---
id: tdeck
title: LILYGO® T-Deck
sidebar_label: LILYGO® T-Deck
sidebar_position: 5
---

The T-Deck is a compact device featuring a 2.8-inch IPS LCD touch screen with a resolution of 320x240 pixels, integrated with a small keyboard, trackball, microphone and speaker running on an ESP32-S3 dual-core processor.

## Specifications

- **MCU**
  - ESP32-S3FN16R8 (WiFi & Bluetooth 5 LE)
- **LoRa Transceiver**
  - Semtech SX1262
- **Frequency options**
  - 915 MHz
  - 868 MHz
  - 433 MHz
- **Antenna**
  - U.FL/IPEX antenna connector for LoRa
- **Connectors**
  - USB-C

## Features

- LILYGO® backlit T-Keyboard
- Trackball
- 2.8 inch ST7789 SPI Interface IPS LCD (Resolution: 320 x 240)
- I2S Speaker/Microphone

## Keyboard Shortcuts

| Shortcut          | Function                                            |
|-------------------|-----------------------------------------------------|
| `alt` & `b`       | Toggle keyboard backlight on/off.                   |
| `alt` & `c`       | Toggle modifier function. `Fn` displayed on screen. |
| `alt` & `c` + `m` | Disable/Enable notifications.                       |
| `alt` & `c` + `q` | Quit/Cancel (message, canned message, etc.)         |
| `alt` & `c` + `t` | Tab Key (select channel/dm recipient)               |
| `alt` & `c` + `i` | Decrease screen brightness.                         |
| `alt` & `c` + `o` | Increase screen brightness.                         |
| `alt` & `c` + `g` | Toggle GPS.                                         |
| `alt` & `c` + `⎵` | Send network ping.                                  |

As of firmware version 2.3.9, there is a newly added modifier function key combo which allows additional shortcuts to be added. To enable the function key, you will press `alt` and `c` together; a small `Fn` will be displayed in the lower right of the screen. After the function key is enabled, you can press the key for the function you wish to execute. For example, to disable/enable notifications, you would press `alt` and `c` followed by `m`.

## Flashing

If you are having issues flashing the T-Deck, especially if it's your first attempt, you may need to manually place the device into Espressif's Firmware Download mode. Please follow the process below to do so.

:::warning

Do not proceed unless an antenna is connected to avoid possible damage to the device's radio.

:::

The following process will manually place the device into the Espressif Firmware Download mode:

1. Ensure the device's power switch is toggled OFF.
2. Press and hold the TRACKBALL.
3. Toggle device's power switch ON.
4. After 2-3 seconds, release the TRACKBALL button.
5. If the device screen is black and the backlight is off, the device is in the Firmware Download mode. If the backlight is on, repeat these steps.

With the device now in the Espressif Firmware Download mode, you can proceed with flashing using one of the supported flashing methods. It's generally recommended to use the [Web Flasher](https://flasher.meshtastic.org/). You can select "T Deck" from the device drop-down.

## Resources

- Firmware file: `firmware-t-deck-X.X.X.xxxxxxx.bin`
- Purchase Links:
  - US
    - [Rokland](https://store.rokland.com/products/lilygo-t-deck-portable-microcontroller-programmer-lora-915-mhz-h642)
  - International
    - [LilyGO Store](https://www.lilygo.cc/products/t-deck)
    - [AliExpress](https://www.aliexpress.us/item/3256805505920840.html)

![T-Deck](/img/hardware/LILYGO-T-DECK.webp)