mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-15 01:54:15 -08:00
27 lines
1.4 KiB
Plaintext
27 lines
1.4 KiB
Plaintext
---
|
|
id: flashing-firmware
|
|
title: Flashing Firmware
|
|
sidebar_label: Flashing Firmware
|
|
pagination_next: getting-started/flashing-firmware/meshtastic-flasher
|
|
sidebar_position: 1
|
|
---
|
|
|
|
import Tabs from '@theme/Tabs';
|
|
import TabItem from '@theme/TabItem';
|
|
|
|
:::caution
|
|
Make sure not to power the radio on without first attaching the antenna! You could damage the radio chip!
|
|
:::
|
|
|
|
## Easiest Firmware install options
|
|
|
|
If you have RAK NRF based devices or a LilyGO T-Echo, [the drag and drop firmware installation process](/docs/getting-started/flashing-firmware/flashing-nrf52) is the easiest solution.
|
|
|
|
For ESP32 based device users (TBEAM, TLORA, Heltec etc.) we recommend using the [Meshtastic Flasher application](/docs/getting-started/flashing-firmware/meshtastic-flasher). It does a lot under the hood to prevent you from needing to use the terminal. It also allows you to configure your device.
|
|
|
|
## Manual Firmware Installation
|
|
|
|
Firmware can be downloaded from the [Downloads](/downloads) page. Your initial installation has to happen over USB from your Mac, Windows, or Linux computer.
|
|
|
|
If you choose to flash the firmware using the manual method, [ESP32 based devices](/docs/getting-started/flashing-firmware/flashing-esp32) and [NRF52 based devices](/docs/getting-started/flashing-firmware/flashing-nrf52) have different methods. Select the appropriate one. If you don't know what chipset your device is, take a look at our supported hardware section.
|