---
id: mqtt
title: MQTT Module Configuration
slug: /settings/moduleconfig/mqtt
sidebar_label: MQTT
---

import Tabs from "@theme/Tabs";
import TabItem from "@theme/TabItem";

If your device is connected to Internet via wifi or ethernet, you can enable it to forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on the internet. One or more channels must also be enabled as uplink and/or downlink for packets to be transmitted from and/or to your mesh (See [channels](/docs/settings/config/channels#downlink-enabled)). Without these settings enabled, the node will still connect to the MQTT server but only send status messages.

The MQTT module config options are: Enabled, Server Address, Username, Password, Encryption Enabled, JSON Enabled, TLS Enabled, and Root Topic. MQTT Module config uses an admin message sending a `ConfigModule.MQTT` protobuf.

## Settings


## MQTT Module Config Values

### Enabled

Enables the MQTT module.

### Server Address

The server to use for MQTT. If not set, the default public server will be used.

### Username

MQTT Server username to use (most useful for a custom MQTT server). If using a custom server, this will be honored even if empty. If using the default public server, this will only be honored if set, otherwise the device will use the default username.

### Password

MQTT password to use (most useful for a custom MQTT server). If using a custom server, this will be honored even if empty. If using the default server, this will only be honored if set, otherwise the device will use the default password.

### Encryption Enabled

Whether to send encrypted or unencrypted packets to MQTT. This parameter is only honored if you also set server (the default official mqtt.meshtastic.org server can handle encrypted packets). Unencrypted packets may be useful for external systems that want to consume meshtastic packets.

### JSON Enabled

Enable the sending / consumption of JSON packets on MQTT. These packets are not encrypted, but offer an easy way to integrate with systems that can read JSON.

### TLS Enabled

If true, we attempt to establish a secure connection using TLS.

### Root Topic

The root topic to use for MQTT messages. This is useful if you want to use a single MQTT server for multiple meshtastic networks and separate them via ACLs.


## MQTT Module Config Client Availability
<Tabs
groupId="settings"
defaultValue="apple"
values={[
{label: 'Android', value: 'android'},
{label: 'Apple', value: 'apple'},
{label: 'CLI', value: 'cli'},
{label: 'Web', value: 'web'},
]}>
<TabItem value="android">

:::info

MQTT Config options are available for Android.

1. Open the Meshtastic App
2. Navigate to: **Vertical Ellipsis (3 dots top right) > Radio Configuration > MQTT**

:::

</TabItem>
<TabItem value="apple">

:::info

MQTT Config options are available on iOS, iPadOS and macOS at Settings > Modules > MQTT.

:::

</TabItem>
<TabItem value="cli">

:::info

All MQTT module config options are available in the python CLI. Example commands are below:

:::

|         Setting         | Acceptable Values |        Default      |
| :---------------------: | :---------------: | :-----------------: |
|      mqtt.enabled       |  `true`, `false`  |       `false`       |
|      mqtt.address       |     `string`      |`mqtt.meshtastic.org`|
|      mqtt.username      |     `string`      |       `meshdev`     |
|      mqtt.password      |     `string`      |     `large4cats`    |
| mqtt.encryption_enabled |  `true`, `false`  |        `false`      |
|    mqtt.json_enabled    |  `true`, `false`  |        `false`      |
|    mqtt.tls_enabled     |  `true`, `false`  |        `false`      |
|        mqtt.root        |     `string`      |                     |

:::tip

Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.

```shell title="Example:"
meshtastic --set mqtt.enabled true --set mqtt.json_enabled true
```

:::

```shell title="Enable/Disable MQTT Module"
meshtastic --set mqtt.enabled true
meshtastic --set mqtt.enabled false
```

```shell title="Enable/Disable MQTT JSON"
meshtastic --set mqtt.json_enabled true
meshtastic --set mqtt.json_enabled false
```

  </TabItem>
  <TabItem value="web">

:::info
All MQTT module config options are available for the Web UI.
:::

  </TabItem>
</Tabs>



## Connect to the Default Public Server

<Tabs
groupId="settings"
defaultValue="apple"
values={[
{label: 'Android', value: 'android'},
{label: 'Apple', value: 'apple'},
{label: 'CLI', value: 'cli'},
{label: 'Web', value: 'web'},
]}>

<TabItem value="android">

<h3>1. Enable the MQTT Module</h3>

Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > MQTT: Turn on the slider for **MQTT enabled** and tap **Send**.

[![MQTT Settings](/img/modules/mqtt/android_mqtt_sm.png)](/img/modules/mqtt/android_mqtt.png)

*Optional:* To use your phone's internet connection to send and receive packets over the web, also enable the slider for **MQTT Client Proxy** and skip the Configure Network Settings step below.

