---
id: serial-plugin
title: Serial Plugin Settings
sidebar_label: Serial Plugin
---
import Tabs from '@theme/Tabs';
import TabItem from '@theme/TabItem';

:::warning
GPIO access is fundamentally dangerous because invalid options can physically damage or destroy your hardware. Ensure that you fully understand the schematic for your particular device before trying this as we do not offer a warranty. Use at your own risk.
:::

:::note
This plugin requires attaching a peripheral accessory to your device. It will not work without one.
:::

## Overview

This is a simple interface to send messages over the mesh network by sending strings over a serial port.

:::tip
Once plugin settings are changed, a **reset** is required for them to take effect.
:::

## Settings

| Setting | Acceptable Values | Default |
| :-----: | :---------------: | :-----: |
| serialplugin_enabled | `true`, `false` | `false` |
| serialplugin_echo | `true`, `false` | `false` |
| serialplugin_mode | `integer` | `0` |
| serialplugin_rxd | `integer` (GPIO) | `0` |
| serialplugin_timeout | `integer` (seconds) | `0` |
| serialplugin_txd | `integer` (GPIO) | `0` |

### serialplugin_enabled

Enables the plugin.

<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

  ```bash title="Enable plugin"
  meshtastic --set serialplugin_enabled true
  ```
  ```bash title="Disable plugin"
  meshtastic --set serialplugin_enabled false
  ```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### serialplugin_echo

If set, any packets you send will be echoed back to your device.

<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

  ```bash title="Enable serialplugin_echo"
  meshtastic --set serialplugin_echo true
  ```
  ```bash title="Disable serialplugin_echo"
  meshtastic --set serialplugin_echo false
  ```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### serialplugin_mode

<!--- TODO --->

<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### serialplugin_rxd

Set the GPIO pin to the RXD pin you have set up.

:::caution
To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value.
:::

<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

:::note
Replace `GPIO` in the below command with the GPIO number your circuit is attached to.
:::

  ```bash title="Set RXD to GPIO pin number"
  meshtastic --set serialplugin_rxd GPIO
  ```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### serialplugin_timeout

The amount of time to wait before we consider your packet as "done".

<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

  ```bash title="Set serialplugin_timeout to 15 seconds"
  meshtastic --set serialplugin_timeout 15
  ```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>

### serialplugin_txd

Set the GPIO pin to the TXD pin you have set up.

:::caution
To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value.
:::

<Tabs
  groupId="settings"
  defaultValue="cli"
  values={[
    {label: 'CLI', value: 'cli'},
    {label: 'Android', value: 'android'},
    {label: 'iOS', value: 'iOS'},
    {label: 'Web', value: 'web'},
  ]}>
  <TabItem value="cli">

:::note
Replace `GPIO` in the below command with the GPIO number your circuit is attached to.
:::

  ```bash title="Set TXD to GPIO pin number"
  meshtastic --set serialplugin_txd GPIO
  ```

  </TabItem>
  <TabItem value="android">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="iOS">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
  <TabItem value="web">

:::info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
:::

  </TabItem>
</Tabs>