--- id: store-and-forward-module title: Store & Forward Module Settings slug: /settings/moduleconfig/store-and-forward-module sidebar_label: Store & Forward --- import Tabs from "@theme/Tabs"; import TabItem from "@theme/TabItem"; :::info Currently only available for ESP32 based devices with external PSRAM. Requires the device to be set as a ROUTER or ROUTER_CLIENT. **Don't enable Store & Forward Module on multiple nodes.** ::: ## Overview :::caution This is a work in progress and is partially available. Stability is not guaranteed. ::: The Store & Forward Module is an implementation of a Store and Forward system to enable resilient messaging in the event that a client device is disconnected from the main network. Because of the increased network traffic for this overhead, it's not advised to use this if you are duty cycle limited for your airtime usage (EU_868 and EU_433) nor is it advised to use this for presets using SF11 or SF12 (e.g. all of the LongRange and VeryLongRange presets). ## Details ### How it works ![Store & Forward - Overview](/img/modules/store_and_forward/store_and_forward-overview.png) ### Requirements Initial Requirements: - Must be installed on a ROUTER or ROUTER_CLIENT node. - This is an artificial limitation, but is in place to enforce best practices. - Router nodes are intended to be always online. If this module misses any messages, the reliability of the stored messages will be reduced. - ESP32 Processor based device with external PSRAM. (tbeam > v1.0, T3S3, and maybe others) ### Usage Overview - To use / test this you will want at least 3 devices - One ESP32 device with PSRAM configured as a Meshtastic router. - Two others will be regular clients. Nothing special required. ### Meshtastic channel configuration Don't use this on the "LongRange" channel settings. You're welcome to try and report back, but those channels have a [low bitrate](/docs/overview/radio-settings#pre-defined). Either use a custom channel configuration with at an at least 1kbit data rate or use a Medium or Short range preset. ### Router setup :::warning Don't enable the Store and Forward module on multiple nodes for now! ::: - Configure your device as a router. - Name your router node something that makes it easily identifiable, aka "Router". - Configure the Store and Forward module ```shell title="Required - Enable the module" meshtastic --set store_forward.enabled true ``` ```shell title="Optional - Set maximum number of records to save to device" meshtastic --set store_forward.records 100 ``` :::tip Best to leave `store_forward.records` at the default (`0`) where the module will use 2/3 of your device's available PSRAM. This is about 11,000 records. ::: ### Client Usage Currently, no special configuration is required. To request your history sent to you, send the command into the message field "SF". That's it. This will eventually change to make it easier. At the moment, that message will be sent to everyone on the mesh but we'll (eventually) make it easier to use where there'll be a button (or maybe it'll be transparent) and the command isn't sent as a text message to the mesh. Available Commands: | Command | Definition | | :-----: | :----------------------------------------------------: | | SF | Send the last hour worth of messages I may have missed | The Store and Forward module will only service one client at a time. If a second client requests messages while the S&F is busy, the S&F will send a private message to the second client that they will need to wait. ## Settings ### Enabled Enables the module. ### Heartbeat The Store & Forward Router sends a periodic message onto the network. This allows connected devices to know that a router is in range and listening to received messages. A client like Android, iOS, or Web can (if supported) indicate to the user whether a store and forward router is available. ### History Return Max Sets the maximum number of messages to return to a client device. ### History Return Window Limits the time period (in minutes) a client device can request. ### Records Set this to the maximum number of records to save. Best to leave this at the default (`0`) where the module will use 2/3 of your device's available PSRAM. This is about 11,000 records. ### Client Config :::info Store and Forward Config options are available for Android. 1. Open the Meshtastic App 2. Navigate to: **Vertical Ellipsis (3 dots top right) > Radio Configuration > Store & Forward** ::: :::info Store and Forward configuration is not currently available via the Apple clients. ::: | Setting | Acceptable Values | Default | | :---------------------------------: | :---------------: | :-----: | | store_forward.enabled | `true`, `false` | `false` | | store_forward.heartbeat | `true`, `false` | `false` | | store_forward.history_return_max | `integer` | `0` | | store_forward.history_return_window | `integer` | `0` | | store_forward.records | `integer` | `0` | :::tip Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one. ```shell title="Example:" meshtastic --set store_forward.enabled true --set store_forward.history_return_max 0 ``` ::: ### Examples of CLI Usage ```shell title="Enable the module" meshtastic --set store_forward.enabled true ``` ```shell title="Disable the module" meshtastic --set store_forward.enabled false ``` ```shell title="Set store_forward.heartbeat to default" meshtastic --set store_forward.heartbeat 0 ``` ```shell title="Set store_forward.history_return_max to default" meshtastic --set store_forward.history_return_max 0 ``` ```shell title="Set store_forward.history_return_max to 100 messages" meshtastic --set store_forward.history_return_max 100 ``` ```shell title="Set store_forward.history_return_window to default" meshtastic --set store_forward.history_return_window 0 ``` ```shell title="Set store_forward.history_return_window to 1 day (1440 minutes)" meshtastic --set store_forward.history_return_window 1440 ``` ```shell title="Set store_forward.records to default (≈11,000 records)" meshtastic --set store_forward.records 0 ``` ```shell title="Set store_forward.records to 100 records" meshtastic --set store_forward.records 100 ``` :::info Store and Forward configuration is not currently available via the web client. :::