://discord.gg/wYwD56K439)
 
 ### Arizona
+
 - [Tucson Meshtastic Community](https://discord.gg/7MzbMMd2kg)
 - [Arizona Meshtastic Community](https://azmsh.net)
 - [Mesa/Phoenix Meshtastic Community](https://discord.gg/wE39ZyCKu3)
 
 ### Arkansas
+
 - [Fort Smith Mesh](https://discord.com/invite/nwsvcXeqMX)
 
 ### California
+
 - [SoCal Mesh](https://socalmesh.org)
 - [Laguna Mesh](https://lagunamesh.com)
 - [Mission Viejo Mesh](https://missionviejomesh.org/)
@@ -126,52 +158,67 @@ us on [Discord](https://discord.com/invite/ktMAKGBnBs) to add your group.
 - [Sac Valley Mesh](http://www.sacvalleymesh.com)
 
 ### Colorado
+
 - [Denver Mesh](https://denvermesh.org)
 
 ### Hawaii
+
 - [Hawaii Meshnet](https://www.hawaiimesh.net/)
 
 ### Illinois
+
 - [Chicagoland Mesh](https://chicagolandmesh.org)
 
 ### Kansas
+
 - [SecKC Amateur Radio Club of Kansas City and Surrounding Cities for Amateur Radio](https://ks3ckc.radio/home)
 
 ### Massachusetts
+
 - [Boston Meshnet](https://github.com/Darachnid/Boston-Meshnet)
 
 ### Michigan
+
 - [Michigan Meshtastic Network](https://discord.gg/3A5RREcBcc)
 
 ### Missouri
+
 - [Kansas City Meshtastic Group](https://www.facebook.com/share/XZ9jnhxy1YT4wWqC/)
 - [MeshSTL - St. Louis](https://discord.gg/QYxUdKZpBd)
 
 ### Nevada
+
 - [VegasMesh Discord](https://discord.gg/vUmWuZxYPh)
 
 ### New Mexico
+
 - [Albuquerque Mesh](https://www.abqm.net)
 
 ### Ohio
+
 - [Cincy Mesh](https://www.cincymesh.org)
 
 ### Oklahoma
+
 - [Oklahoma Meshtastic Group](https://www.facebook.com/groups/942404880478488)
 
 ### Oregon
+
 - [Southern Oregon Meshtastic Community](https://sites.google.com/view/someshtastic/home)
 - [PDXMesh for Portland & SW Washington](https://pdxmesh.com)
 - [Willamette Valley Mesh Eugene / Springfield](https://discord.gg/gf4mShtJz4)
 
 ### Tennessee
+
 - [Nashville Meshville](https://meshville.org/)
 
 ### Texas
+
 - [Austin Mesh](https://austinmesh.org/)
 - [Cypress, Texas Meshtastic Club](https://discord.gg/KzuwNRwE6q)
 
 ### Wisconsin
+
 - [Meshconsin](https://meshconsin.org)
 
 ### Japan

docs/getting-started/flashing-firmware/esp32/cli-script.mdx

@@ -17,9 +17,9 @@ Make sure not to power the radio on without first attaching the antenna! You cou
 Before you flash your device start by verifying connectivity with the device being flashed. Outlined below are steps that can be taken to verify connectivity and, if necessary, to install the appropriate drivers. If you end up needing to install drivers be sure to reboot your computer afterwards to verify the installation is complete.
 
 :::note
-The [T-Beam 0.7](/docs/hardware/devices/tbeam/?t-beam=0.7) board is an earlier version of the T-Beam board, and due to changes in the design in subsequent iterations this board uses a specific firmware file different from the other T-Beam boards.
+The [T-Beam 0.7](/docs/hardware/devices/lilygo/tbeam/?t-beam=0.7) board is an earlier version of the T-Beam board, and due to changes in the design in subsequent iterations this board uses a specific firmware file different from the other T-Beam boards.
 
-`firmware-tbeam0.7-X.X.X.xxxxxxx.bin` is the correct firmware. `firmware-tbeam-X.X.X.xxxxxxx.bin` is incompatible. For all other [T-Beam](/docs/hardware/devices/tbeam) boards `firmware-tbeam-X.X.X.xxxxxxx.bin` is the correct selection.
+`firmware-tbeam0.7-X.X.X.xxxxxxx.bin` is the correct firmware. `firmware-tbeam-X.X.X.xxxxxxx.bin` is incompatible. For all other [T-Beam](/docs/hardware/devices/lilygo/tbeam) boards review the resources section for the correct selection.
 :::
 
 ## Command Line Interface Instructions

docs/hardware/devices/b-and-q-consulting/index.mdx

@@ -0,0 +1,25 @@
+---
+id: b-and-q-consulting
+title: B&Q Consulting Devices
+sidebar_label: B&Q Consulting
+sidebar_position: 5
+---
+
+## [Nano Series](./nano/)
+
+Portable and durable devices designed for Meshtastic.
+
+| Name                                         | MCU         | Radio  |     WiFi     | BT  | GPS |
+| :------------------------------------------- | :---------- | :----- | :----------: | :-: | :-: |
+| [Nano G2 Ultra](./nano/?nano-series=g2)      | NRF52840    | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
+| [Nano G1 Explorer](./nano/?nano-series=g1-e) | ESP32 WROOM | SX1262 | 2.4GHz b/g/n | 4.2 | YES |
+| [Nano G1](./nano/?nano-series=g1)            | ESP32 WROOM | SX1276 | 2.4GHz b/g/n | 4.2 | YES |
+
+## [Station Series](./station-series/)
+
+High power LoRa transceiver designed for Meshtastic Licensed HAM operation.
+
+| Name                            | MCU              | Radio  |     WiFi     | BT  |   GPS    |
+| :------------------------------ | :--------------- | :----- | :----------: | :-: | :------: |
+| [Station G1](./station-series/) | ESP32 WROOM      | SX1262 | 2.4GHz b/g/n | 4.2 | OPTIONAL |
+| [Station G2](./station-series/) | ESP32-S3 WROOM-1 | SX1262 | 2.4GHz b/g/n | 5.0 | OPTIONAL |

docs/hardware/devices/b-and-q-consulting/nano/buttons.mdx

@@ -28,7 +28,7 @@ values={[
 - **User/Program Button:**
   - **Single press:** Changes the information page displayed on the device's screen.
   - **Double press:** Sends an adhoc ping of the device's position to the network.
-  - **Long press:** Will signal the device to shutdown after 5 seconds (*soft off*).
+  - **Long press:** Will signal the device to shutdown after 5 seconds (_soft off_).
 - **Message Read Button:**
   - **Single press:** Clears the New Message LED.
 
@@ -44,7 +44,6 @@ values={[
   - **Toggle Up:** Selects Buzzer for Enhanced Message Notification Circuit.
   - **Toggle Down:** Selects LED for Enhanced Message Notification Circuit.
 
-
 </TabItem>
  <TabItem value="g1-e">
 
@@ -73,7 +72,5 @@ values={[
 </TabItem>
 <TabItem value="g1">
 
-
-
 </TabItem>
 </Tabs>

docs/hardware/devices/b-and-q-consulting/nano/index.mdx

@@ -2,7 +2,7 @@
 id: nano-series
 title: Nano Series
 sidebar_label: Nano Series
-sidebar_position: 8
+sidebar_position: 1
 ---
 
 import Tabs from "@theme/Tabs";

docs/hardware/devices/b-and-q-consulting/station-series/index.mdx

@@ -2,7 +2,7 @@
 id: station-series
 title: Station Series
 sidebar_label: Station Series
-sidebar_position: 9
+sidebar_position: 2
 ---
 
 import Tabs from "@theme/Tabs";

docs/hardware/devices/heltec-automation/index.mdx

@@ -0,0 +1,34 @@
+---
+id: heltec-automation
+title: HELTEC® Devices
+sidebar_label: HELTEC®
+sidebar_position: 4
+---
+
+## [LoRa 32](./lora32/)
+
+Inexpensive basic ESP32-based boards.
+
+| Name                                                              | MCU         | Radio  |     WiFi     | BT  | GPS |
+| :---------------------------------------------------------------- | :---------- | :----- | :----------: | :-: | :-: |
+| [LoRa32 V2.1](./lora32/?heltec=v2.1)                              | ESP32       | SX127x | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V3/3.1](./lora32/?heltec=v23)                             | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Wireless Stick Lite V3](./lora32/?heltec=Wireless+Stick+Lite+V3) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Wireless Tracker](./lora32/?heltec=tracker)                      | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
+| [Wireless Paper](./lora32/?heltec=paper)                          | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+
+## [Plug & Play Sensors](./sensor/)
+
+| Name                    | MCU         | Radio  | WiFi         | BT  | GPS |
+| ----------------------- | ----------- | ------ | ------------ | --- | --- |
+| [Capsule V3](./sensor/) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
+
+### [Vision Master](./vision-master/)
+
+Versatile ESP32-S3-based boards E-Ink development boards.
+
+| Name                                                             | MCU        | Radio  |     WiFi     | BT  | GPS |
+| :--------------------------------------------------------------- | :--------- | :----- | :----------: | :-: | :-: |
+| [Vision Master E213](./vision-master/?heltec=vision_master_e213) | ESP32-S3R8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Vision Master E290](./vision-master/?heltec=vision_master_e290) | ESP32-S3R8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Vision Master T190](./vision-master/?heltec=vision_master_t190) | ESP32-S3R8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |

docs/hardware/devices/heltec-automation/lora32/buttons.mdx

@@ -1,6 +1,6 @@
 ---
 id: buttons
-title: Heltec LoRa 32 Hardware Buttons
+title: HELTEC® LoRa 32 Buttons
 sidebar_label: Buttons
 sidebar_position: 1
 ---

docs/hardware/devices/heltec-automation/lora32/index.mdx

@@ -1,8 +1,8 @@
 ---
-id: heltec
+id: lora32
 title: HELTEC® LoRa 32
-sidebar_label: HELTEC® LoRa 32
+sidebar_label: LoRa 32
-sidebar_position: 7
+sidebar_position: 1
 ---
 
 import Tabs from "@theme/Tabs";
@@ -57,10 +57,6 @@ Not recommended because of design issues! Support is being phased out. Use V3 in
 
