---
id: wifi
title: WiFi Settings
sidebar_label: WiFi
---

import Tabs from '@theme/Tabs';
import TabItem from '@theme/TabItem';

:::info
Enabling WiFi will disable bluetooth. Only one method will work at a time.
:::

## Overview

The ESP32 based devices have the ability to connect to WiFi as a client and also are able to create a software based access point (SoftAP). WiFi can be configured in either mode with the settings below. You can [force the device to boot into SoftAP mode](#software-access-point) by rebooting the device with the program switch depressed. If forced into AP mode, it will revert to previous settings after a reboot.

:::note
The device can be either a WiFi client or a software access point. It **cannot** operate as both at the same time.
:::

:::info
The first time your device restarts after enabling the WiFi access point, it will take an additional 20-30 seconds to boot. This is to generate self-signed SSL keys. The keys will be saved for future reuse.
:::

## Settings

|    Setting    | Acceptable Values | Default |
| :-----------: | :---------------: | :-----: |
| wifi_ap_mode  |  `true`, `false`  | `false` |
| wifi_password |      string       |  `""`   |
|   wifi_ssid   |      string       |  `""`   |

:::note
`wifi_ssid` & `wifi_password` are both **case sensitive** values.
:::

### wifi_ap_mode

A boolean value that toggles the [Software Access Point](#software-access-point)

#### Enable/Disable Software Access Point

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'CLI', value: 'cli'},
{label: 'Android', value: 'android'},
{label: 'iOS', value: 'iOS'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="cli">

```shell title="Enable SoftAP"
meshtastic --set wifi_ap_mode true
```

```shell title="Disable SoftAP"
meshtastic --set wifi_ap_mode false
```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### wifi_password

In [SoftAP](#software-access-point) mode, this is the password to access your device's WiFi. In [Client](#wifi-client) mode, this is your WiFi Networks password. This string is case sensitive.

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'CLI', value: 'cli'},
{label: 'Android', value: 'android'},
{label: 'iOS', value: 'iOS'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="cli">

```shell title="Set WiFi password"
meshtastic --set wifi_password mypassword
```

```shell title="Set WiFi password (with spaces)"
meshtastic --set wifi_password "my password"
```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### wifi_ssid

In [SoftAP](#software-access-point) mode, this is the SSID broadcast to access your device's WiFi. In [Client](#wifi-client) mode, this is your WiFi Networks SSID. This string is case sensitive.

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'CLI', value: 'cli'},
{label: 'Android', value: 'android'},
{label: 'iOS', value: 'iOS'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="cli">

```shell title="Set WiFi network"
meshtastic --set wifi_ssid mynetwork
```

```shell title="Set WiFi network (with spaces)"
meshtastic --set wifi_ssid "my network"
```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

## Details

### Software Access Point

With the SoftAP enabled, a DNS server will run on the device. The DNS server will respond to all DNS requests with the IP address of your device. This will simplify device discovery because you will not have to remember the device's IP – any unencrypted HTTP request will direct you to the right location.

If you set your SoftAP up using a client like the CLI and have a screen attached to your device, the final page will display something similar to the following:

```
WiFi: Software AP
IP: 192.168.42.1    (0/4)
SSID: myNetwork / PWD: myPassword (alternating)
http://meshtastic.local
      * * * * *
```

You should then be able to connect to the node using either the displayed IP address or the HTTP link.

#### Force SoftAP

You can also enable the SoftAP by following these directions:

- Hold down the user button
- Press and release the reset button
- Count to two
- Let go of the user button

This will reboot the device with the SSID set to `meshtasticAdmin` and the password set to `12345678`. Using the Force SoftAP method, once you reboot, the SoftAP will be turned off.

If you have a screen attached to your device, the final page will display something similar to the following:

```
WiFi: Software AP (Admin)
IP: 192.168.42.1    (0/4)
SSID: meshtasticAdmin / PWD: 12345678 (alternating)
http://meshtastic.local
      * * * * *
```

You should then be able to connect to the node using either the displayed IP address or the HTTP link.

### WiFi Client

With `wifi_ssid` & `wifi_password` populated, the device will now to connect to your network. Make sure you are in range of your WiFi. If you have a single device on your local network it's easy to connect to your device `http://meshtastic.local`. If you have multiple devices you will need to connect using their respective IP addresses.

If you have a screen attached to your device, the final page will display something similar to the following:

```
WiFi: Software AP (Admin)
IP: 192.168.42.1    (0/4)
SSID: myNetwork
http://meshtastic.local
      * * * * *
```

You should then be able to connect to the node using either the displayed IP address or the HTTP link.

### Disable WiFi

To disable WiFi completely, set `wifi_ap_mode` to `false`, and both `wifi_ssid` & `wifi_password` to an empty string `""`.

## Examples

### Enable WiFi (as client)

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'CLI', value: 'cli'},
{label: 'Android', value: 'android'},
{label: 'iOS', value: 'iOS'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="cli">

```shell title="Enabling WiFi Client"
meshtastic --set wifi_ap_mode false --set wifi_ssid mywifissid --set wifi_password mywifipassword
```

:::note
If your `wifi_ssid` or `wifi_password` contain spaces, be sure to put quotation marks around the whole thing:

```shell title="Example with spaces"
meshtastic --set wifi_ssid "my wifi ssid" --set wifi_password "my wifi password"
```

:::

</TabItem>
<TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

In the above example, the device will join a network with the SSID `mywifissid` and the password `mywifipassword`.

### Enable WiFi (as SoftAP)

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'CLI', value: 'cli'},
{label: 'Android', value: 'android'},
{label: 'iOS', value: 'iOS'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="cli">

```shell title="Software Access Point Example"
meshtastic --set wifi_ap_mode true --set wifi_ssid mywifissid --set wifi_password mywifipassword
```

:::note
If your `wifi_ssid` or `wifi_password` contain spaces, be sure to put quotation marks around the whole thing:

```shell title="Example with spaces"
meshtastic --set wifi_ssid "my wifi ssid" --set wifi_password "my wifi password"
```

:::

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

In the above example, the device will broadcast a network with the SSID `mywifissid` and the password `mywifipassword`.

### Disable WiFi Completely

<Tabs
groupId="settings"
defaultValue="cli"
values={[
{label: 'CLI', value: 'cli'},
{label: 'Android', value: 'android'},
{label: 'iOS', value: 'iOS'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="cli">

```shell title="Example - Disabling WiFi"
meshtastic --set wifi_ap_mode false --set wifi_ssid "" --set wifi_password ""
```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>