meshtastic/docs/getting-started/serial-drivers/serial-drivers-esp32.mdx
2023-01-21 10:32:24 -07:00

71 lines
2.2 KiB
Plaintext

---
id: esp32
title: ESP32 Serial Drivers
sidebar_label: ESP32 Drivers
sidebar_position: 1
---
import Tabs from "@theme/Tabs";
import TabItem from "@theme/TabItem";
import Link from "@docusaurus/Link";
## Install ESP32 USB to Serial Drivers
You may need to install a driver from Silicon Labs for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
Some newer boards may require the CH9102 (CH340/CH341) Driver.
<Tabs
groupId="operating-system"
defaultValue="windows"
values={[
{label: 'Linux', value: 'linux'},
{label: 'macOS', value: 'macos'},
{label: 'Windows', value: 'windows'},
]}>
<TabItem value="linux">
- [CP210X USB to UART bridge - Download](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
- [CH9102 Driver - Linux Download](http://www.wch-ic.com/downloads/CH341SER_LINUX_ZIP.html)
</TabItem>
<TabItem value="macos">
- [CP210X USB to UART bridge - Download](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
- [CH9102 Driver - MacOS Download](https://github.com/WCHSoftGroup/ch34xser_macos)
</TabItem>
<TabItem value="windows">
- [CP210X USB to UART bridge - Download](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
- [CH9102 Driver - Windows Download](http://www.wch.cn/downloads/CH343SER_ZIP.html)
- [CH9102 Driver - Windows Download (Direct Download for Windows 7)](https://github.com/Xinyuan-LilyGO/CH9102_Driver)
</TabItem>
</Tabs>
:::important
After installing the driver, make sure to reboot your computer to finish the installation process.
You can also [test your serial driver installation](/docs/getting-started/serial-drivers/test-serial-driver-installation) at this step if required.
:::
### Flash Firmware
After installing the serial drivers, you can now flash the Meshtastic firmware onto your device. To proceed, select the appropriate device type for your device.
<div className="indexCtasBody">
<Link
className={"button button--outline button--lg cta--button"}
to={"/docs/getting-started/flashing-firmware/esp32/"}
>
Flash ESP32 Firmware
</Link>
</div>