 ## V3/V3.1
 
-:::caution
-Be careful when interacting with the USB-C port. This device does not have ESD protection for the CP2102 USB to UART bridge chip.
-:::
-
 :::info
 This device may have issues charging a connected battery if utilizing a USB-C to USB-C cable. It's recommended to use a USB-A to USB-C cable.
 :::
@@ -82,7 +78,7 @@ This device may have issues charging a connected battery if utilizing a USB-C to
 
 ### V3.1 differences
 
-Firmware remains the same as V3 below. Compare schematics: [V3.0](https://web.archive.org/web/20221127054612/https://resource.heltec.cn/download/WiFi_LoRa32_V3/HTIT-WB32LA(F)_V3_Schematic_Diagram.pdf) and [V3.1](https://resource.heltec.cn/download/WiFi_LoRa_32_V3/HTIT-WB32LA(F)_V3.1_Schematic_Diagram.pdf). Key differences:
+Firmware remains the same as V3 below. Compare schematics: [V3.0](<https://web.archive.org/web/20221127054612/https://resource.heltec.cn/download/WiFi_LoRa32_V3/HTIT-WB32LA(F)_V3_Schematic_Diagram.pdf>) and [V3.1](<https://resource.heltec.cn/download/WiFi_LoRa_32_V3/HTIT-WB32LA(F)_V3.1_Schematic_Diagram.pdf>). Key differences:
 
 - Removal of [FDG6322C](https://www.mouser.com/datasheet/2/308/1/FDG6322C_D-2312203.pdf) (a dual N & P channel FET) from the V3.1 power supply.
 - Antenna filter values in V3.1 (L11 = 1.8pF, C15 = 2.7nH, C24 = 1.8pF) align more closely with ESP32-S3 reference design than V3.0 (L11 = 1.6nH, C15 = 6.9pF, C24 = 2.4pF).
@@ -243,8 +239,6 @@ Image Source: [Heltec](https://heltec.org/project/wireless-tracker/)
 This device may have issues charging a connected battery if utilizing a USB-C to USB-C cable. It's recommended to use a USB-A to USB-C cable.
 :::
 
-
-
 - **MCU:**
   - ESP32-S3FN8 (WiFi & Bluetooth)
 - **LoRa Transceiver:**
@@ -285,7 +279,6 @@ This device may have issues charging a connected battery if utilizing a USB-C to
 This device may have issues charging a connected battery if utilizing a USB-C to USB-C cable. It's recommended to use a USB-A to USB-C cable.
 :::
 
-
 - **MCU:**
   - ESP32-S3FN8 (WiFi & Bluetooth)
 - **LoRa Transceiver:**

docs/hardware/devices/heltec-automation/lora32/peripherals.mdx

@@ -1,6 +1,6 @@
 ---
 id: peripherals
-title: Heltec ESP32 V3 Supported Peripherals
+title: Heltec® LoRa 32 Peripherals
 sidebar_label: Peripherals
 sidebar_position: 3
 ---
@@ -22,21 +22,26 @@ values={[
 ## GPS Module
 
 ### Introduction
+
 This informational guide outlines the process of enhancing the Heltec ESP32 V3 board by integrating the GT-U7 GPS Module. The addition of this module provides precise GPS capabilities and a real-time clock (RTC), eliminating the need for WiFi or a smartphone for time tracking. This enhancement is particularly beneficial for the mesh, where tracking the duration since the last seen device is crucial.
 However, it's important to note that the GPS module increases the power demand of your node. We'll address this by detailing how to incorporate a switch or an NPN 2N2222 transistor into your setup. This enables firmware-controlled power management, conserving battery life without sacrificing functionality.
 
 It is important to note that the GPS module increases the power demand of the node. This guide details the incorporation of a switch or an NPN 2N2222 transistor to enable firmware-controlled power management, conserving battery life without compromising functionality.
 
 ### Benefits
+
 - **GPS Capabilities**: Provides the node with the ability to determine its location with high precision, which is invaluable for tracking, mapping, and various other applications requiring location data.
 - **Real-Time Clock (RTC)**: Ensures accurate timekeeping on the mesh network without relying on external time sources such as the internet or a connected smartphone.
 
 ### Power Consumption Considerations
+
 The GT-U7 module is known for its high power consumption, which can potentially shorten the battery lifespan of the node. To mitigate this, two approaches are recommended:
+
 - **Manual Switch**: A simple on/off switch for the GPS module, allowing for manual power management.
 - **NPN 2N2222 Transistor**: Facilitates automatic power control through the firmware, enabling the device to turn off the GPS module based on specific conditions or after a set period.
 
 ### Materials Needed
+
 - Heltec ESP32 V3 board
 - GT-U7 GPS Module
 - NPN 2N2222 Transistor
@@ -58,7 +63,7 @@ The GT-U7 module is known for its high power consumption, which can potentially
 
 ### Wiring Diagram
 
-![HeltecESP32V3-gps-module](</img/hardware/HeltecESP32V3-gps-module.webp>)
+![HeltecESP32V3-gps-module](/img/hardware/HeltecESP32V3-gps-module.webp)
 
 ### Troubleshooting Tips
 
@@ -88,4 +93,3 @@ Coming Soon
 
 </TabItem>
 </Tabs>
-

docs/hardware/devices/heltec-automation/sensor/buttons.mdx

@@ -0,0 +1,11 @@
+---
+id: buttons
+title: Heltec Sensor Hardware Buttons
+sidebar_label: Buttons
+sidebar_position: 1
+---
+
+## Capsule Sensor V3
+
+- **Long press 3 seconds:** Power on or shutdown.
+- **Long press 8/16 seconds:** Long press for 8~16 seconds in the shutdown state until the blue indicator lights up. At this time, the device enters the WirelessBoot mode, which can be used to upload firmware.

docs/hardware/devices/heltec-automation/sensor/index.mdx

@@ -1,8 +1,8 @@
 ---
 id: heltec-sensors
-title: Heltec® Plug&Play Sensors
+title: HELTEC® Plug&Play Sensors
-sidebar_label: HELTEC® Sensors
+sidebar_label: Sensors
-sidebar_position: 7
+sidebar_position: 2
 ---
 
 import Tabs from "@theme/Tabs";
@@ -41,29 +41,35 @@ Capsule Sensor V3 uses WirelessBoot mode to upload firmware, exchange informatio
 That is, whether you update the firmware locally or via the Web, You need to get the device into WirelssBoot state first.
 :::
 Refer to this link for how to upload firmware for Capsule Sensor V3: [**Wireless Boot**](https://docs.heltec.org/en/node/esp32/capsule_sensor_v3/wireless_boot.html#).
+
 ### Touch button/Physical button differences
 
 :::warning
 Because the touch button is easy to accidentally activate while close to metal or in your pocket, Heltec has discontinued production of this version. However, a small number of samples have entered the market.
 :::
+
 - Button differences
-![Capsule Sensor V3 Button](</img/hardware/heltec/capsule-sensor-v3-button.webp>)
+  ![Capsule Sensor V3 Button](/img/hardware/heltec/capsule-sensor-v3-button.webp)
 - Other hardware differences
   1. Removal of [FDG6322C](https://www.mouser.com/datasheet/2/308/1/FDG6322C_D-2312203.pdf) (a dual N & P channel FET) from the physical-button version.
   2. Antenna filter values physical-button version (L11 = 1.8pF, C15 = 2.7nH, C24 = 1.8pF) align more closely with ESP32-S3 reference design than touch-button version (L11 = 1.6nH, C15 = 6.9pF, C24 = 2.4pF).
 
 ### Features
+
 - Meshtastic preinstalled.
 - Built-in battery.
 - Sensor replaceable.
 
 ### Pin
+
 - Connector:
   - Model name: [DF12NB(3.0)-10DS-0.5V(51)](https://resource.heltec.cn/download/Heltec%20Capsule%20Sensor%20V3/Connector.pdf)
   - Pin:
-    ![Capsule Sensor V3 pin](</img/hardware/heltec/capsule-connector.webp>)
+    ![Capsule Sensor V3 pin](/img/hardware/heltec/capsule-connector.webp)
 - More pin definitions please refer [Schematic Diagram](https://resource.heltec.cn/download/Heltec%20Capsule%20Sensor%20V3/Capsule_Main_Esp32_Schematic_Diagram.pdf)
+
 ### Resources
+
 - Firmware file: `firmware-heltec_capsule_sensor_v3-X.X.X.xxxxxx.bin`
 - Purchase links
   - International

docs/hardware/devices/heltec-automation/vision-master/buttons.mdx

@@ -0,0 +1,28 @@
+---
+id: buttons
+title: Vision Master Hardware Buttons
+sidebar_label: Buttons
+sidebar_position: 1
+---
+
+## Functionality
+
+### Vision Master E213/E290
+
+- **RST Button(side):**
+  - **Single press:** Resets the device.
+- **GPIO21 Button(side):**
+  - **Long press:** Will signal the device to shutdown after 5 seconds.
+  - **Single press:** Changes the information page displayed on the device's screen.
+  - **Double press:** Sends an adhoc ping of the device's position to the network.
+  - **Triple press:** Enables/Disables the GPS Module on demand. If an NPN Transistor is added it will cut power to the GPS board. The NPN pin must be configured on the PIN_GPS_EN inside the Position module in the App for this switching to work.
+
+### Vision Master T190
+
+- **RST Button(side):**
+  - **Single press:** Resets the device.
+- **BOOT Button(top):**
+  - **Long press:** Will signal the device to shutdown after 5 seconds.
+  - **Single press:** Changes the information page displayed on the device's screen.
+  - **Double press:** Sends an adhoc ping of the device's position to the network.
+  - **Triple press:** Enables/Disables the GPS Module on demand. If an NPN Transistor is added it will cut power to the GPS board. The NPN pin must be configured on the PIN_GPS_EN inside the Position module in the App for this switching to work.

