---
id: external-notification-plugin
title: External Notification Plugin Settings
sidebar_label: External Notification Plugin
---
import Tabs from '@theme/Tabs';
import TabItem from '@theme/TabItem';

:::warning
GPIO access is fundamentally dangerous because invalid options can physically damage or destroy your hardware. Ensure that you fully understand the schematic for your particular device before trying this as we do not offer a warranty. Use at your own risk.
:::

<!--- TODO add link to hardware setup to admonition--->
:::note
This plugin requires attaching a peripheral accessory to your device. It will not work without one.
:::

## Overview

The External Notification Plugin will allow you to connect a speaker, LED, or other device to notify you when a message has been received from the mesh network.

:::tip
Once plugin settings are changed, a **reset** is required for them to take effect.
:::

## Settings

| Setting | Acceptable Values | Default |
| :-----: | :---------------: | :-----: |
| ext_notification_plugin_active | `true`, `false` | `false` |
| ext_notification_plugin_alert_bell | `true`, `false` | `false` |
| ext_notification_plugin_alert_message | `true`, `false` | `false` |
| ext_notification_plugin_enabled | `true`, `false` | `false` |
| ext_notification_plugin_output | `integer` | `0` |
| ext_notification_plugin_output_ms | `integer` (milliseconds) | `0` |

### ext_notification_plugin_active

Specifies whether the external circuit is triggered when the device's GPIO is low or high.

#### Specify High/Low GPIO triggers circuit
<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

```bash title="GPIO active high"
meshtastic --set ext_notification_plugin_active true
```
```bash title="GPIO active low (default)"
meshtastic --set ext_notification_plugin_active false
```
  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### ext_notification_plugin_alert_bell

Specifies if an alert should be sent when receiving an incoming bell.

#### Enable/Disable alert on incoming bell
<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

```bash title="Enable alert on incoming bell"
meshtastic --set ext_notification_plugin_alert_bell true
```
```bash title="Disable alert on incoming bell"
meshtastic --set ext_notification_plugin_alert_bell false
```
  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### ext_notification_plugin_alert_message

Specifies if an alert should be sent when receiving an incoming message.

#### Enable/Disable Alert on incoming message
<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

```bash title="Enable alert on incoming message"
meshtastic --set ext_notification_plugin_alert_message true
```
```bash title="Disable alert on incoming message"
meshtastic --set ext_notification_plugin_alert_message false
```
  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### ext_notification_plugin_enabled

Enables the plugin.

#### Enable/Disable the plugin
<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

```bash title="Enable Plugin"
meshtastic --set ext_notification_plugin_enabled true
```
```bash title="Disable Plugin"
meshtastic --set ext_notification_plugin_enabled false
```
  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### ext_notification_plugin_output

Specifies the GPIO that your external circuit is attached to on the device.

#### Specify GPIO for circuit to monitor
<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

:::note
Replace `GPIO` in the below command with the GPIO number your circuit is attached to.
:::

```bash title="Specify GPIO that circuit is connected to"
meshtastic --set ext_notification_plugin_output GPIO
```
  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### ext_notification_plugin_output_ms

Specifies how long in milliseconds you would like your external circuit triggered. Default is `1000`. (Because of the way that defaults are handled in the protobufs `0` is interpreted as `1000`)

#### Specify how many milliseconds to trigger circuit
<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

```bash title="Set to default (1000ms)"
meshtastic --set ext_notification_plugin_output_ms 0
```
```bash title="Set to other value"
meshtastic --set ext_notification_plugin_output_ms 1500
```
  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>