mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-15 18:14:19 -08:00
101 lines
3.6 KiB
Plaintext
101 lines
3.6 KiB
Plaintext
---
|
|
id: linux-native
|
|
title: Linux Native Application
|
|
sidebar_label: Linux Native
|
|
sidebar_position: 9
|
|
---
|
|
|
|
The device software can also run on a native Linux machine thanks to the [Portduino framework](https://github.com/geeksville/framework-portduino).
|
|
|
|
The application either simulates some of the interfaces, or uses the real hardware of your machine.
|
|
Device firmware from 1.3.42 and on even allows you to simulate the LoRa chip by sending and receiving Meshtastic packets via a local TCP port.
|
|
In this way, you can let multiple instances of the application communicate with each other as if they did via LoRa.
|
|
For instructions on how to use it, see the [interactive simulator](https://github.com/GUVWAF/Meshtasticator/blob/master/INTERACTIVE_SIM.md) that also emulates a wireless environment using simulated positions of the nodes.
|
|
|
|
## Usage with a Linux machine
|
|
|
|
The easiest way of building the native application is using Visual Studio Code with the PlatformIO extension.
|
|
See the instructions for creating such a building environment [here](/docs/development/firmware/build).
|
|
|
|
Then after opening the firmware repository in Visual Studio Code, simply click on the PlatformIO extension in the left bar, select native and click on 'Build'.
|
|
This will generate the binary file 'program' which you can find in `.pio/build/native/`.
|
|
Once in this directory or when you copied the file to your current directory, launch the application with `./program`.
|
|
|
|
Additional arguments can be given to the program, which are listed as follows:
|
|
|
|
- `-d DIRECTORY`: The directory to use as the virtual filesystem (VFS).
|
|
- `-e`: Erase the virtual filesystem before use.
|
|
- `-h MAC_ADDRESS`: The MAC address to assign to this virtual machine.
|
|
- `-p TCP_PORT`: The local TCP port to use for running the Meshtastic API.
|
|
|
|
## Usage with Docker
|
|
|
|
If you do not own a Linux machine, or you just want to separate things, you might want
|
|
to run the application inside a docker container.
|
|
|
|
### The Image
|
|
|
|
To build docker image, type
|
|
|
|
`docker build -t meshtastic/device .`
|
|
|
|
### Usage
|
|
|
|
To run a container, type
|
|
|
|
`docker run --rm -p 4403:4403 meshtastic/device`
|
|
|
|
or, to get an interactive shell on the docker created container:
|
|
|
|
`docker run -it -p 4403:4403 meshtastic/device bash`
|
|
|
|
You might want to mount your local development folder:
|
|
firmware
|
|
`docker run -it --mount type=bind,source=/PathToMyProjects/Meshtastic/Meshtastic-device-mybranch,target=/Meshtastic-device-mybranch -p 4403:4403 meshtastic/device bash`
|
|
|
|
### Build the native application
|
|
|
|
Linux native application should be built inside the container.
|
|
For this you must run container with interactive console
|
|
"-it", as seen above.
|
|
|
|
First, some environment variables need to be set up with command:
|
|
|
|
`. ~/.platformio/penv/bin/activate`
|
|
|
|
You also want to make some adjustments in the bin/build-all.sh to conform the amd64 build:
|
|
|
|
```shell
|
|
sed -i 's/^BOARDS_ESP32.*/BOARDS_ESP32=""/' bin/build-all.sh
|
|
sed -i 's/^BOARDS_NRF52.*/BOARDS_NRF52=""/' bin/build-all.sh
|
|
sed -i 's/echo "Building SPIFFS.*/exit/' bin/build-all.sh
|
|
```
|
|
|
|
You can build amd64 image with command
|
|
|
|
`bin/build-all.sh`
|
|
|
|
### Executing the application interactively
|
|
|
|
The built binary file should be found under name
|
|
`release/latest/bins/universal/meshtastic_linux_amd64`.
|
|
If this is not the case, you can also use the direct program name:
|
|
`.pio/build/native/program`
|
|
|
|
To use Python CLI against exposed TCP port 4403,
|
|
type this in the host machine:
|
|
|
|
`meshtastic --info --host localhost`
|
|
|
|
### Stop the container
|
|
|
|
Run this to get the ID:
|
|
|
|
`docker ps`
|
|
|
|
Stop the container with command:
|
|
|
|
`docker kill <id>`
|
|
|
|
> Tip: you can just use the first few characters of the ID in docker commands
|