mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-15 01:54:15 -08:00
62 lines
1.9 KiB
Plaintext
62 lines
1.9 KiB
Plaintext
---
|
|
id: quick-start
|
|
title: Quick Start Guide
|
|
sidebar_label: Quick Start Guide
|
|
sidebar_position: 1
|
|
description: The official Meshtastic guide to get you started fast.
|
|
---
|
|
|
|
import Link from "@docusaurus/Link";
|
|
|
|
## 1. Select hardware
|
|
|
|
If you haven't already purchased hardware, [find supported hardware](/docs/hardware/devices/index.mdx)
|
|
|
|
## 2. Connect Device
|
|
|
|
:::danger STOP! Put The Power Cable Down!
|
|
Never power on the radio without attaching an antenna as doing so may damage the radio chip!
|
|
:::
|
|
|
|
### Verify Data Cable
|
|
|
|
Some cables only support _charging_. Verify that your cable is also capable of _transferring data_ before proceeding. To verify, try connecting it to another device (like a phone) to see if you can copy a file to or from it.
|
|
|
|
## 3. Flash Firmware
|
|
|
|
Now that your device is connected, you can flash the latest firmware to your device.
|
|
|
|
<div className="indexCtasBody">
|
|
<div className="split-container">
|
|
<div className="split-item">
|
|
<Link
|
|
className={"button button--outline button--lg cta--button"}
|
|
to={"/docs/support-troubleshooting/flashing-firmware/esp32/"}
|
|
>
|
|
Flash ESP32 Firmware
|
|
</Link>
|
|
</div>
|
|
|
|
<div className="split-item">
|
|
<Link
|
|
className={"button button--outline button--lg cta--button"}
|
|
to={"/docs/support-troubleshooting/flashing-firmware/nrf52/"}
|
|
>
|
|
Flash nRF52/RP2040 Firmware
|
|
</Link>
|
|
</div>
|
|
</div>
|
|
</div>
|
|
|
|
## 4. Configure your region
|
|
|
|
To start communicating over the mesh, you must [configure your region](/docs/configuration/).
|
|
|
|
## 5. Start meshing!
|
|
|
|
Check out our [tips and best practices](/docs/getting-started/tips/) for the best experience.
|
|
|
|
With the antenna attached, the latest firmware, and your region configured, you can now start sending messages over the mesh!
|
|
|
|
For advanced configuration, check out the full [configuration documentation](/docs/configuration/).
|