docs/hardware/devices/heltec-automation/vision-master/index.mdx

@@ -0,0 +1,206 @@
+---
+id: vision-master
+title: HELTEC® Vision Master
+sidebar_label: Vision Master
+sidebar_position: 3
+---
+
+import Tabs from "@theme/Tabs";
+import TabItem from "@theme/TabItem";
+
+<Tabs
+groupId="heltec"
+queryString="heltec"
+defaultValue="vision_master_e213"
+values={[
+{label: 'Vision Master E213', value: 'vision_master_e213'},
+{label: 'Vision Mater E290', value:'vision_master_e290'},
+{label: 'Vision Master T190', value:'vision_master_t190'}
+]}>
+<TabItem value="vision_master_e213">
+
+## Vision Master E213
+
+- **MCU:**
+  - ESP32-S3R8 (WiFi & Bluetooth)
+- **LoRa Transceiver:**
+  - HT-RA62(Semtech SX1262)
+- **Frequency Options:**
+  - 433 MHz
+  - 470 - 510 MHz
+  - 863 - 870 MHz
+  - 902 - 928 MHz
+- **Connectors:**
+  - USB-C
+  - 2x1.25 lithium battery interface
+  - 2 x SH1.0-4P sensor interface
+  - Antenna:
+    - U.FL/IPEX antenna connector for LoRa
+    - Integrated 2.4 GHz PCB antenna, U.FL/IPEX antenna connector for 2.4 GHz.
+
+### Features
+
+- Onboard 2.13-inch black and white E-Ink display screen
+- Boot, Reset, and Custom(GPIO 21) switches
+- No GPS
+
+### Flashing
+
+To flash ESP32-S3 devices like the Vission Master E213, you typically need to place them in Espressif's firmware download mode. Use the "1200bps reset" button in the web flasher to do this. If this method does not work for any reason, you can follow the manual process below.
+
+:::warning
+
+Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
+
+:::
+
+The following process will manually place the device into the Espressif Firmware Download mode:
+
+1. Unplug the device.
+2. Press and hold the BOOT button.
+3. Plug the device in.
+4. After 2-3 seconds, release the BOOT button.
+
+With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "Heltec Vision Master E213" from the device drop-down.
+
+### Pin Map
+
+![HT-VME213_PIN_MAP](/img/hardware/heltec/HT-VME213_PIN_MAP.webp)
+
+Image Source: [Heltec](https://resource.heltec.cn/download/HT-VME213/HT-VME213.png)
+
+### Resources
+
+There is an additional interface on the board for 2.4GHz wireless signals. When connecting an external antenna, the resistor needs to be rotated 90 degrees to the left. For more details, please check the [FAQ on Heltec's official website](https://heltec.org/project/vision-master-e213/).
+
+- Firmware file: `firmware-heltec-vision-master-e213-X.X.X.xxxxxxx.bin`
+- Purchase Links:
+  - [Heltec](https://heltec.org/project/vision-master-e213/)
+  - [AliExpress](https://www.aliexpress.com/item/1005007209756502.html)
+
+</TabItem>
+<TabItem value="vision_master_e290">
+
+## Vision Master E290
+
+- **MCU:**
+  - ESP32-S3R8 (WiFi & Bluetooth)
+- **LoRa Transceiver:**
+  - HT-RA62(Semtech SX1262)
+- **Frequency Options:**
+  - 433 MHz
+  - 470 - 510 MHz
+  - 863 - 870 MHz
+  - 902 - 928 MHz
+- **Connectors:**
+  - USB-C
+  - 2x1.25 lithium battery interface
+  - SH1.0-4P sensor interface
+  - Antenna:
+    - U.FL/IPEX antenna connector for LoRa
+    - Integrated 2.4 GHz PCB antenna, U.FL/IPEX antenna connector for 2.4 GHz.
+
+### Features
+
+- Onboard 2.90-inch black and white E-Ink display screen
+- Boot, Reset, and Custom(GPIO 21) switches
+- Raspberry Pi GPIO famale header - 2x20
+- No GPS
+
+### Flashing
+
+To flash ESP32-S3 devices like the Vission Master E290, you typically need to place them in Espressif's firmware download mode. Use the "1200bps reset" button in the web flasher to do this. If this method does not work for any reason, you can follow the manual process below.
+
+:::warning
+
+Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
+
+:::
+
+The following process will manually place the device into the Espressif Firmware Download mode:
+
+1. Unplug the device.
+2. Press and hold the BOOT button.
+3. Plug the device in.
+4. After 2-3 seconds, release the BOOT button.
+
+With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "Heltec Vision Master E290" from the device drop-down.
+
+### Pin Map
+
+![HT-VME290_PIN_MAP](/img/hardware/heltec/HT-VME290_PIN_MAP.webp)
+
+Image Source: [Heltec](https://resource.heltec.cn/download/HT-VME290/HT-VME290%20Pin%20map.png)
+
+### Resources
+
+There is an additional interface on the board for 2.4GHz wireless signals. When connecting an external antenna, the resistor needs to be rotated 90 degrees to the left. For more details, please check the [FAQ on Heltec's official website](https://heltec.org/project/vision-master-e290/).
+
+- Firmware file: `firmware-vision-master-e290-X.X.X.xxxxxxx.bin`
+- Purchase Links:
+  - [Heltec](https://heltec.org/project/vision-master-e290/)
+  - [AliExpress](https://www.aliexpress.com/item/1005007234361986.html)
+
+</TabItem>
+<TabItem value="vision_master_t190">
+
+## Vision Master T190
+
+- **MCU:**
+  - ESP32-S3R8 (WiFi & Bluetooth)
+- **LoRa Transceiver:**
+  - HT-RA62(Semtech SX1262)
+- **Frequency Options:**
+  - 433 MHz
+  - 470 - 510 MHz
+  - 863 - 870 MHz
+  - 902 - 928 MHz
+- **Connectors:**
+  - USB-C
+  - 2x1.25 lithium battery interface
+  - SH1.0-4P sensor interface
+  - Antenna:
+    - U.FL/IPEX antenna connector for LoRa
+    - Integrated 2.4 GHz PCB antenna, U.FL/IPEX antenna connector for 2.4 GHz.
+
+### Features
+
+- Onboard 1.90-inch TFT-LCD color screen
+- Boot, Reset, and USER switches
+- No GPS
+
+### Flashing
+
+To flash ESP32-S3 devices like the Vission Master T190, you typically need to place them in Espressif's firmware download mode. Use the "1200bps reset" button in the web flasher to do this. If this method does not work for any reason, you can follow the manual process below.
+
+:::warning
+
+Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.
+
+:::
+
+The following process will manually place the device into the Espressif Firmware Download mode:
+
+1. Unplug the device.
+2. Press and hold the BOOT button.
+3. Plug the device in.
+4. After 2-3 seconds, release the BOOT button.
+
+With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "Heltec Vision Master T190" from the device drop-down.
+
+### Pin Map
+
+![HT-VMT190_PIN_MAP](/img/hardware/heltec/HT-VMT190_PIN_MAP.webp)
+
+Image Source: [Heltec](https://resource.heltec.cn/download/HT-VMT190/HT-VMT190%20pin%20map.png)
+
+### Resources
+
+There is an additional interface on the board for 2.4GHz wireless signals. When connecting an external antenna, the resistor needs to be rotated 90 degrees to the left. For more details, please check the [FAQ on Heltec's official website](https://heltec.org/project/vision-master-t190/).
+
+- Firmware file: `firmware-vision-master-t190-X.X.X.xxxxxxx.bin`
+- Purchase Links:
+  - [Heltec](https://heltec.org/project/vision-master-t190/)
+
+</TabItem>
+</Tabs>

docs/hardware/devices/heltec-sensor/buttons.mdx

@@ -1,11 +0,0 @@
----
-id: buttons
-title: Heltec Sensor Hardware Buttons
-sidebar_label: Buttons
-sidebar_position: 1
----
-
-## Capsule Sensor V3
-
-  - **Long press 3 seconds:** Power on or shutdown.
-  - **Long press 8/16 seconds:** Long press for 8~16 seconds in the shutdown state until the blue indicator lights up. At this time, the device enters the WirelessBoot mode, which can be used to upload firmware.

docs/hardware/devices/heltec-sensor/peripherals.mdx

@@ -1,51 +0,0 @@
----
-id: peripherals
-title: Heltec Sensor Peripherals
-sidebar_label: Peripherals
-sidebar_position: 3
----
-
-import Tabs from "@theme/Tabs";
-import TabItem from "@theme/TabItem";
-
-<Tabs
-groupId="heltec"
-queryString="heltec"
-defaultValue="capsule-sensor-v3"
-values={[
-{label: 'Capsule Sensor V3', value: 'capsule-sensor-v3'},
-]}>
-<TabItem value="capsule-sensor-v3">
-
-## Capsule Sensor V3
-
-### Introduction
-Strong extensibility is an important feature of Capsule Sensor V3. By replacing the sensor module at the bottom of the device, the device can be flexibly used in various occasions.
-
-:::warning
-Different sensors may require different firmware versions, and the current version is based on the GNSS version. We will update the other firmware as soon as possible.
-:::
-
-### Heltec sensor type
-:::info
-Each Capsule Sensor V3 comes with a sensor module by default when you buy it, you just need to choose it at the time of purchase. You can also purchase other sensors which is Capsule Sensor V3   from Heltec, and we will continue to expand the variety of these sensors.
-:::
-  - GNSS: [Quectel_L76K_V1](https://resource.heltec.cn/download/Heltec%20Capsule%20Sensor%20V3/Quectel_L76K_V1.1-1.pdf)
-  - Temperature&Humidity: [GXHTC3_EN_V2.4](https://heltec.org/project/temp-humi-sensor/)
-  - 3-Axis: [DA217](https://heltec.org/project/3-axis-acceleration-sensor/)
-  - Atmospheric pressure sensor: [BMP280](https://heltec.org/project/atmospheric-pressure-sensor/)
-
-### Sensor module replacement step
-![Capsule Sensor V3 Button](</img/hardware/heltec/capsule-sensor-extensibility.webp>)
- 1. Shutdown of device.
- 2. Remove the bottom screw of the device and remove the back cover.
- 3. Gently remove the old module.
- 4. Plug in the new sensors.
- 5. Close the cap and return the screw. If the firmware is not compatible, download a new one.
-:::warning
-Be careful not to screw too hard, otherwise it will damage the plastic structure. Also note the direction of the charging interface.
-:::
-
-</TabItem>
-</Tabs>
-

docs/hardware/devices/index.mdx

@@ -26,134 +26,183 @@ Please do your research and choose the board that meets your needs (or maybe alr
 - The Semtech SX1262 transceiver is newer than the SX1276 and provides increased receive and transmit performance.
 - nRF52-based devices use a fraction of the power compared to ESP32-based devices and are therefore generally preferred for solar and handset applications.
 - ESP32-based devices require more power to operate but are typically lower-cost alternatives that do perform well when using house power, or for handsets that only require a day or two of runtime, and for applications that require WiFi connectivity.
+
 :::
 
-### [RAK Wisblock](./rak/)
+## RAK®
+
+### [Wisblock](./rak-wireless/wisblock/)
 
 Modular hardware system with Base, Core and Peripheral modules including the low-power and solar ready nRF52840-based Meshtastic Starter Kit (19007 & 4631).
 