[![Client Proxy](/img/modules/mqtt/android_mqtt_proxy_sm.png)](/img/modules/mqtt/android_mqtt_proxy.png)

<h3>2. Enable Channel Uplink & Downlink</h3>

Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > Channels > LongFast: Turn on the sliders for **Uplink enabled** and **Downlink enabled**, then tap **Save** and tap **Send**.

[![Channel Settings](/img/modules/mqtt/android_channel_sm.png)](/img/modules/mqtt/android_channel.png)

<h3>3. Configure Network Settings</h3>

Navigate to: Vertical Ellipsis (3 dots top right) > Radio configuration > Network: Turn on the slider for **WiFi enabled**, Enter the **SSID** and **PSK** for your network, then tap **Send**.

[![Network Settings](/img/modules/mqtt/android_network_sm.png)](/img/modules/mqtt/android_network.png)

</TabItem>
<TabItem value="apple">

<h3>1. Enable the MQTT Module</h3>

Settings > MQTT - Turn on the slider for MQTT enabled - Tap **Save**

[![MQTT Settings 1](/img/modules/mqtt/apple_mqtt_1_sm.png)](/img/modules/mqtt/apple_mqtt_1.png)
[![MQTT Settings 2](/img/modules/mqtt/apple_mqtt_2_sm.png)](/img/modules/mqtt/apple_mqtt_2.png)

*Optional:* To use your phone's internet connection to send and receive packets over the web, also enable the slider for **MQTT Client Proxy** and skip the Configure Network Settings step below.

[![Client Proxy](/img/modules/mqtt/apple_mqtt_1_proxy_sm.png)](/img/modules/mqtt/apple_mqtt_1_proxy.png)

<h3>2. Enable Channel Uplink & Downlink</h3>

Settings > Channels > Primary Channel: Turn on the sliders for **Uplink enabled** and **Downlink enabled** - Tap **Save**

[![Channel Settings](/img/modules/mqtt/apple_channel_sm.png)](/img/modules/mqtt/apple_channel.png)

<h3>3. Configure Network Settings</h3>

Settings > Network: Turn on the slider for **WiFi enabled** - Enter your **SSID** and **PSK** for your network - Tap **Save**

[![Network Settings](/img/modules/mqtt/apple_network_sm.png)](/img/modules/mqtt/apple_network.png)

</TabItem>
<TabItem value="cli">

<h3>1. Enable the MQTT Module</h3>

```shell
meshtastic --set mqtt.enabled true
```

<h3>2. Enable Channel Uplink & Downlink</h3>

```shell
meshtastic --ch-set uplink_enabled true --ch-index 0
meshtastic --ch-set downlink_enabled true --ch-index 0
```

or chained together:
```shell
meshtastic --ch-set uplink_enabled true --ch-index 0 --ch-set downlink_enabled true --ch-index 0
```

<h3>3. Configure Network Settings</h3>

```shell
meshtastic --set network.wifi_enabled true
meshtastic --set network.wifi_ssid "your network"
meshtastic --set network.wifi_psk yourpassword
```

or chained together:
```shell
meshtastic --set network.wifi_enabled true --set network.wifi_ssid "your network" --set network.wifi_psk yourpassword
```

</TabItem>
<TabItem value="web">

<h3>1. Enable the MQTT Module</h3>

Config > Module Config > MQTT - Turn on the slider for MQTT enabled - Click the **Save** icon.

[![MQTT Settings](/img/modules/mqtt/web_mqtt_sm.png)](/img/modules/mqtt/web_mqtt.png)

*Optional:* To use your client's internet connection to send and receive packets over the web, also enable the slider for **Proxy to Client Enabled** and skip the Configure Network Settings step below.

[![Client Proxy](/img/modules/mqtt/web_mqtt_proxy_sm.png)](/img/modules/mqtt/web_mqtt_proxy.png)

<h3>2. Enable Channel Uplink & Downlink</h3>

Channels > Primary: Turn on the sliders for **Uplink Enabled** and **Downlink Enabled** - Click the **Save** icon.

[![Channel Settings](/img/modules/mqtt/web_channel_sm.png)](/img/modules/mqtt/web_channel.png)

<h3>3. Configure Network Settings</h3>

Config > Device Config > Network: Turn on the slider for **Enabled** - Enter your **SSID** and **PSK** for your network - Click the **Save** icon.

[![Network Settings](/img/modules/mqtt/web_network_sm.png)](/img/modules/mqtt/web_network.png)

</TabItem>
</Tabs>