mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-26 22:19:46 -08:00
29 lines
3.8 KiB
Plaintext
29 lines
3.8 KiB
Plaintext
---
|
|
id: error-codes
|
|
title: Critical Error Codes
|
|
sidebar_label: Error Codes
|
|
sidebar_position: 4
|
|
---
|
|
|
|
The device might report these fault codes on the screen, but it will also be outputted on the device serial output. If you encounter a fault code, please post on the forum and we'll try to help.
|
|
|
|
:::note
|
|
This table is derived from the [protobufs](https://buf.build/meshtastic/protobufs/docs/main:meshtastic#meshtastic.CriticalErrorCode)
|
|
:::
|
|
|
|
| Name | Number | Description |
|
|
| :--------------------------: | :----: | :---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
|
| TxWatchdog | 1 | A software bug was detected while trying to send LoRa. |
|
|
| SleepEnterWait | 2 | A software bug was detected on entry to sleep. |
|
|
| NoRadio | 3 | No LoRa radio hardware could be found. |
|
|
| Unspecified | 4 | Not normally used. |
|
|
| UBloxInitFailed | 5 | Failed while configuring a UBlox GPS. |
|
|
| NoAXP192 | 6 | This board was expected to have a power management chip, but it is missing or broken. |
|
|
| InvalidRadioSetting | 7 | The channel tried to set a radio setting not supported by this chipset; radio communication settings are now undefined. |
|
|
| TransmitFailed | 8 | Radio transmit hardware failure. Data was sent to the radio chip, but it did not respond with an interrupt. |
|
|
| Brownout | 9 | Main CPU voltage dropped below the minimum acceptable value. |
|
|
| SX1262Failure | 10 | Self-test of the SX1262 radio chip failed. |
|
|
| RadioSpiBug | 11 | A failure (likely software, possibly hardware) was detected while sending packets. If this occurs on your board, please post in the forum to help us collect information to fix this bug. |
|
|
| FlashCorruptionRecoverable | 12 | Corruption was detected on the flash filesystem, but it was repaired. |
|
|
| FlashCorruptionUnrecoverable | 13 | Corruption was detected on the flash filesystem, and it could not be repaired. _Note: Your node will likely need reconfiguration upon the next reboot (e.g., loss of region code)._ |
|