-[**WisBlock Core Modules**](./rak/core-module/)<br/>
+[**WisBlock Core Modules**](./rak-wireless/wisblock/core-module/)<br/>
 | Name | MCU | Radio | WiFi | BT | GPS |
 |:-----------------------------------------------|:---------|:-------|:------------:|:---:|:------:|
-| [RAK4631](./rak/core-module?rakcore=RAK4631) | nRF52840 | SX1262 | NO | 5.0 | add-on |
+| [RAK4631](./rak-wireless/wisblock/core-module?rakcore=RAK4631) | nRF52840 | SX1262 | NO | 5.0 | add-on |
-| [RAK11200](./rak/core-module?rakcore=RAK11200) | ESP32 | add-on | 2.4GHz b/g/n | 4.2 | add-on |
+| [RAK11200](./rak-wireless/wisblock/core-module?rakcore=RAK11200) | ESP32 | add-on | 2.4GHz b/g/n | 4.2 | add-on |
-| [RAK11310](./rak/core-module?rakcore=RAK11310) | RP2040 | SX1262 | NO | NO | add-on |
+| [RAK11310](./rak-wireless/wisblock/core-module?rakcore=RAK11310) | RP2040 | SX1262 | NO | NO | add-on |
 
-[**Base Boards**](./rak/base-board/)<br/>
+[**Base Boards**](./rak-wireless/wisblock/base-board/)<br/>
-[RAK5005-O](./rak/base-board?rakbase=RAK5005-O)<br/>
+[RAK5005-O](./rak-wireless/wisblock/base-board?rakbase=RAK5005-O)<br/>
-[RAK19007](./rak/base-board?rakbase=RAK19007)<br/>
+[RAK19007](./rak-wireless/wisblock/base-board?rakbase=RAK19007)<br/>
-[RAK19003](./rak/base-board?rakbase=RAK19003)<br/>
+[RAK19003](./rak-wireless/wisblock/base-board?rakbase=RAK19003)<br/>
-[RAK19001](./rak/base-board?rakbase=RAK19001)<br/>
+[RAK19001](./rak-wireless/wisblock/base-board?rakbase=RAK19001)<br/>
 
-[**WisBlock Displays**](./rak/screens/)<br/>
+[**WisBlock Displays**](./rak-wireless/wisblock/screens/)<br/>
-[RAK1921](./rak/screens?rakscreens=OLED)<br/>
+[RAK1921](./rak-wireless/wisblock/screens?rakscreens=OLED)<br/>
-[RAK1400](./rak/screens?rakscreens=E-Ink)<br/>
+[RAK1400](./rak-wireless/wisblock/screens?rakscreens=E-Ink)<br/>
 
-[**WisBlock Peripherals**](./rak/peripherals/)<br/>
+[**WisBlock Peripherals**](./rak-wireless/wisblock/peripherals/)<br/>
-[RAK1910](./rak/peripherals?rakmodules=GPS) GPS<br/>
+[RAK1910](./rak-wireless/wisblock/peripherals?rakmodules=GPS) GPS<br/>
-[RAK12500](./rak/peripherals?rakmodules=GPS) GPS<br/>
+[RAK12500](./rak-wireless/wisblock/peripherals?rakmodules=GPS) GPS<br/>
-[RAK18001](./rak/peripherals?rakmodules=Buzzer) Buzzer<br/>
+[RAK18001](./rak-wireless/wisblock/peripherals?rakmodules=Buzzer) Buzzer<br/>
-[RAK13002](./rak/peripherals?rakmodules=IO) IO<br/>
+[RAK13002](./rak-wireless/wisblock/peripherals?rakmodules=IO) IO<br/>
 RAK14001 RGB LED<br/>
-[RAK12002](./rak/peripherals?rakmodules=RTC) RTC<br/>
+[RAK12002](./rak-wireless/wisblock/peripherals?rakmodules=RTC) RTC<br/>
-[RAK1901](./rak/peripherals?rakmodules=Sensors&sensors=RAK1901) Temperature and Humidity Sensor<br/>
+[RAK1901](./rak-wireless/wisblock/peripherals?rakmodules=Sensors&sensors=RAK1901) Temperature and Humidity Sensor<br/>
-[RAK1902](./rak/peripherals?rakmodules=Sensors&sensors=RAK1902) Barometric Pressure Sensor<br/>
+[RAK1902](./rak-wireless/wisblock/peripherals?rakmodules=Sensors&sensors=RAK1902) Barometric Pressure Sensor<br/>
-[RAK1906](./rak/peripherals?rakmodules=Sensors&sensors=RAK1906) Environment Sensor<br/>
+[RAK1906](./rak-wireless/wisblock/peripherals?rakmodules=Sensors&sensors=RAK1906) Environment Sensor<br/>
 RAK12013 Radar Sensor<br/>
 RAK13800 Ethernet Module<br/>
 
-### [LILYGO® T-Beam](./tbeam/)
+## LILYGO®
+
+### [T-Beam](./lilygo/tbeam/)
 
 Boards complete with GPS, 18650 battery holder, and optional screen.
 
 | Name                                            | MCU      | Radio             |     WiFi     | BT  | GPS |
-| :--------------------------------------- | :------- | :---------------- | :----------: | :-: | :-: |
+| :---------------------------------------------- | :------- | :---------------- | :----------: | :-: | :-: |
-| [T-Beam v0.7](./tbeam/?t-beam=0.7)       | ESP32    | SX1276            | 2.4GHz b/g/n | 4.2 | YES |
+| [T-Beam v0.7](./lilygo/tbeam/?t-beam=0.7)       | ESP32    | SX1276            | 2.4GHz b/g/n | 4.2 | YES |
-| [T-Beam v1.1](./tbeam/?t-beam=1.1)       | ESP32    | SX1276            | 2.4GHz b/g/n | 4.2 | YES |
+| [T-Beam v1.1](./lilygo/tbeam/?t-beam=1.1)       | ESP32    | SX1276            | 2.4GHz b/g/n | 4.2 | YES |
-| [T-Beam with M8N](./tbeam/?t-beam=m8n)   | ESP32    | SX1276<br/>SX1262 | 2.4GHz b/g/n | 4.2 | YES |
+| [T-Beam with M8N](./lilygo/tbeam/?t-beam=m8n)   | ESP32    | SX1276<br/>SX1262 | 2.4GHz b/g/n | 4.2 | YES |
-| [T-Beam S3-Core](./tbeam/?t-beam=s3core) | ESP32-S3 | SX1262            | 2.4GHz b/g/n | 5.0 | YES |
+| [T-Beam S3-Core](./lilygo/tbeam/?t-beam=s3core) | ESP32-S3 | SX1262            | 2.4GHz b/g/n | 5.0 | YES |
-| [T-BeamSUPREME](./tbeam/?t-beam=supreme) | ESP32-S3 | SX1262            | 2.4GHz b/g/n | 5.0 | YES |
+| [T-BeamSUPREME](./lilygo/tbeam/?t-beam=supreme) | ESP32-S3 | SX1262            | 2.4GHz b/g/n | 5.0 | YES |
 
-### [LILYGO® T-Echo](./techo/)
+### [T-Echo](./lilygo/techo/)
 
 All-in-one unit with E-Ink screen, GPS and battery in injection-molded case. Features the low-power nRF52840 for long battery life.
 
 | Name                      | MCU      | Radio  | WiFi | BT  | GPS |
-| :----------------- | :------- | :----- | :--: | :-: | :-: |
+| :------------------------ | :------- | :----- | :--: | :-: | :-: |
-| [T-Echo](./techo/) | nRF52840 | SX1262 |  NO  | 5.0 | YES |
+| [T-Echo](./lilygo/techo/) | nRF52840 | SX1262 |  NO  | 5.0 | YES |
 
-### [LILYGO® LoRa](./lora/)
+### [LoRa](./lilygo/lora/)
 
 Inexpensive basic ESP32-based boards.
 
 | Name                                              | MCU      | Radio                        |     WiFi     | BT  | GPS |
-| :----------------------------------------- | :------- | :--------------------------- | :----------: | :-: | :-: |
+| :------------------------------------------------ | :------- | :--------------------------- | :----------: | :-: | :-: |
-| [LoRa32 V1](./lora/?t-lora=v1)             | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V1](./lilygo/lora/?t-lora=v1)             | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
-| [LoRa32 V1.3](./lora/?t-lora=v1.3)         | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V1.3](./lilygo/lora/?t-lora=v1.3)         | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
-| [LoRa32 V2.0](./lora/?t-lora=v2.0)         | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.0](./lilygo/lora/?t-lora=v2.0)         | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
-| [LoRa32 V2.1-1.6](./lora/?t-lora=v2.1)     | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.1-1.6](./lilygo/lora/?t-lora=v2.1)     | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
-| [LoRa32 V2.1-1.8](./lora/?t-lora=v2.1-1.8) | ESP32    | SX1280                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.1-1.8](./lilygo/lora/?t-lora=v2.1-1.8) | ESP32    | SX1280                       | 2.4GHz b/g/n | 4.2 | NO  |
-| [LoRa32 T3-S3 V1.0](./lora/?t-lora=S3-v1)  | ESP32-S3 | SX1262<br/>SX1276<br/>SX1280 | 2.4GHz b/g/n | 5.0 | NO  |
+| [LoRa32 T3-S3 V1.0](./lilygo/lora/?t-lora=S3-v1)  | ESP32-S3 | SX1262<br/>SX1276<br/>SX1280 | 2.4GHz b/g/n | 5.0 | NO  |
 
-### [LILYGO® T-Deck](./tdeck/)
+### [T-Deck](./lilygo/tdeck/)
 
 Standalone device with screen and keyboard
 
 | Name                      | MCU         | Radio  | WiFi | BT  | GPS |
-| :----------------- | :---------- | :----- | :--: | :-: | :-: |
+| :------------------------ | :---------- | :----- | :--: | :-: | :-: |
-| [T-Deck](./tdeck/) | ESP32-S3FN8 | SX1262 | YES  | 5.0 | NO  |
+| [T-Deck](./lilygo/tdeck/) | ESP32-S3FN8 | SX1262 | YES  | 5.0 | NO  |
 
-### [LILYGO® T-Watch S3](./twatch/)
+### [T-Watch S3](./lilygo/twatch/)
 
 | Name                           | MCU      | Radio  | WiFi | BT  | GPS |
-| :---------------------- | :------- | :----- | :--: | :-: | :-: |
+| :----------------------------- | :------- | :----- | :--: | :-: | :-: |
-| [T-Watch S3](./twatch/) | ESP32-S3 | SX1262 | YES  | 5.0 | NO  |
+| [T-Watch S3](./lilygo/twatch/) | ESP32-S3 | SX1262 | YES  | 5.0 | NO  |
 
-### [HELTEC® LoRa 32](./heltec/)
+## HELTEC®
+
+### [LoRa 32](./heltec-automation/lora32/)
 
 Inexpensive basic ESP32-based boards.
 
 | Name                                                                                | MCU         | Radio  |     WiFi     | BT  | GPS |
-| :---------------------------------------------------------------- | :---------- | :----- | :----------: | :-: | :-: |
+| :---------------------------------------------------------------------------------- | :---------- | :----- | :----------: | :-: | :-: |
-| [LoRa32 V2.1](./heltec/?heltec=v2.1)                              | ESP32       | SX127x | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.1](./heltec-automation/lora32/?heltec=v2.1)                              | ESP32       | SX127x | 2.4GHz b/g/n | 4.2 | NO  |
-| [LoRa32 V3/3.1](./heltec/?heltec=v23)                             | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [LoRa32 V3/3.1](./heltec-automation/lora32/?heltec=v23)                             | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
-| [Wireless Stick Lite V3](./heltec/?heltec=Wireless+Stick+Lite+V3) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Wireless Stick Lite V3](./heltec-automation/lora32/?heltec=Wireless+Stick+Lite+V3) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
-| [Wireless Tracker](./heltec/?heltec=tracker)                      | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
+| [Wireless Tracker](./heltec-automation/lora32/?heltec=tracker)                      | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
-| [Wireless Paper](./heltec/?heltec=paper)                          | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Wireless Paper](./heltec-automation/lora32/?heltec=paper)                          | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
 
-### [Nano Series](./nano/)
+### [Plug & Play Sensors](./heltec-automation/sensor/)
+
+| Name                                      | MCU         | Radio  | WiFi         | BT  | GPS |
+| ----------------------------------------- | ----------- | ------ | ------------ | --- | --- |
+| [Capsule V3](./heltec-automation/sensor/) | ESP32-S3FN8 | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
+
+### [Vision Master](./heltec-automation/vision-master/)
+
+Versatile ESP32-S3-based boards E-Ink development boards.
+
+| Name                                                                               | MCU        | Radio  |     WiFi     | BT  | GPS |
+| :--------------------------------------------------------------------------------- | :--------- | :----- | :----------: | :-: | :-: |
+| [Vision Master E213](./heltec-automation/vision-master/?heltec=vision_master_e213) | ESP32-S3R8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Vision Master E290](./heltec-automation/vision-master/?heltec=vision_master_e290) | ESP32-S3R8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+| [Vision Master T190](./heltec-automation/vision-master/?heltec=vision_master_t190) | ESP32-S3R8 | SX1262 | 2.4GHz b/g/n | 5.0 | NO  |
+
+## [B&Q Consulting](./b-and-q-consulting/)
+
+### [Nano Series](./b-and-q-consulting/nano/)
 
 Portable and durable devices designed for Meshtastic.
 
 | Name                                                            | MCU         | Radio  |     WiFi     | BT  | GPS |
-| :------------------------------------------- | :---------- | :----- | :----------: | :-: | :-: |
+| :-------------------------------------------------------------- | :---------- | :----- | :----------: | :-: | :-: |
-| [Nano G2 Ultra](./nano/?nano-series=g2)      | NRF52840    | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
+| [Nano G2 Ultra](./b-and-q-consulting/nano/?nano-series=g2)      | NRF52840    | SX1262 | 2.4GHz b/g/n | 5.0 | YES |
-| [Nano G1 Explorer](./nano/?nano-series=g1-e) | ESP32 WROOM | SX1262 | 2.4GHz b/g/n | 4.2 | YES |
+| [Nano G1 Explorer](./b-and-q-consulting/nano/?nano-series=g1-e) | ESP32 WROOM | SX1262 | 2.4GHz b/g/n | 4.2 | YES |
-| [Nano G1](./nano/?nano-series=g1)            | ESP32 WROOM | SX1276 | 2.4GHz b/g/n | 4.2 | YES |
+| [Nano G1](./b-and-q-consulting/nano/?nano-series=g1)            | ESP32 WROOM | SX1276 | 2.4GHz b/g/n | 4.2 | YES |
 
-### [Station Series](./station-series/)
+### [Station Series](./b-and-q-consulting/station-series/)
 
 High power LoRa transceiver designed for Meshtastic Licensed HAM operation.
 
 | Name                                               | MCU              | Radio  |     WiFi     | BT  |   GPS    |
-| :------------------------------ | :--------------- | :----- | :----------: | :-: | :------: |
+| :------------------------------------------------- | :--------------- | :----- | :----------: | :-: | :------: |
-| [Station G1](./station-series/) | ESP32 WROOM      | SX1262 | 2.4GHz b/g/n | 4.2 | OPTIONAL |
+| [Station G1](./b-and-q-consulting/station-series/) | ESP32 WROOM      | SX1262 | 2.4GHz b/g/n | 4.2 | OPTIONAL |
-| [Station G2](./station-series/) | ESP32-S3 WROOM-1 | SX1262 | 2.4GHz b/g/n | 5.0 | OPTIONAL |
+| [Station G2](./b-and-q-consulting/station-series/) | ESP32-S3 WROOM-1 | SX1262 | 2.4GHz b/g/n | 5.0 | OPTIONAL |
 
-### [Raspberry Pi Pico](./raspberry-pi/)
+## [Raspberry Pi](./raspberrypi/)
+
+### [Raspberry Pi Pico](./raspberrypi/pico/)
 
 Fast versatile boards using the RP2040.
 
 | Name                                    | MCU    | Radio  |     WiFi     |      BT       | GPS |
-| :----------------------------------- | :----- | :----- | :----------: | :-----------: | :-: |
+| :-------------------------------------- | :----- | :----- | :----------: | :-----------: | :-: |
-| [Raspberry Pi Pico](./raspberry-pi/) | RP2040 | SX1262 | 2.4GHz b/g/n | not supported | NO  |
+| [Raspberry Pi Pico](./raspberrypi/pico) | RP2040 | SX1262 | 2.4GHz b/g/n | not supported | NO  |
 
-[**Pico Peripherals**](./raspberry-pi/peripherals/)<br/>
+[**Pico Peripherals**](./raspberrypi/pico/peripherals/)<br/>
 SSD1306 OLED Display<br/>
 SH1106 OLED Display<br/>
 CardKB Keyboard<br/>
 
-### [CanaryOne](./canary)
+### [Raspberry Pi Zero/Zero2/3/4/400/5](./linux-native-hardware/)
+
+Meshtastic offers support for Raspberry Pi devices through our Linux native platform, meshtasticd. For full information, please see our [Linux Native Hardware](./linux-native-hardware/) documentation.
+
+## Seeed Studio
+
+### SenseCap
+
+| Name                                                          | MCU           | Radio  | WiFi | BT  | GPS |
+| ------------------------------------------------------------- | ------------- | ------ | ---- | --- | --- |
+| [Card Tracker T1000-E](./seeed-studio/sensecap/card-tracker/) | nRF52840      | LR1110 | NO   | 5.1 | YES |
+| [SenseCAP Indicator](./seeed-studio/) (coming soon)           | ESP32, RP2040 | -      | -    | -   | -   |
+
+### [Seeed Wio-WM1110](./seeed-studio/wm1110)
+
+nRF52840-based development boards with GPS, and multiple ports to attach sensors.
+
+| Name                                                                      | MCU      | Radio  | WiFi | BT  | GPS |
+| :------------------------------------------------------------------------ | :------- | :----- | :--: | :-: | :-: |
+| [Seeed Wio-WM1110 Dev Kit](./seeed-studio/wm1110?wm1110=wio-sdk-wm1110)   | nRF52840 | LR1110 | YES  | 5.3 | YES |
+| [Seeed Wio Tracker 1110](./seeed-studio/wm1110?wm1110=wio-tracker-wm1110) | nRF52840 | LR1110 | YES  | 5.3 | YES |
+
+## [CanaryOne](./canary)
 
 Complete solution with battery, screen, case, and antenna. Ships pre-flashed with latest Meshtastic firmware.
 
@@ -161,7 +210,7 @@ Complete solution with battery, screen, case, and antenna. Ships pre-flashed wit
 | :-------------------- | :------- | :----- | :--: | :-: | :-: |
 | [CanaryOne](./canary) | nRF52840 | SX1262 |  NO  | 5.0 | YES |
 
-### [unPhone](./unPhone)
+## [unPhone](./unPhone)
 
 All-in-one development device with LoRa, WiFi, BT, touchscreen, accelerometer, gyroscop, vibration motor, LiPo battery and more!
 
@@ -169,12 +218,10 @@ All-in-one development device with LoRa, WiFi, BT, touchscreen, accelerometer, g
 | :------------------- | :--------------- | :----- | :--: | :-: | :-: |
 | [unPhone](./unPhone) | ESP32-S3-WROOM-1 | RF950W | YES  | 5.0 | NO  |
 
-### [Seeed Wio-WM1110](./seeed-wm1110)
+## [Chatter](./chatter)
 
-nRF52840-based development boards with GPS, and multiple ports to attach sensors.
+DIY kit with ESP32, LoRa chip, and optional GPS. Designed for STEM education.
 
 | Name                 | MCU   | Radio  | WiFi | BT  | GPS |
-| :--------------------------------------------------------- | :------- | :----- | :--: | :-: | :-: |
+| :------------------- | :---- | :----- | :--: | :-: | :-: |
-| [Seeed Wio-WM1110 Dev Kit](./seeed-wm1110?wio-sdk-wm1110)   | nRF52840 | LR1110 | YES  | 5.3 | YES |
+| [Chatter](./chatter) | ESP32 | LLCC68 | YES  | 4.2 | No  |
-| [Seeed Wio Tracker 1110](./seeed-wm1110?wio-tracker-wm1110) | nRF52840 | LR1110 | YES  | 5.3 | YES |
-

docs/hardware/devices/lilygo/index.mdx

@@ -0,0 +1,53 @@
+---
+id: lilygo
+title: LILYGO® Devices
+sidebar_label: LILYGO®
+sidebar_position: 2
+---
+
+## [T-Beam](./tbeam/)
+
+Boards complete with GPS, 18650 battery holder, and optional screen.
+
+| Name                                     | MCU      | Radio             |     WiFi     | BT  | GPS |
+| :--------------------------------------- | :------- | :---------------- | :----------: | :-: | :-: |
+| [T-Beam v0.7](./tbeam/?t-beam=0.7)       | ESP32    | SX1276            | 2.4GHz b/g/n | 4.2 | YES |
+| [T-Beam v1.1](./tbeam/?t-beam=1.1)       | ESP32    | SX1276            | 2.4GHz b/g/n | 4.2 | YES |
+| [T-Beam with M8N](./tbeam/?t-beam=m8n)   | ESP32    | SX1276<br/>SX1262 | 2.4GHz b/g/n | 4.2 | YES |
+| [T-Beam S3-Core](./tbeam/?t-beam=s3core) | ESP32-S3 | SX1262            | 2.4GHz b/g/n | 5.0 | YES |
+| [T-BeamSUPREME](./tbeam/?t-beam=supreme) | ESP32-S3 | SX1262            | 2.4GHz b/g/n | 5.0 | YES |
+
+## [T-Echo](./techo/)
+
+All-in-one unit with E-Ink screen, GPS and battery in injection-molded case. Features the low-power nRF52840 for long battery life.
+
+| Name               | MCU      | Radio  | WiFi | BT  | GPS |
+| :----------------- | :------- | :----- | :--: | :-: | :-: |
+| [T-Echo](./techo/) | nRF52840 | SX1262 |  NO  | 5.0 | YES |
+
+## [LoRa32](./lora/)
+
+Inexpensive basic ESP32-based boards.
+
+| Name                                       | MCU      | Radio                        |     WiFi     | BT  | GPS |
+| :----------------------------------------- | :------- | :--------------------------- | :----------: | :-: | :-: |
+| [LoRa32 V1](./lora/?t-lora=v1)             | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V1.3](./lora/?t-lora=v1.3)         | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.0](./lora/?t-lora=v2.0)         | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.1-1.6](./lora/?t-lora=v2.1)     | ESP32    | SX127x                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 V2.1-1.8](./lora/?t-lora=v2.1-1.8) | ESP32    | SX1280                       | 2.4GHz b/g/n | 4.2 | NO  |
+| [LoRa32 T3-S3 V1.0](./lora/?t-lora=S3-v1)  | ESP32-S3 | SX1262<br/>SX1276<br/>SX1280 | 2.4GHz b/g/n | 5.0 | NO  |
+
+## [T-Deck](./tdeck/)
+
+Standalone device with screen and keyboard
+
+| Name               | MCU         | Radio  | WiFi | BT  | GPS |
+| :----------------- | :---------- | :----- | :--: | :-: | :-: |
+| [T-Deck](./tdeck/) | ESP32-S3FN8 | SX1262 | YES  | 5.0 | NO  |
+
+## [T-Watch S3](./twatch/)
+
+| Name                    | MCU      | Radio  | WiFi | BT  | GPS |
+| :---------------------- | :------- | :----- | :--: | :-: | :-: |
+| [T-Watch S3](./twatch/) | ESP32-S3 | SX1262 | YES  | 5.0 | NO  |

docs/hardware/devices/lilygo/lora/index.mdx

@@ -1,8 +1,8 @@
 ---
 id: lora
 title: LILYGO® TTGO Lora Devices
-sidebar_label: LILYGO® Lora
+sidebar_label: LoRa32
-sidebar_position: 4
+sidebar_position: 1
 ---
 
 import Tabs from "@theme/Tabs";
@@ -25,6 +25,7 @@ values={[
 <TabItem value="v1">
 
 ## Lora v1
+
 :::warning
 Not recommended with a battery! These boards contain the wrong component in the LiPo battery charging circuit allowing the battery to be overcharged.
 :::

docs/hardware/devices/lilygo/tbeam/index.mdx

@@ -1,7 +1,7 @@
 ---
 id: tbeam
 title: LILYGO® TTGO T-Beam Devices
-sidebar_label: LILYGO® T-Beam
+sidebar_label: T-Beam
 sidebar_position: 2
 ---
 

docs/hardware/devices/lilygo/tbeam/screens.mdx

@@ -19,6 +19,7 @@ To attach the screen:
 ![Connecting the OLED screen to a T-Beam](/img/hardware/t-beam-screen.webp)
 
 ### Resources
+
 - Purchase Links:
   - US
     - [Rokland](https://store.rokland.com/products/lilygo-ttgo-0-96-inch-oled-white-color-text-display-module-l206-for-t-beam-and-t-sim)

docs/hardware/devices/lilygo/tdeck/index.mdx

@@ -1,8 +1,8 @@
 ---
 id: tdeck
 title: LILYGO® T-Deck
-sidebar_label: LILYGO® T-Deck
+sidebar_label: T-Deck
-sidebar_position: 5
+sidebar_position: 4
 ---
 
 The T-Deck is a compact device featuring a 2.8-inch IPS LCD touch screen with a resolution of 320x240 pixels, integrated with a small keyboard, trackball, microphone and speaker running on an ESP32-S3 dual-core processor.
@@ -32,7 +32,7 @@ The T-Deck is a compact device featuring a 2.8-inch IPS LCD touch screen with a
 ## Keyboard Shortcuts
 
 | Shortcut          | Function                                            |
-|-------------------|-----------------------------------------------------|
+| ----------------- | --------------------------------------------------- |
 | `alt` & `b`       | Toggle keyboard backlight on/off.                   |
 | `alt` & `c`       | Toggle modifier function. `Fn` displayed on screen. |
 | `alt` & `c` + `m` | Disable/Enable notifications.                       |

docs/hardware/devices/lilygo/techo/buttons.mdx

@@ -10,15 +10,15 @@ sidebar_position: 1
 - **Capacitive Touch Button (Top):**<br />
   - **Touch:**
     - Update the display
-    - *(at screensaver)* Wake the display.
+    - _(at screensaver)_ Wake the display.
 - **Reset Button (Button 1):**
   - **Single press:** Power-on / reboot.
   - **Double press:** Enter bootloader mode, for firmware update.
 - **Program Button (Button 2):**
   - **Single press:**
     - Display next page of information.
-    - *(at screensaver)* Wake the display.
+    - _(at screensaver)_ Wake the display.
-    - *(when off)* Enter bootloader mode, for firmware update.
+    - _(when off)_ Enter bootloader mode, for firmware update.
   - **Double press:** Send an "adhoc ping": announce device to network.
   - ** 3x press:** Enable / disable GPS.
   - ** 4x press:** Enable / disable display's backlight.

docs/hardware/devices/lilygo/techo/index.mdx

@@ -1,7 +1,7 @@
 ---
 id: techo
 title: LILYGO® TTGO T-Echo devices
-sidebar_label: LILYGO® T-Echo
+sidebar_label: T-Echo
 sidebar_position: 3
 ---
 

docs/hardware/devices/lilygo/twatch/index.mdx

@@ -1,8 +1,8 @@
 ---
 id: twatch
 title: LILYGO® T-Watch
-sidebar_label: LILYGO® T-Watch
+sidebar_label: T-Watch
-sidebar_position: 6
+sidebar_position: 5
 ---
 
 The T-Watch S3 is a compact wearable device featuring a 1.54-inch IPS LCD touch screen with a resolution of 240x240 pixels. It includes haptic feedback, an integrated microphone, speaker, real-time clock, and a three-axis accelerometer.

docs/hardware/devices/rak-wireless/index.mdx

@@ -0,0 +1,44 @@
+---
+id: rak-wireless
+title: RAK Wireless Devices
+sidebar_label: RAK®
+sidebar_position: 1
+---
+
+## [RAK Wisblock](./wisblock/)
+
+Modular hardware system with Base, Core and Peripheral modules including the low-power and solar ready nRF52840-based Meshtastic Starter Kit (19007 & 4631).
+
+### [**WisBlock Core Modules**](./wisblock/core-module/)
+
+| Name                                                | MCU      | Radio  |     WiFi     | BT  |  GPS   |
+| :-------------------------------------------------- | :------- | :----- | :----------: | :-: | :----: |
+| [RAK4631](./wisblock/core-module?rakcore=RAK4631)   | nRF52840 | SX1262 |      NO      | 5.0 | add-on |
+| [RAK11200](./wisblock/core-module?rakcore=RAK11200) | ESP32    | add-on | 2.4GHz b/g/n | 4.2 | add-on |
+| [RAK11310](./wisblock/core-module?rakcore=RAK11310) | RP2040   | SX1262 |      NO      | NO  | add-on |
+
+### [**Base Boards**](./wisblock/base-board/)
+
+[RAK5005-O](./wisblock/base-board?rakbase=RAK5005-O)<br/>
+[RAK19007](./wisblock/base-board?rakbase=RAK19007)<br/>
+[RAK19003](./wisblock/base-board?rakbase=RAK19003)<br/>
+[RAK19001](./wisblock/base-board?rakbase=RAK19001)<br/>
+
+### [**WisBlock Displays**](./wisblock/screens/)
+
+[RAK1921](./wisblock/screens?rakscreens=OLED)<br/>
+[RAK1400](./wisblock/screens?rakscreens=E-Ink)<br/>
+
+### [**WisBlock Peripherals**](./wisblock/peripherals/)
+
+[RAK1910](./wisblock/peripherals?rakmodules=GPS) GPS<br/>
+[RAK12500](./wisblock/peripherals?rakmodules=GPS) GPS<br/>
+[RAK18001](./wisblock/peripherals?rakmodules=Buzzer) Buzzer<br/>
+[RAK13002](./wisblock/peripherals?rakmodules=IO) IO<br/>
+RAK14001 RGB LED<br/>
+[RAK12002](./wisblock/peripherals?rakmodules=RTC) RTC<br/>
+[RAK1901](./wisblock/peripherals?rakmodules=Sensors&sensors=RAK1901) Temperature and Humidity Sensor<br/>
+[RAK1902](./wisblock/peripherals?rakmodules=Sensors&sensors=RAK1902) Barometric Pressure Sensor<br/>
+[RAK1906](./wisblock/peripherals?rakmodules=Sensors&sensors=RAK1906) Environment Sensor<br/>
+RAK12013 Radar Sensor<br/>
+RAK13800 Ethernet Module<br/>

docs/hardware/devices/rak-wireless/wisblock/base-boards.mdx

@@ -8,7 +8,7 @@ sidebar_position: 1
 import Tabs from "@theme/Tabs";
 import TabItem from "@theme/TabItem";
 
-Operation requires both a base board and a [core module](/docs/hardware/devices/rak/core-module).
+Operation requires both a base board and a [core module](../core-module/).
 
 <Tabs
 groupId="rakbase board"
@@ -81,6 +81,7 @@ Further information on the RAK5005-O can be found on the [RAK Documentation Cent
 Further information on the RAK19007 can be found on the [RAK Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK19007/Overview/#product-description).
 
 ### Resources
+
 - Purchase Links:
   - US
     - [Rokland](https://store.rokland.com/products/rak-wireless-wisblock-base-board-2nd-gen-rak19007-ver-b-pid-110082)
@@ -112,6 +113,7 @@ Further information on the RAK19007 can be found on the [RAK Documentation Cente
 Further information on the RAK19003 can be found on the [RAK Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK19003/Overview/#product-description)
 
 ### Resources
+
 - Purchase Links:
   - US
     - [Rokland](https://store.rokland.com/products/rak-wireless-wisblock-mini-base-board-rak19003-ver-b-pid-306024)
@@ -151,12 +153,12 @@ Further information on the RAK19003 can be found on the [RAK Documentation Cente
 Further information on the RAK19001 can be found on the [RAK Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK19001/Overview/#product-description).
 
 ### Resources
+
 - Purchase Links:
   - US
     - [Rokland](https://store.rokland.com/products/rak-wireless-wisblock-dual-io-base-board-rak19001-pid-110081)
   - International
     - [RAK Wireless](https://store.rakwireless.com/products/wisblock-base?variant=42441631924422)
 
-
  </TabItem>
  </Tabs>

docs/hardware/devices/rak-wireless/wisblock/core-modules.mdx

@@ -62,7 +62,6 @@ Please be aware of the difference between the RAK4631 (Arduino bootloader) and t
   style={{ zoom: "50%" }}
 />
 
-
 ### GPIO
 
 :::caution Note

docs/hardware/devices/rak-wireless/wisblock/index.mdx

@@ -0,0 +1,32 @@
+---
+id: wisblock
+title: RAK WisBlock Devices
+sidebar_label: WisBlock
+sidebar_position: 1
+---
+
+import Tabs from "@theme/Tabs";
+import TabItem from "@theme/TabItem";
+
+The RAK WisBlock is a modular hardware system that can be used to build Meshtastic devices.
+
+RAK Wireless currently sells a [Meshtastic Starter kit](https://store.rakwireless.com/products/wisblock-meshtastic-starter-kit) that has the minimum you need to get started.
+
+If you wish to purchase parts separately, you will need a [WisBlock Base Board](./base-board) and a [WisBlock Core Module](./core-module). Please ensure you choose the correct operating frequency for your country when purchasing.
+
+You can optionally purchase peripherals such as a GPS module, Screen, Sensor, or other various modules.
+
+Please see the RAK documentation for the correct way to connect your hardware to the baseboard to ensure that you do not damage the device.
+
+## Resources
+
+- RAK's Wisblock [Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock)
+- RAK's [GitHub Page](https://github.com/RAKWireless/WisBlock) for the WisBlock
+- RAK's [WisBlock IO Pin Mapping Tool](https://docs.rakwireless.com/Knowledge-Hub/Pin-Mapper/).
+- This tool helps properly map your WisBlock modules by identifying the compatible pins and their possible conflicts. Be sure to reference the RAK4631 [variant.h](https://github.com/meshtastic/firmware/blob/master/variants/rak4631/variant.h) to cross-reference potential conflicts to Meshtastic's firmware pin definitions.
+- Purchase links
+- See purchase links under specific base boards, core modules, and peripherals
+- China RAK Direct [RAK Wireless Starter Kit w/ Gen2 Base board](https://store.rakwireless.com/products/wisblock-meshtastic-starter-kit)
+- US Distributor Rokland [RAK Wireless Starter Kit w/ Gen2 Base board](https://store.rokland.com/products/rak-wireless-wisblock-meshtastic-starter-kit)
+- US Distributor Rokland [RAK Wireless Starter Kit w/ Gen1 Base board](https://store.rokland.com/products/rakwireless-meshtastic-starter-kit-alternative-with-rak5005-o-base)
+- UK/EU Distributor ConnectedThings [RAK Wireless Starter Kit w/ Gen2 Base board](https://connectedthings.store/gb/meshtastic/rak-wisblock-meshtastic-starter-kit.html)

docs/hardware/devices/rak-wireless/wisblock/peripherals.mdx

@@ -26,23 +26,23 @@ values={[
 
 Any tactile momemtary push button is compatible as long as it is wired to the correct pins, here's a sample of a [Push Button](https://a.co/d/bPhhTxm)
 
-
 The button is recommended to be used on the following base board's exposed pins or slots :
 
 - RAK19007 on AIN1 (Pin 31) - See supporting instructions [Here](https://store.rokland.com/pages/adding-a-user-button-rak19007)
 - RAK19001 on IO5 (Pin 37)
 
 ### Wiring
+
 One side of the switch should be on GND and the other on the recommended Pin per your baseboard. The pin must be configured on the node using the app, webclient or CLI.
 
 ### Resources
+
 For more information on the User Button functionality refer to
+
 - [RAK WisBlock Hardware Buttons](https://meshtastic.org/docs/hardware/devices/rak/buttons/)
 
 </TabItem>
 
-
-
 <TabItem value="GPS">
 
 ## GPS Modules
@@ -75,6 +75,7 @@ The RAK1910 is supported on the following base boards & slots:
 - RAK19001 on slot F
 
 ### Resources
+
 - RAK Documentation Center
   - [RAK12500](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK12500/Overview/#product-description)
   - [RAK1910](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK1910/Overview/#product-description)
@@ -94,6 +95,7 @@ The RAK1910 is supported on the following base boards & slots:
 The [RAK18001 Buzzer Module](https://store.rakwireless.com/products/wisblock-buzzer-module-rak18001) is currently being tested for integration with the External Notifications plugin. There is currently a known conflict with buzzer if the module is placed in Slot D, although other slots should work.
 
 ### Resources
+
 - [RAK Documentation Center RAK18001](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK18001/Overview/#product-description)
 - Purchase Links:
   - International
@@ -116,6 +118,7 @@ The [RAK13002 IO Module](https://store.rakwireless.com/collections/wisblock-inte
 There is development activity in progress to get sensors such as this added to the Meshtastic Core.
 
 ### Resources
+
 - [RAK Documentation Center RAK13002](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK13002/Overview)
 - Purchase Links:
   - US
@@ -154,6 +157,7 @@ The [RAK1906 Environment Sensor](https://store.rakwireless.com/products/rak1906-
 - Air Quality measurement
 
 #### Resources
+
 - RAK Documentation Center
   - [RAK1901](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK1901/Overview/#product-description)
   - [RAK1902](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK1902/Overview/#product-description)
@@ -176,6 +180,7 @@ The [RAK1906 Environment Sensor](https://store.rakwireless.com/products/rak1906-
 The [RAK12002 WisBlock RTC Module](https://store.rakwireless.com/products/rtc-module-rak12002) is a real-time-clock with a supercapacitor backup, allowing a node to maintain the correct time across reboots and for up to seven days without power. It operates on a crystal oscilator and communicates via the i2c interface. The module can be inserted into slots A, B or C (some users have reported issues with slot D) and is plug and play - no settings are required.
 
 ### Resources
+
 - [RAK Documentation Center RAK12002](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK12002/Overview/)
 - Purchase Links:
   - US

docs/hardware/devices/rak-wireless/wisblock/screens.mdx

@@ -33,6 +33,7 @@ Similar modules are widely available from other suppliers, but do check the boar
 If pin ordering on the OLED board are swapped, there are some tricks to allow either reconfiguring the pins of the OLED via soldered jumpers, or by carefully soldering wire for those pins that are out-of-sequence. The final option is to use longer wires between the board and display, which permits re-ordering the wires as required.
 
 ### Resources
+
 - [RAK Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK1921/Overview/#product-description)
 - Purchase Links:
 - US
@@ -56,8 +57,8 @@ The [RAK1400 EPD module](https://store.rakwireless.com/products/wisblock-epd-mod
 
 Please note only the white-black display is supported at this time, the white-black-red display may work, but is not supported.
 
-
 ### Resources
+
 - Firmware for 5005 with RAK14000 e-paper: [`firmware-rak4631_eink-X.X.X.xxxxxxx.uf2`](/downloads)
 - [RAK Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK14000/Overview/#product-description)
 - Purchase Links:

docs/hardware/devices/rak/index.mdx

@@ -1,32 +0,0 @@
----
-id: wisBlock
-title: RAK WisBlock Devices
-sidebar_label: RAK WisBlock
-sidebar_position: 1
----
-
-import Tabs from "@theme/Tabs";
-import TabItem from "@theme/TabItem";
-
-The RAK WisBlock is a modular hardware system that can be used to build Meshtastic devices.
-
-RAK Wireless currently sells a [Meshtastic Starter kit](https://store.rakwireless.com/products/wisblock-meshtastic-starter-kit) that has the minimum you need to get started.
-
-If you wish to purchase parts separately, you will need a [WisBlock Base Board](/docs/hardware/devices/rak/base-board) and a [WisBlock Core Module](/docs/hardware/devices/rak/core-module). Please ensure you choose the correct operating frequency for your country when purchasing.
-
-You can optionally purchase peripherals such as a GPS module, Screen, Sensor, or other various modules.
-
-Please see the RAK documentation for the correct way to connect your hardware to the baseboard to ensure that you do not damage the device.
-
-## Resources
-
-- RAK's Wisblock [Documentation Center](https://docs.rakwireless.com/Product-Categories/WisBlock)
-- RAK's [GitHub Page](https://github.com/RAKWireless/WisBlock) for the WisBlock
-- RAK's [WisBlock IO Pin Mapping Tool](https://docs.rakwireless.com/Knowledge-Hub/Pin-Mapper/).
-  - This tool helps properly map your WisBlock modules by identifying the compatible pins and their possible conflicts. Be sure to reference the RAK4631 [variant.h](https://github.com/meshtastic/firmware/blob/master/variants/rak4631/variant.h) to cross-reference potential conflicts to Meshtastic's firmware pin definitions.
-- Purchase links
-  - See purchase links under specific base boards, core modules, and peripherals
-  - China RAK Direct [RAK Wireless Starter Kit w/ Gen2 Base board](https://store.rakwireless.com/products/wisblock-meshtastic-starter-kit)
-  - US Distributor Rokland [RAK Wireless Starter Kit w/ Gen2 Base board](https://store.rokland.com/products/rak-wireless-wisblock-meshtastic-starter-kit)
-  - US Distributor Rokland [RAK Wireless Starter Kit w/ Gen1 Base board](https://store.rokland.com/products/rakwireless-meshtastic-starter-kit-alternative-with-rak5005-o-base)
-  - UK/EU Distributor ConnectedThings [RAK Wireless Starter Kit w/ Gen2 Base board](https://connectedthings.store/gb/meshtastic/rak-wisblock-meshtastic-starter-kit.html)

docs/hardware/devices/raspberrypi/index.mdx

@@ -0,0 +1,18 @@
+---
+id: raspberry-pi
+title: Raspberry Pi
+sidebar_label: Raspberry Pi
+sidebar_position: 5
+---
+
+### [Raspberry Pi Pico](./pico/)
+
+Fast versatile boards using the RP2040.
+
+| Name                         | MCU    | Radio  |     WiFi     |      BT       | GPS |
+| :--------------------------- | :----- | :----- | :----------: | :-----------: | :-: |
+| [Raspberry Pi Pico](./pico/) | RP2040 | SX1262 | 2.4GHz b/g/n | not supported | NO  |
+
+### [Raspberry Pi Zero/Zero2/3/4/400/5](/docs/hardware/devices/linux-native-hardware/)
+
+Meshtastic offers support for Raspberry Pi devices through our Linux native platform, meshtasticd. For full information, please see our [Linux Native Hardware](/docs/hardware/devices/linux-native-hardware/) documentation.

docs/hardware/devices/raspberrypi/pico/index.mdx

@@ -1,8 +1,8 @@
 ---
-id: raspberry-pi
+id: raspberry-pi-pico
 title: Raspberry Pi Pico
 sidebar_label: Raspberry Pi Pico
-sidebar_position: 10
+sidebar_position: 1
 ---
 
 import Tabs from "@theme/Tabs";

docs/hardware/devices/seeed-studio/index.mdx

@@ -0,0 +1,24 @@
+---
+id: seeed-studios
+title: Seeed Studio
+sidebar_label: Seeed Studio
+sidebar_position: 6
+---
+
+Seeed Studio is a tech company focused on Edge AI and IoT. With the mission of "making technology accessible for all", Seeed Studio has been embracing open source since DAY 1. Seeed works closely with the Meshtastic community to bring easy-to-use, affordable products to community members. By listening to the voices, communicating and collaborating closely with innovators in this community, iterations of products and new services are brought to life.
+
+### SenseCap
+
+| Name                                             | MCU           | Radio  | WiFi | BT  | GPS |
+| ------------------------------------------------ | ------------- | ------ | ---- | --- | --- |
+| [Card Tracker T1000-E](./sensecap/card-tracker/) | nRF52840      | LR1110 | NO   | 5.1 | YES |
+| [SenseCAP Indicator](#) (coming soon)            | ESP32, RP2040 | -      | -    | -   | -   |
+
+### [Wio-WM1110](./wm1110)
+
+nRF52840-based development boards with GPS, and multiple ports to attach sensors.
+
+| Name                                                         | MCU      | Radio  | WiFi | BT  | GPS |
+| :----------------------------------------------------------- | :------- | :----- | :--: | :-: | :-: |
+| [Seeed Wio-WM1110 Dev Kit](./wm1110?wm1110=wio-sdk-wm1110)   | nRF52840 | LR1110 | YES  | 5.3 | YES |
+| [Seeed Wio Tracker 1110](./wm1110?wm1110=wio-tracker-wm1110) | nRF52840 | LR1110 | YES  | 5.3 | YES |

docs/hardware/devices/seeed-studio/sensecap/card-tracker.mdx

@@ -0,0 +1,41 @@
+---
+id: card-tracker
+title: SenseCAP Card Tracker T1000-E
+sidebar_label: Card Tracker T1000-E
+sidebar_position: 2
+---
+
+SenseCAP T1000-E is a high-performance tracker designed for Meshtastic. As small as a credit card, effortlessly fitting in your pocket or attaching to your assets. It embeds Semtech's LR1110, Nordic's nRF52840, and Mediatek's AG3335 GPS module, providing Meshtastic users with a high-precision, low-power positioning and communication solution.
+
+### Specifications
+
+- **MCU**
+  - Nordic nRF52840 (WiFi & Bluetooth)
+- **LoRa Transceiver**
+  - Semtech LR1110
+- **Frequency options**
+  - 865-928 MHz
+- **Navigation Module**
+  - Mediatek AG3335 GPS chip
+- **Battery Capacity**
+  - Rechargeable lithium battery, 700mAh
+- **Charging**
+  - USB magnetic charging cable
+
+### Features
+
+- **Button and Buzzer**: For user interaction and alerts.
+- **Pogo Pins**: Four pins for USB, DFU, serial logging, and charging.
+- **Rugged Build**: IP65 rated, waterproof and durable for various environments.
+
+### Resources
+
+- Firmware file: `firmware-tracker-t1000-e-X.X.X.xxxxxxx.bin`
+- Purchase Links:
+  - International
+    - [Seeed Studio](https://www.seeedstudio.com/SenseCAP-Card-Tracker-T1000-E-for-Meshtastic-p-5913.html)
+
+#### Images
+
+![SenseCAP Card Tracker T1000-E for Meshtastic](/img/hardware/seeed/card_tracker.webp)
+![SenseCAP Card Tracker T1000-E Dimensions](/img/hardware/seeed/T1000-E.webp)

docs/hardware/devices/seeed-studio/sensecap/index.mdx

@@ -0,0 +1,11 @@
+---
+id: seeed-sensecap
+title: Seeed SenseCAP
+sidebar_label: SenseCAP
+sidebar_position: 1
+---
+
+| Name                                              | MCU           | Radio  | WiFi | BT  | GPS |
+| ------------------------------------------------- | ------------- | ------ | ---- | --- | --- |
+| [Card Tracker T1000-E](../sensecap/card-tracker/) | nRF52840      | LR1110 | NO   | 5.1 | YES |
+| [SenseCAP Indicator](#) (coming soon)             | ESP32, RP2040 | -      | -    | -   | -   |

docs/hardware/devices/seeed-studio/wm1110/index.mdx

@@ -1,14 +1,13 @@
 ---
 id: seeed-wm1110
 title: Seeed Wio-WM1100
-sidebar_label: Seeed Wio-WM1100
+sidebar_label: Wio-WM1100
-sidebar_position: 15
+sidebar_position: 1
 ---
 
 import Tabs from "@theme/Tabs";
 import TabItem from "@theme/TabItem";
 
-
 <Tabs
 groupId="wm1110"
 queryString="wm1110"
@@ -26,9 +25,8 @@ values={[
 The LR1110 GNSS functionality does not yet work. Seeed recommends at Grove - GPS (Air530).
 :::
 
-
 - **MCU**
-  - Nordic nRF52840 (WiFi & Bluetooth)
+  - Nordic nRF52840
 - **LoRa Transceiver**
   - Semtech LR1110
 - **Frequency options**
@@ -36,7 +34,7 @@ The LR1110 GNSS functionality does not yet work. Seeed recommends at Grove - GPS
   - 915 MHz
   - 923 MHz
 - **Navigation Module**
-  - Semtech LR1110
+  - Grove GPS Air530 (Supports GPS, Beidou, Glonass, Galileo, QZSS, SBAS)
 - **Connectors**
   - USB-C
   - LoRa Antenna: SMA antenna connector and U.FL/IPEX
@@ -48,7 +46,6 @@ The LR1110 GNSS functionality does not yet work. Seeed recommends at Grove - GPS
   - Solar Panel
   - SWDIO
 
-
 ### Features
 
 - Temperature and Humidity Sensor (SHT41)
@@ -88,7 +85,6 @@ The LR1110 GNSS functionality does not yet work. Seeed recommends at Grove - GPS
   - GNSS Antenna: on-board and U.FL/IPEX
   - Grove connectors: ADC x1, I2C x1, UART x1, Digital x3
 
-
 ### Features
 
 - Temperature and Humidity Sensor (SHT41)

vercel.json

@@ -72,6 +72,54 @@
     {
       "source": "/docs/",
       "destination": "/docs/introduction/"
+    },
+    {
+      "source": "/docs/hardware/devices/rak/:path*/",
+      "destination": "/docs/hardware/devices/rak-wireless/wisblock/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/lora/:path*/",
+      "destination": "/docs/hardware/devices/lilygo/lora/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/tbeam/:path*/",
+      "destination": "/docs/hardware/devices/lilygo/tbeam/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/techo/:path*/",
+      "destination": "/docs/hardware/devices/lily/techo/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/tdeck/:path*/",
+      "destination": "/docs/hardware/devices/lilygo/tdeck/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/twatch/:path*/",
+      "destination": "/docs/hardware/devices/lilygo/twatch/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/heltec/:path*/",
+      "destination": "/docs/hardware/devices/heltec-automation/lora32/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/heltec-sensor/:path*/",
+      "destination": "/docs/hardware/devices/heltec-automation/sensor/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/nano/:path*/",
+      "destination": "/docs/hardware/devices/b-and-q-consulting/nano/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/station-series/:path*/",
+      "destination": "/docs/hardware/devices/b-and-q-consulting/station-series/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/raspberry-pi/:path*/",
+      "destination": "/docs/hardware/devices/raspberrypi/pico/:path*"
+    },
+    {
+      "source": "/docs/hardware/devices/seeed-wm1110/:path*/",
+      "destination": "/docs/hardware/devices/seeed-studio/wm1110/:path*"
     }
   ]
 }